Turning stainless steel with Safety
Rodgau/Hannover, 23 September 2011 - Precision tool maker Safety presents 8624 at the EMO, its new cutting material for turning which replaces the current grade 8525.
The new high performance turning grade has an extremely tough MT-CVD coating (Medium Temperature Chemical Vapour Deposition) with high coating adhesion. The newly developed, fine grained high cobaltsubstrate withstands even higher temperatures resisting plastic deformation and preventing early formation of built-up edges. Due to the coatings alternating multiple layers of titanium carbonitride (TiCN - for abrasive wear resistance) and aluminium oxide (Al2O3 - for high temperature resistance) and a gold coloured surface layer of titanium nitride (TiN) on the rake face, edge chipping and damage are reduced. The manufacturer claims that the tool life of these coated inserts is considerably increased.
"Our new 8625 cutting material is a highly efficient and reliable solution for turning stainless steels," says Holger Rabe, managing director of Safety Germany, "with it we can cover 80 per cent of potential applications." Depending on the cutting geometry it is also extremely well suited to everything from light pre-finishing to roughing even with a continuous cut. As application tests at Safety's CEROC laboratory (Centre d'Etudes et de Recherche sur les Outils Coupants) in Fondettes, France have shown, the new grade is the material of choice for high cutting speeds (vc up to 240 m/min).
After the EMO, turning inserts in 8625 quality will be available from stock. The application area M25 is optimised for stainless steel (austenitic, ferritic, PH & Duplex), however low-carbon steels and alloys with a nickel or cobalt base can also be easily machined. Inserts are available in many commonly required sizes in both positive (PM4, PM5) and negative geometries (F5, M4, M5, M7, 5G) as well as KNUX shape inserts.
Caption: When turning stainless steel 8625 promises long tool life and extremely high cutting speeds combined with reliable machining and toughness. The new 8625 turning material from Safety in M25 quality is available in over 100 different ISO insert combinations.
Caption: Longer tool life, reliable machining and higher productivity: The multilayer, fine grain layers of the new 8624 turning material are extremely tough, temperature resistant and have a high layer of adhesion. The multilayered structure inhibits formation of hairline cracks.
Please provide copy of reprints
Safety, Rodgau: Comprehensive tool solutions - competent, flexible and fast
Safety, established in France in 1932, is an international manufacturer of precision tools for the metal cutting industry. The traditional company that employs about 500 employees all over the globe counts many famous names from the fields of Automotive, Aerospace, Die & Mould and Energy among its customers. Based on its own quality tools, activities focus on technical support and comprehensive tool solutions in standard and specialized fields: Together with Safety's specialists, users can quickly and flexibly optimize their production processes, increase productivity and reduce costs. In Germany, Safety is present with a sales office in Rodgau. www.safety-cuttingtools.com
Head of Marketing
Phone: +49 6106 268 48 15
Fax: +49 6106 268 48 22
Agentur für Public Relations GmbH
Ralf M. Haaßengier
Phone: +49 711 71899 03/04
Fax: +49 711 71899 05
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Turning stainless steel with Safety here
News-ID: 193209 • Views: 2397
More Releases from Safety Germany
Simplify manufacturing processes - Versatility of tools saves space and costs
Rodgau, August 15th, 2012 - Safety's carbide cutting tools ensure versatility, reliability and ease of use in milling, turning and drilling a variety of materials. Moreover, with its targeted insert program, the company always provides the appropriate combination of grades and geometries. Thus, daily machining processes can be easily optimized. Safety's tools are designed for a wide range of applications. They make manufacturing processes more flexible and streamline the tool
Box6 with UT25 grade: A six-insert box with a new turning grade for more savings
Rodgau, 26 July 2012 - Another novelty in the Safety program is the UT25, a universal turning grade. Users will love it, since UT25 reduces the variety of inserts needed thus saving storage room and cost. The new inserts made of the universal turning grade UT25 come in a six-insert box: space and cost saving. With the new "Box6" by Safety, less is sometimes really more: The UT25 grade provides
High feed rates for tool and mould makers
Safety unveils the new "Tetra HF" high speed milling cutter at the EMO Rodgau/Hannover, 23 September 2011 - The Tetra HF high feed rate milling cutter is a completely new addition to the milling cutter range of the French toolmaker Safety. It will be unveiled to the trade and public for the first time at this year's EMO. Equipped with four-sided, positive inserts and high performance cutting materials, this marvel of
Cutters to take off - With AEROLONG and AEROFINISH, Safety presents two high-per …
Safety at the EMO in Hannover from September 19th to September 24th: Hall 6, Booth A36 Rodgau, July 27th, 2011 - The French precision tool manufacturer Safety presents a double feature of milling cutters for fuselage and landing gear manufacturing in the aerospace industry: the long edge milling cutter AEROLONG and the fine finishing cutter AEROFINISH. Its close pitch makes the new AEROFINISH perfect for fine finishing. The tool bodies
More Releases for Logo
Logo Design Agency in UK | Logo Champ
There are piles of agencies in the UK Which are providing the logo design services yet our Logo design agency is very renown in the UK on account of we have a plethora of experienced employees who are giving the proper time to our clients and they all are very satisfied our agency. On the other hands, we have millions of customer all around the world who are with us since
Magnify Your Brand with Logo Design Studio
Summitsoft presents an alternative to paying big bucks for a professional logo designer or using complicated conventional software to try and do the job yourself. Logo Design Studio is designed with ease of use in mind, allowing brands to create professional looking logos in minimal time. To help users get started, it sports an enormous database of 2,000 templates and more than 6,000 scalable vector clipart. All graphical elements are
NH-ISAC Unveils New Logo
Kennedy Space Center, FL, July 19, 2016 – The National Health Information Sharing and Analysis Center, (NH-ISAC), a member-owned non-profit that is the health and public health sector’s trusted community for sharing cyber and physical security information, has unveiled a new logo. Using a blue globe and text and a gold EKG line, the logo better reflects the NH-ISAC today as a global community focused on healthcare security. “Our new
ShoppersChoice.com Unveils New Logo
ShoppersChoice.com, the leading online retailer specializing in bbq grills, patio furniture, firepits, gas logs, and more, has recently changed their corporate logo. With this new marketing concept, ShoppersChoice.com aspires to reinvent itself by changing its design to reflect its new branding. "ShoppersChoice.com is committed to growing and learning as a company." says their Executive Coordinator, Christine Assaf. "Our new logo reflects on what our company has become in the past 11 years;
RFID key fob ( Logo and Serial Number )
RFID Key Fob 1.Laser logo and number 2.40.5*32*4.2mm 3.App: Time & Attendance, access control 4.Chip: EM4102, Mifare 1k RFID key fob with an iron ring for the attachment. Excellent RFID keyfob feature: 1) Working Frequency: 125KHz / 13.56MHz (EM4100, EM4102, TK4100, Hitag1, Hitag2, Hitags 256, Mifare 1k, Mifare 4k, Mifare Ultralight, I-CODE, Fudan F08 ) 2) Operating Temperature:-25 to 55 (Centigrade) 3) ROHS:Compliant 4) ID Numbering: Inkjet Printing,Laser Engraving 5) Keychain:Available
Virtual Internet reveals new logo
London, UK, 15 November 2010: Virtual Internet has redesigned its logo as part of a full brand restructure taking place at the moment. The original VI logo, which has been used for 15 years, is made in 2 monochrome colours. The new logo has the same shape but rather prominent colour modifications that make new version look much more fresh and modern. The new look and feel aims to reflect the brand’s