IOP Tester for Ethernet ECUs
RUETZ SYSTEM SOLUTIONS – experts for automotive data communications - provides an interoperability test platform for Automotive Ethernet. This IOP tester operates within the framework of compliance tests for Automotive Ethernet. The test platform constitutes a component of the test set-up for Open Alliance Layer 1 interoperability tests for ECUs. The IOP tester allows the verification of ECUs for interoperability with other ECUs for Layer 1, based on (100BASE-T1 / OABR). It offers an open application programming interface (API) and, so, is easy to integrate into existing test systems. Users can create their own tests and test sequences. Measurements of link-up time, signal quality and cable diagnosis belong within the scope of testing.
Compliance for Ethernet ECUs
The IOP tester is a component of the compliance verification process at RUETZ SYSTEM SOLUTIONS. The standardized test methods for Automotive Ethernet combine the new automotive standards with existing reliable and stable systems. Therefore, for component and ECU verification, the compliance verification process provides the necessary system and simplifies the introduction to this technology for new carmakers and suppliers.
RUETZ SYSTEM SOLUTIONS
With comprehensive expertise in data communication for automotive electronic systems, Ruetz System Solutions provides full service to carmakers and suppliers for a smooth and timely production start (SOP). The technology partner based in Munich offers engineering services for system specification and integration, Test Laboratories as a Service, compliance tests, technology assessment and training. Part of the test laboratory solutions are test systems and platforms. With broad competency in data bus systems for all in-car data transmission standards such as, amongst others, AVB, Bluetooth, CAN, Automotive Ethernet, FlexRay, LIN, MOST, USB and WLAN are supported competently and reliably by the general contractor. More information is available at www.ruetz-system-solutions.com.
RUETZ SYSTEM SOLUTIONS GmbH
81543 Munich, Germany
T +49 8151 9739098
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release IOP Tester for Ethernet ECUs here
News-ID: 325741 • Views: 2230
More Releases from Ruetz System Solutions
Data Logging: Intelligently and Efficiently
Ethernet Live Monitor by Ruetz System Solutions Optimizes Error Analysis in Real Time Ruetz System Solutions – experts in automotive data communications – present the new Ethernet Live Monitor (ELM) for intelligent and efficient error analysis of data transports in automotive networks. "The enormous amount of audio and video data (A/V) challenges data monitoring systems, with the result that loggers do not monitor permanently and thus only analyze audible and visible
Avnu Alliance and Ruetz System Solutions Announce First Authorized European Test …
Ruetz System Solutions to become lead partner in Avnu Alliance interoperability and conformance testing outside the United States. Avnu Alliance, the industry consortium driving open standards-based time sensitive networking through certification, announces Ruetz System Solutions as an authorized test house for Avnu Alliance. Ruetz System Solutions is the group’s first European Recognized Test Facility (RTF) for automotive Audio Video Bridging/Time Sensitive Networks (AVB/TSN) standards, including the Automotive Ethernet AVB Functional and
MTCM for MOST150 Coax Physical Layer Testing
RUETZ SYSTEM SOLUTIONS Introduces MOST Tester Cable Model as New Extension for Physical Layer Stress Test Tool RUETZ SYSTEM SOLUTIONS – experts in automotive data communications – now also provide coaxial physical layer testing for MOST150. The recently developed MOST Tester Cable Model "MTCM" is an extension of the well-proven Physical Layer Stress Test Tool "PhLSTT". "Our new MTCM meets the additional challenges and demands for physical layer testing that
More Releases for Ethernet
Humidity Transmitters with Ethernet Interface
Beside the RS485 interface with Modbus RTU protocol, the EE310 humidity and temperature transmitter and the EE360 moisture in oil transmitter from E+E Elektronik now feature an Ethernet interface with Modbus TCP protocol. The EE310 and EE360 represent the latest generation of industrial transmitters from the Austrian sensor specialist E+E Elektronik. A multi-functional 3.5" TFT colour display provides a comprehensive overview of the measurement task and allows the user to
Perle Launches Industrial Ethernet Switches
Perle Systems, a global manufacturer of advanced Ethernet over Fiber and secure device networking solutions, announces its entry into the Industrial Ethernet Switch marketplace. Industrial-grade Ethernet Switches are specially designed to stand up to the extreme temperatures, vibrations, and shocks found in industrial automation, government, military, marine, rail, oil and gas, mining and outdoor applications. By launching over 200 models, Perle now clams the title of having the broadest range
Perle launches Ethernet Copper Extenders
NASHVILLE, TN—November 29th, 2012—Perle Systems, a global provider of advanced Ethernet over fiber and secure device networking solutions, today introduces Ethernet Copper Extenders. Perle Ethernet Extenders are designed for environments where network services are needed beyond the Ethernet limit of 328 feet (100 meters). With network demands often outpacing the original design, Network Administrators are frequently faced with their infrastructure operating at the brink of its capabilities. Copper-based Ethernet connections are
Perle launches 10 Gigabit Ethernet Media Converters
NASHVILLE, TN—September 19th, 2012— Perle Systems, a global provider of advanced Ethernet over Fiber and secure device networking solutions, today introduces 10 Gigabit Ethernet Media Converters. 10GbE Media Converters solve the problem of creating a 10 Gigabit Ethernet link that can be extended from 26 meters up to 160km. The demand for 10GbE is being driven by companies who want their data centers equipped to take advantage of the better performance
New Industrial Ethernet-Connectors from ESCHA
Halver, 26 March 2012 – The Halver/Germany based Connectivity- and Housing manufacturer ESCHA has extended its connectivity line for Industrial-Ethernet-Applications by several products that guarantee a fast and safe data transmission up to 10 Gbit/s. The new M12x1 round connectors with X-Coding as well as the new RJ45-Connectors are respectively available as field wireable- or overmolded variants. Moreover, the connectivity specialist is also introducing a device connection and
Integrated Stepper Indexer/Drive with Ethernet Interface
Terryville, CT – Advanced Micro Controls Inc. (AMCI), releases their highly anticipated stepper motor indexer/drive package with network communication. AMCI’s new ANG1(E) integrates drive and motion control technology in one package, simplifying installation and cutting costs. The drive/controller communicates with the host PLC over the EtherNet/IP or Modbus-TCP network. Move commands are easily programmed through the host PLC’s software, and cabling is drastically reduced by expanding up to