openPR Logo
Press release

Hdpe Blow Molding And Injection Molding Containers Market is forecasted to be valued at US$ 57,600.7 Mn by 2026 end. | Greif, Inc., Mauser Group B.V., SCHÜTZ GmbH & Co. KGaA, Time Technoplast Ltd., Duplas Al Sharq LLC, Mold Tek Packaging Ltd

07-08-2019 02:12 PM CET | Advertising, Media Consulting, Marketing Research

Press release from: PMR

Hdpe Blow Molding And Injection Molding Containers Market

Persistence Market Research (PMR) has published a new research report on HDPE blow molding and injection molding containers. The report has been titled “HDPE Blow Molding and Injection Molding Containers Market: Global Industry Analysis 2013-2017 and Forecast 2018-2026.” The proliferating demand for HDPE blow molding and injection molding containers is largely from the beverage, chemical & petrochemicals, and pharmaceuticals industries, owing to the barrier properties of HDPE and convenience in adoption along with multi-usability in comparison to its counterparts such as glass and metal.

A sample of this report is available upon request @ https://www.persistencemarketresearch.com/samples/22735

The core end-use industries targeted by manufacturers are the beverage industry and the chemical and petrochemicals industry. Both industries are projected to collectively hold approximately half of the global market share during the forecast period. HDPE containers are widely used in the beverage industry for the packaging of beverages in bottles. Germany and China are expected to be the key manufacturing countries in the HDPE blow molding and injection molding container market. The leading players operating in the global HDPE blow molding and injection molding container market are Greif, Inc., Mauser Group B.V., SCHÜTZ GmbH & Co. KGaA, Time Technoplast Ltd., Duplas Al Sharq LLC, Mold Tek Packaging Ltd., and Takween Advanced Industries, among others.

According to the report, the global HDPE blow molding and injection molding container market is anticipated to witness a CAGR of 5.3% from 2018 to 2026. The global HDPE blow molding and injection molding container market was worth US$ 36,438.3 Mn in 2017 and is forecasted to be valued at US$ 57,600.7 Mn by 2026 end.

Growing Consumer Convenience to Trigger High Product Demand

The global packaging industry has experienced noteworthy alteration in the last couple of decades. HDPE containers provide substantial lightweight advantages over containers made from other plastics. Moreover, HDPE containers are rigid and tough, and protect the content from chemicals and ultraviolet rays. HDPE is also less prone to puncture than its counterpart LDPE. The property of being lightweight yet with an ability to provide high strength is what ensures a higher preference for HDPE containers in the global market.

For instance, a lightweight HDPE container weighing around 2 ounces has the ability to handle the weight of 1 gallon of the product stored. The aforesaid properties provide HDPE with significant edge over other plastics in terms of consumer and market acceptance. To add to this, being strong and lightweight at the same time also contributes to a more sustainable packaging solution, which holds as much importance as the associated consumer convenience. The high sustainability factor is also anticipated to contribute considerably to the growth of the global HDPE injection molding and blow molding container market.

To view TOC of this report is available upon request @ https://www.persistencemarketresearch.com/methodology/22735

Barriers to Market Revenue Growth

HDPE – though more rigid than LDPE – has a poor gas barrier. There are certain reasons due to which HDPE might not be preferred for packaging. HDPE material is a low surface energy plastic, which makes it hard to bond. The surface either has to be treated with plasma, or a special adhesive has to be used, and these have to be procured as extra material. Due to high density, the structure of HDPE is more linear and therefore is crystalline. In addition, HDPE is flammable, can crack under stress, and has poor weathering resistance. The global market is also highly influenced by oil prices, which have an uncertain fluctuation curve. These factors are likely to restrict revenue growth of the global HDPE blow molding and injection molding container market.

Contact Us
Persistence Market Research
305 Broadway
7th Floor, New York City,
NY 10007, United States,
USA – Canada Toll Free: 800-961-0353

About Us
Persistence Market Research (PMR) is a third-platform research firm. Our research model is a unique collaboration of data analytics and market research methodology to help businesses achieve optimal performance.To support companies in overcoming complex business challenges, we follow a multi-disciplinary approach. At PMR, we unite various data streams from multi-dimensional sources. By deploying real-time data collection, big data, and customer experience analytics, we deliver business intelligence for organizations of all sizes.

