openPR Logo
Press release

CASwell CAR-5058 - Highly Configurable High-Performance 2U Networking Appliance now available

05-23-2019 10:52 AM CET | IT, New Media & Software

Press release from: CASwell

CASwell CAR-5058

CASwell CAR-5058

New high-end 2U rackmount system with Intel Xeon Dual-CPU and flexible network design for up to 68 Ethernet ports

Taipei, Taiwan - May 23rd, 2019 - CASwell, a leading manufacturer of innovative and high-performance SD-WAN (uCPE/vCPE) and network security systems, is proud to announce the availability of the CAR-5058 rackmount appliance based on two Intel Xeon high-end processors and a highly configurable network architecture that allows up to 68 high-speed Ethernet ports together with up to four hard drives or SSDs.

The CASwell CAR-5058 uses the manufacturer's own designed network configuration with up to eight PCI Express connected, proprietary (NIN) modules that each provides a maximum of eight high-speed Ethernet ports for 64 network connections overall. Each network module is connected to the processors by PCI Express 3.0 x8 interface to guarantee the highest bandwidth. Even the NIP-88010 modules with two 100-Gigabit-Ethernet ports each can be implemented for the highest network performance if speed is more important than the number of Ethernet ports. Additionally, a standard network interface card can be plugged into the integrated PCI Express 3.0 slot to expand the number of possible Ethernet ports to 68.

One module slot in the front of the 2U appliance is already prepared for taking a removable hard disk drive (HDD) or solid state drive (SSD). For business purposes that need more storage, the CAR-5058 can be equipped with up to four removable HDDs or SSDs by replacing four network modules with three storage modules.

To power all these different networking and storage configurations, the CAR-5058 is based on two high-performance Intel Xeon Scalable Processors (Skylake-SP) using the well established Intel Purley platform. Supported is a comprehensive range of CPUs models from the Xeon Bronze 3104 with 6 cores and a low TDP of just 85 watts up to the Xeon Platinum 8180 with 28 cores. The processors of the CAR-5058 can be combined with up to 20 DDR4 ECC memory modules with speeds of 2666 or 2933 Mhz for a combined main memory of up to 1.5 TBytes. Two common redundant power supply units (CRPS) with 550 to 800 watts each (depending on configuration) provide the appliance with permanent electricity even in case of one failure while also being energy-efficient to save cost when the device is mostly idle. The CAR-5058 is also equipped with an LC monitor in the front panel to display status information and system messages for easy maintenance.

The CASwell CAR-5058 is already available and provides the best solution for industry sectors looking for a highly configurable and versatile high-speed networking device and can be equipped according to almost every customer demand or requirement.
Please contact your local CASwell representative or sales for any questions!

More information about the CASwell CAR-5058 can be found here: https://www.cas-well.com/product-information/car-5058.html

About CASwell

CASwell, Inc. was founded in 2007 by a group of engineers with a desire to create dynamic system solutions for embedded applications. While CASwell is a young company, it has proved itself to its customers with advanced technology, professional service and superior design and manufacturing capability by delivering a great portfolio of solutions based on Linux®. In 2014, the well-known IPC manufacturer Ennoconn Corporation (subsidiary of Foxconn Technology Group) decided to invest in CASwell, becoming the largest shareholder. CASwell has since become the subsidiary of Ennoconn, a member of Foxconn Technology Group. CASwell is dedicated to providing its customers with an unparalleled one-stop shopping experience for their network security and management needs.

CASwell Inc.
No. 242, Bo'ai Street
Shulin District
New Taipei City, 238
Taiwan

frank.schraeer@cas-well.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release CASwell CAR-5058 - Highly Configurable High-Performance 2U Networking Appliance now available here

