Isotropic material for 3D printing Windform® P1 shortlisted for TCT Awards 2019
CRP Technology’s Windform® P1 has been shortlisted for the Materials Award – Polymers at the TCT Awards 2019, following some strong competition and an intensive review by TCT Expert Advisory board.
Windform® P1 is the inaugural new-born isotropic PA (polyamide) from the P-LINE family of materials for High speed production-grade 3d printing.
Franco Cevolini, VP and CTO at CRP Technology, “We are very pleased of this new nomination. Less than three months ago we were awarded [at the 3D Printing Industry Awards 2019, author’s note] as “Material company of the year” for our Windform® TOP-LINE composite materials.
Windform® P1 has been engineered for faster production of small end-use parts in higher volumes at lower cost, with detailed surface resolution. Furthermore, the quality and properties are similar to injection molding.
“Thanks to Windform® P1 – Franco Cevolini added - mass production with 3D printing is now a reality! At CRP Technology we are pursuing non-stop innovation on the road to high tech for production manufacturing. Stay tuned for our constant evolution.”
The award ceremony will take place on Wednesday 25 September 2019 at the Hilton Birmingham Metropole in Birmingham (UK) during the gala evening of the 2019 edition of the TCT Show.
Press Officer CRP Technology
via Cesare Della Chiesa, 150/C
CRP Technology is headquartered in Modena, Italy. It is distinguished by its know-how in Selective Laser Sintering technology. It offers part production for short- and low-run production, and prototyping services with advanced 3D Printing and Additive Manufacturing solutions. As a material provider, CRP Technology develops, manufactures and sells its proprietary material Windform® for Laser Sintering.
CRP Technology specific application fields including but are not limited to: automotive and motorsports, design, aerospace, UAVs, marine, entertainment, defense, and packaging.
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Isotropic material for 3D printing Windform® P1 shortlisted for TCT Awards 2019 here
News-ID: 1830295 • Views: 471
More Releases from CRP Technology
CRP Technology shines at Sachsenring racetrack
Positive debut for the Italian-based companies and Energica’s technological partners for MotoE CRP Technology and CRP Meccanica made their debut at Sachsenring racetrack during the inaugural weekend of MotoE (5 – 7 July 2019) as Energica technological partners. The series had been stopped due to the Jerez fire but thanks to the hard work of Energica team and the partners involved, all Ego Corsa motorcycles were rebuilt in less than three months. The
CRP Technology welcomes Windform® FR1 composite material for Additive Manufactu …
It is the first carbon-fiber-filled flame-retardant LS material to be rated V-0 Since mid-90’, CRP Technology has been changing the rules of additive manufacturing, smashing records and setting models nowadays that apply to the 3D printing technology with polyamide materials. A clear sign of this continued performance is Windform® FR1 (FR stands for Flame Retardant), the new-born material from the Windform® TOP-LINE family of composite materials for Additive Manufacturing. It is intended to
CRP Technology is part of ARTES 4.0
CRP's cutting-edge AM technologies at the service of the most innovative projects in the field of Advanced Robotics CRP Technology participates as an affiliated member to ARTES 4.0 association (Advanced Robotics and enabling digital TEchnologies & Systems 4.0). The new born association leads the homonymous Competence Center coordinated by the Scuola Superiore Sant’Anna, and it is characterized as a partnership that connect universities, research institutes and companies focused on innovation. ARTES 4.0 Competence
3D Printing and composite materials used for innovative aero-elastic wind tunnel …
CRP Technology collaborated with the Department of Aerospace Science and Technology of the Politecnico di Milano (PoliMi) on the construction of parts for the aeroelastic wind tunnel demonstrators for “Aeroelastic Flutter Suppression (AFS)” e “GLAMOUR” projects. The AFS project was launched by PoliMi and the University of Washington to test different active control system technologies aiming to attain Active Flutter Suppression. The GLAMOUR project was focused on technological optimization and experimental
More Releases for Windform®
CRP Technology welcomes Windform® P1, isotropic material for 3D Printing
Italian-based CRP Technology, market leader in AM technology, launches a new range of materials for professional 3D printing: the Windform® P-LINE. “P stands for Production”, commented Franco Cevolini, VP and CTO at CRP Technology, “we created this new range of materials for High Speed Sintering, the new 3D printing process we integrated in-house: Windform® P-LINE materials combined with HSS technology, allows for the manufacturing of small 3D printed production components. “Our aim”
New commercial strategy for Windform® composite materials
The Windform® materials in the worldwide selection of powders for Additive Manufacturing are esteemed as top-level in outstanding performance and mechanical properties. The aim of CRP Technology is to ensure the highest quality in the manufacture of 3D printed components in Windform®. This has characterized the modus operandi of CRP Technology for over 20 years. For this reason, the company has revised its commercial policy: Windform® composite materials will no longer be
CRP USA with Windform composite materials at Satellite Innovation 2018 to shape …
CRP USA will be attending Satellite Innovation 2018, the meeting place for Satellite Executives and Professionals, from October 9th to October 11th The event will be held at the Silicon Valley Computer History Museum (Mountain View, CA). Here, leaders of the satellite industry gather to share the latest industry trends and collaborate on new innovative ideas. CRP USA will be exhibiting at booth 18. They will be displaying cutting edge solutions for
CRP TECHNOLOGY SHORTLISTED FOR THE TCT AWARDS 2018
CRP Technology is finalist for the second year in a row for the TCT Awards: following some strong competition and an intensive review by TCT Expert Advisory board, Windform® RL has been shortlisted for the Materials Award – Polymers at the TCT Awards 2018. Windform® RL is CRP Technology’s first thermoplastic elastomer material within the Windform® family of materials for professional 3D Printing . TCT Awards 2018 are to be held at
Windform 3D printed Tundra-M drone
Windform® 3D Printing materials, which were originally developed for the motorsports industry, are now finding a diverse range of uses outside the race track, e.g. UAS field. The case study illustrates the manufacture of an unmanned aerial system using Laser Sintering technology and Windform® composite materials. The project has involved two companies: CRP Technology and Hexadrone. The aim is the construction of Hexadrone’s first fully modular and easy-to-use drone for industrial and
Windform®, the most appropriate composite materials for challenging and harsh a …
Windform® has passed the flammability UL 94 HB test and did not show degradation with VUV testing Windform® family of high performance composite materials by CRP Technology are unique in the field of Additive Manufacturing: the excellent thermal and mechanical properties make them the most suitable Laser Sintering materials to meet the demands of the most competitive and advanced sectors. Windform® composite materials guarantee high standards of flexibility, elasticity, resistance (to damage