Press release
Exact and fast residual oxygen measurement on site
µdox handheld meter
The μdox multi-parameter measuring device from OFS GmbH is reliable and easy to use. The content of oxygen in liquids is measured very quickly up to 1 ppb and thus up to very low concentrations (fast oxygen measurement: https://www.youtube.com/watch?v=KvyKDetkfGw).
Accredited laboratories are satisfied. Users like AWV-Dr. Busse GmbH: "With the μdox measuring case, we found an analyzer that emits accurate and fast measured values even in the trace range, especially in the oxygen measurement. This allows us to carry out safe and reliable analyzes. "This means that within a few minutes down to the lowest concentrations, up to 1 μg is analyzed.
The large, clear display and the user-friendly application additionally lead to fast measurements in the field or in production. Storing the measured values of up to eight measuring points leads to more flexibility on site.
Also possible is the simultaneous measurement of pH and redox in addition to the oxygen value. This provides the user with a better overall assessment of the sample without time changes. This makes representative measurements possible, especially for sensitive samples.
The robust, splash-proof housing and the handy measuring case make it possible to carry out the analyzes in a practical way. Thus, μdox offers a measurement quality that is comprehensively suitable for daily operations.
More information about µdox: https://www.water-monitoring.com/en/products/hot-water-and-steam-boiler-systems/udox/
Christina Schellbach
Tel.: +49 36602 51 24-261
Fax: +49 36602 51 24-29
c.schellbach@water-monitoring.com
www.water-monitoring.com
OFS Online Fluid Sensoric GmbH
Heidelbergweg 9
07580 Ronneburg
Germany
OFS GmbH is a medium-sized company with decades of expertise in industrial water treatment. Our goal is the environmentally conscious handling of the resource water. Our products include process water analysis, monitoring and control systems of process water and cooling / climate water. Our requirements for operational and process reliability, economy and environmental friendliness set new standards. As a developer and plant manufacturer, we pull the strings and offer customized overall solutions.
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Exact and fast residual oxygen measurement on site here
News-ID: 1817314 • Views: …
More Releases from OFS Online Fluid Sensoric GmbH
Making CLACK® softeners safer & more efficient
SaveCost C is the "guard" for a CLACK® water softener. This leads to more operational reliability and optimal utilization of the softener columns. The softener produces up to 160% soft water with less rinse water and salt. This reduces operating costs by up to 60%. The continuous maintenance of water softening systems is also reduced to a necessary level.
The automatic triggering of the regeneration on the CLACK® control head takes…
Less problems and costs at steam boiler and reverse osmosis
As a result of undetected defects in the water softener, the raw water will damage many industrial processes. If hard water flows into steam boilers or reverse osmosis, increased maintenance work up to production downtimes is conceivable.
For many industrial processes it is necessary to remove the hardening agents in the water. However, if technical problems with the water softener remain undetected, the hardness agents can form poorly soluble compounds, which…
Optimized water softening systems thanks to quality-controlled regeneration
Novel water hardness monitoring
Ion exchange units with sodium chloride regeneration have been increasingly used for more than 50 years for the production of soft water. The course and dynamics of the softening process depend on the ion exchange resins used, the proper regenera¬tion processes, the removal quantities and their dynamics.
These processes do not run constantly in practice, which is why resin capacities are not exhausted in all water…
More Releases for Accredited
Accredited Debt Relief Review 2022: (Buyers Beware!) Is Accredited Debt Relief A …
If you are drowning in debt, it could seem like there is nowhere you can turn. There are many organizations that can help you improve your money management and debt repayment.
You may feel more at peace and less bothered by regaining control. Accredited Debt Relief can be a partner to consider if you are currently evaluating your debt-reduction options. Try Accredited Debt Relief today, and you too will give testimonies.
https://bit.ly/Click-Here-To-Purchase--From-The-Official-Website
Overview…
CME Accredited World’s leading Heart Congress
Pulsus Conference, Host of CME Accredited World’s leading Heart Congress, 2nd Global Heart Congress, the conference that discusses the New Paradigm Approach for Promoting Health and Intervention Strategies in Cardiology, Cardiovascular and Healthcare Industries. CME accredited Heart Congress 2018 will provide interactive sessions regarding the Recent and Innovative aspect followed in the field of cardiology and Cardiac healthcare industries. We will be providing delegates, speakers and students with CME accreditation.…
Guyson SafeContractor Accredited
Leading industrial finishing equipment manufacturer Guyson International has received accreditation under the Alcumus SafeContractor scheme, which is accredited by UKAS, the UK’s national accreditation body for certification providers and they are also a member of SSIP (Safety Schemes in Procurement), ensuring that their accreditation services also follow best practice.
The scheme recognises excellence in health and safety management and confirms that Guyson’s health and safety processes have been externally assessed to make…
Alex Stewart International Accredited To ISO Standards
Alex Stewart International is delighted to announce to the industry that its head office and principal laboratories in Liverpool, England, United Kingdom – AS International Corporation Ltd - has been accredited by the United Kingdom Accreditation Service - UKAS - to ISO 17025 Standards.
The methods which have been accredited are as follows:
• Determination of Silver (Ag) in Copper Concentrates by Acid digestion
• Determination of Cobalt (Co) in Cobalt Hydroxides and…
New Accredited Obesity Education Module for Doctors
Almost 3 million deaths a year are attributed to obesity, making it the fifth highest risk factor for death globally. In addition, obesity increases the risk of complications from other co-morbidities such as diabetes (44%), ischaemic heart disease (23%) and many cancers (7-41%).[1] As obesity rates continue to hit the headlines, there is growing pressure on healthcare professionals (HCPs) to stay current on best practice management approaches for their patients.
Tackling…
CENIT accredited for Dassault Systèmes’ Exalead CloudView
Further expansion of the large Dassault product portfolio
Stuttgart, 14th June 2011 – In addition to the PLM solutions CATIA, DELMIA, ENOVIA, DYMOLA, SIMULIA and 3DVia CENIT has been accredited for Exalead CloudView as the first German partner. With that the consulting and software specialist CENIT expands its port-folio of Dassault Systèmes products and is one of a small number of partners in the European market with this wide range of…