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Hdpe Blow Molding And Injection Molding Containers Market is forecasted to be valued at US$ 57,600.7 Mn by 2026 end. | Greif, Inc., Mauser Group B.V., SCHÜTZ GmbH & Co. KGaA, Time Technoplast Ltd., Duplas Al Sharq LLC, Mold Tek Packaging Ltd here

News-ID: 1798932 • Views: 88

More Releases from PMR

Online Apparel Market Gain Impetus due to the Growing Demand over 2016 - 2026
The ecommerce sector have observed extraordinary growth over the past few years. The growth was primarily driven by prompt adoption of technology led by inclining use of devices such as tablets and smartphones as well as access to internet through 3G and broadband which ultimately resulted in inclination in the online consumer base. The growth showcased by some of the players such as snapdeal and flipkart exhibited immense potential of
Passenger Car Accessories Market Likely to Emerge over a Period of 2016 - 2026
The global passenger car accessories market enables unlock the potential for the companies which are striving in car accessories market. Continuous up gradation of models along with advanced features in car accessories enables fascinated most of people towards car accessories. The advanced car accessories offers a trendy look to car as well as comfort. The interior accessories such as MP3 players, LED screens, speakers and stereo devices offers entertainment while
Motorcycle Accessories Market Prophesied to Grow at a Faster Pace by 2016 - 2026
Improved economic outlook across the globe resulted into substantial increase in purchasing power of consumers over the past few years. Consequently, several industry verticals reported an increase in overall demand for respective products, and automotive industry is no different. However, different trends in sales reported across sub-segments within the automotive sector, but motorcycle sales has always remained impressive, particularly in high potential markets. Growth in global motorcycle market ascertained the
10-11-2019 | Health & Medicine
PMR
Natural Food Beverage Foaming Agent Market Detailed Analytical Overview by 2016 …
Introduction A foaming agent is a surfactant, which when present in small amounts, facilitates the formation of a foam, or enhances its stability by inhibiting the coalescence of bubbles. Natural Food & Beverage foaming agent are food additives which are used maintain the uniform dispersion of gases in aerated foods. Foam is produced with the help of trapping the gas bubbles and it is offered either in form of solid or

All 5 Releases


More Releases for HDPE

HDPE Pipe Market Report: Trends, Forecast and Competitive Analysis
According to a new market report published by Lucintel, the future of the global HDPE (High Density Poly Ethylene) pipe market looks promising with opportunities in potable water, wastewater, oil and gas, and irrigation sectors. The global HDPE pipe market is expected to reach an estimated $22.4 billion by 2024 and is forecast to grow at a CAGR of 3.8% from 2019 to 2024. The major growth drivers for this
HDPE Blow Molding and Injection Molding Containers Market 2026
Due to its intrinsic physical and mechanical properties, high density polyethylene (HDPE) is highly used as packaging materials in different industries including food, beverages, pharmaceuticals, cosmetics, homecare, chemicals, and petrochemicals. Urbanization, changing consumer preferences, and expanding middle class have significantly contributed to the rising demand for consumer goods. Increased demand for consumer goods has, in turn, revolutionized the packaging industry, especially plastic packaging. Polyethylene is most commonly used in the packaging
Global High-density Polyethylene (HDPE) Market -Surging Demand from Packaging In …
Scope of the Report: This report focuses on the High-density Polyethylene (HDPE) in global market, especially in North America, Europe, Asia-Pacific, South America, Middle East and Africa. This report categorizes the market based on manufacturers, regions, types and applications. Surging Demand from Packaging Industry to Boost Global High Density Polyethylene Market .Plastic packaging needs a large volume of the high density polyethylene as it is a core plastic in rigid packaging. Nearly
HDPE Pipes Market Overview and Forecast Report 2017 to 2022
Global HDPE Pipes revenue, share, overview, industry chain structure, types, applications,demand and projections to 2022. For this report, the HDPE Pipes value is provided for 2016 in USD millions, an expected CAGR % as well as USD million worth of industry in 2022. Regionally, the globe is segmented into United States, China, Europe, Japan, Southeast Asia and India to study their market size and local analysis. End user applications of HDPE
Global HDPE Packaging Market: Key vendors - Amcor, Bemis, Berry Plastics
Latest industry research report on: Global HDPE Packaging Market : Industry Size, Share, Research, Reviews, Analysis, Strategies, Demand, Growth, Segmentation, Parameters, Forecasts HDPE packaging is used in industries such as food, beverage, pharmaceuticals, and consumer goods. Its properties of stiffness, moldability, and chemical resistance make it suitable for use in making various types of packaging including bottles, containers, cartons, bags, and others. Almost 70% of HDPE produced is used in packaging,
Research Focuses on Global HDPE Geomembrane
HDPE Geomembrane Report by Material, Application, and Geography – Global Forecast to 2021 is a professional and in-depth research report on the world's major regional market conditions, focusing on the main regions (North America, Europe and Asia-Pacific) and the main countries (United States, Germany, united Kingdom, Japan, South Korea and China). The report firstly introduced the HDPE Geomembrane basics: definitions, classifications, applications and market overview; product specifications; manufacturing processes; cost structures,