News-ID: 1749971 • Views: 880

More Releases from CASwell

CASwell Releases CAF-026D - Classic SD-WAN, VCPE And Security Solution Reloaded
Fanless And Compact Network System Leveraging Updated Intel Atom Processor C-Series (Denverton-NS Refresh) For Higher Performance. 2022/6/28 - CASwell, a leading manufacturer of innovative and high-performance SD-WAN (uCPE/vCPE) and network systems, introduces the new CAF-026D fanless networking desktop system with Intel's upgraded Atom Processor C-Series (Denverton-NS Refresh) as a successor to its widely used CAF-0260/0262/0264/026B systems using the previous generation of Denverton-NS CPUs. With enhanced technology, the CAF-026D is an even
CASwell Announces Diverse CAR-5056 Versions Of High-End Network Server Switch At …
Different Configurations Of Sophisticated And Programmable Server System For Different Target Markets 2022/1/25 - CASwell, a leading manufacturer of innovative and high-performance SD-WAN (uCPE/vCPE) and network security systems, has announced the immediate and long-term future of its CAR-5056 network server switch during a presentation at Intel's Edge to Cloud Conference in Taiwan. This high-end dual Intel Xeon system with programmable Intel Barefoot Tofino Ethernet switch was announced last year and generated
CASwell Announces CAF-0100 - Fanless Network Appliance Based On Intel Atom "Elkh …
Energy-Efficient Desktop System Supporting Wi-Fi And 5G Or LTE Mobile Networks For SMB And SOHO CASwell, a leading manufacturer of innovative and high-performance SD-WAN (uCPE/vCPE) and network systems, announces the new CAF-0100, a fanless multi-networking appliance in desktop format. The CAF-0100 offers superior energy efficiency and high performance in a compact form factor with its new Intel Atom processor and up to six high-speed Ethernet ports plus supporting Wi-Fi and mobile
CASwell Offers CAR-5050 As Intel Select Solution For Visual Cloud Delivery Netwo …
Appliance Based On Dual 2nd Gen Intel Xeon Scalable Processors Is Verified And Ready For Deployment As Content Delivery Network Server (2021/11/23 ) CASwell, a leading manufacturer of innovative and high-performance SD-WAN (uCPE/vCPE) and network systems, is proud to announce that the outstanding CAR-5050 rackmount server has been officially verified by Intel as an Intel Select Solution for Visual Cloud Delivery Networks (VCDN). With two 2nd Gen Intel Xeon Scalable processors,

All 5 Releases


More Releases for Ethernet

Humidity Transmitters with Ethernet Interface
Beside the RS485 interface with Modbus RTU protocol, the EE310 humidity and temperature transmitter and the EE360 moisture in oil transmitter from E+E Elektronik now feature an Ethernet interface with Modbus TCP protocol. The EE310 and EE360 represent the latest generation of industrial transmitters from the Austrian sensor specialist E+E Elektronik. A multi-functional 3.5" TFT colour display provides a comprehensive overview of the measurement task and allows the user to
IOP Tester for Ethernet ECUs
RUETZ SYSTEM SOLUTIONS Tests ECUs for Interoperability RUETZ SYSTEM SOLUTIONS – experts for automotive data communications - provides an interoperability test platform for Automotive Ethernet. This IOP tester operates within the framework of compliance tests for Automotive Ethernet. The test platform constitutes a component of the test set-up for Open Alliance Layer 1 interoperability tests for ECUs. The IOP tester allows the verification of ECUs for interoperability with other ECUs
Perle Launches Industrial Ethernet Switches
Perle Systems, a global manufacturer of advanced Ethernet over Fiber and secure device networking solutions, announces its entry into the Industrial Ethernet Switch marketplace. Industrial-grade Ethernet Switches are specially designed to stand up to the extreme temperatures, vibrations, and shocks found in industrial automation, government, military, marine, rail, oil and gas, mining and outdoor applications. By launching over 200 models, Perle now clams the title of having the broadest range
Perle launches Ethernet Copper Extenders
NASHVILLE, TN—November 29th, 2012—Perle Systems, a global provider of advanced Ethernet over fiber and secure device networking solutions, today introduces Ethernet Copper Extenders. Perle Ethernet Extenders are designed for environments where network services are needed beyond the Ethernet limit of 328 feet (100 meters). With network demands often outpacing the original design, Network Administrators are frequently faced with their infrastructure operating at the brink of its capabilities. Copper-based Ethernet connections are
Perle launches 10 Gigabit Ethernet Media Converters
NASHVILLE, TN—September 19th, 2012— Perle Systems, a global provider of advanced Ethernet over Fiber and secure device networking solutions, today introduces 10 Gigabit Ethernet Media Converters. 10GbE Media Converters solve the problem of creating a 10 Gigabit Ethernet link that can be extended from 26 meters up to 160km. The demand for 10GbE is being driven by companies who want their data centers equipped to take advantage of the better performance
New Industrial Ethernet-Connectors from ESCHA
Halver, 26 March 2012 – The Halver/Germany based Connectivity- and Housing manufacturer ESCHA has extended its connectivity line for Industrial-Ethernet-Applications by several products that guarantee a fast and safe data transmission up to 10 Gbit/s. The new M12x1 round connectors with X-Coding as well as the new RJ45-Connectors are respectively available as field wireable- or overmolded variants. Moreover, the connectivity specialist is also introducing a device connection and