Press release
Centellax Announces Webcast on Parallel Jitter Tolerance Testing of Multi-Channel Devices
Santa Rosa, Calif., April 8, 2011 - Centellax announced today they will be partnering with EDN for a live webcast on optimizing parallel jitter tolerance measurements in multi-lane channels and devices with multiple SERDES.This webcast will explain jitter tolerance testing in depth, with special emphasis on strategies for testing multiple lanes or devices in parallel. In addition, it also clarifies poorly understood concepts such as limit versus margin testing, dwell and recovery time, and the different search algorithms and their impact on repeatability.
“After the extreme success of our Crosstalk webcast last November, in both the USA and China, it was clear that our customers are interested in learning more about what Centellax has to offer,” states Steve Sekel, VP of Product Management at Centellax. Steve Sekel continues “Centellax has a lot of exciting new products and software. Our innovative solutions encompass leading edge technology and are still very affordable.”
The webcast will be held on April 20, 2011 from 11:00am to 1:00pm PST. The on-demand presentation will be available at the end of April at www.centellax.com. The webcast will be presented by William Sitch, Director of Test Solutions for Centellax, Inc.
For more information on JTOL visit: http://www.centellax.com/applications/jtol.
Centellax will also be offering the same webcast in Chinese through their China office in late May. Details of this webcast will be available at the end of April at www.centellax.com.
Established in 2001, Centellax delivers low-cost, high-performance test instruments, test accessories and electrical components for high speed communications and signal integrity applications. Corporate headquarters is located in Santa Rosa, CA.
Centellax Headquarters
3843 Brickway Blvd., #100, Santa Rosa, CA 95403, USA
phone: +1.707.568.5900 • sales: sales@centellax.com
Centellax China
Unit 3001B, International Chamber Of Commerce Tower, No.168, Fuhua Rd.3, CBD Futian District, Shenzhen 518026, P.R. China
phone: +86.755.33983599 • sales: sales-china@centellax.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Centellax Announces Webcast on Parallel Jitter Tolerance Testing of Multi-Channel Devices here
News-ID: 172105 • Views: …
More Releases from Centellax, Inc.
Centellax Announces 17G Stressed Serial BERT for 16x Fibre Channel (16GFC) and 1 …
SANTA ROSA, CALIF.----September 1, 2011—
Centellax announced today the release of a new 3-17G Stressed Serial BERT Solution (model #SSB17) intended for testing to 16x Fibre Channel (16GFC) and 14G InfiniBand FDR standards. This new test solution now offers the highest performance for compliance verification at rates between 3 and 17 Gb/s.
The SSB17 system contains a serial BERT controller (SSB16000 or SSB16000J) and full-rate pattern generator (PG17) and error detector (ED17)…
More Releases for Centellax
Bit Error Rate (BER) Tester Market 2022 Global Projection By Key Players -JDS Un …
The "Bit Error Rate (BER) Tester Market" Research Report details key growth drivers and opportunities to drive Market growth from 2022 to 2030. The Bit Error Rate (BER) Tester Market report is an intelligence report that has been meticulously conducted to investigate relevant and valuable information. The data surveyed is designed with both existing top players and upcoming competitors, growth prospects and development trends etc. The business strategies of key…
Bit Error Rate (BER) Tester Market Offering New Study Visions for 2027 & COVID …
This comprehensive Bit Error Rate (BER) Tester market report examines the sales and income share of major corporations. The market is divided into four sections: application, specific product, user experience, and geography. North America, Asia Pacific, Latin America, the Middle East and Africa, and Europe are among the important market regions covered. Key manufacturers are also listed here to assist new entrants into the business. It also demonstrates how the…
Bit Error Rate Testers (BERT) Market Segmentations and Key players: Tektronix, C …
Bit error rate testers are usually designed for testing radio telemetry systems, synchronous serial communication equipment, and communication links. The high rate of penetration of broadband communication and sharp rise in demand of the access lines are driving the need of communication links with high transmission capacity and very low bit error rate. When some data is transmitted over a particular communication channel, there is a probability of errors being…
Centellax Announces 17G Stressed Serial BERT for 16x Fibre Channel (16GFC) and 1 …
SANTA ROSA, CALIF.----September 1, 2011—
Centellax announced today the release of a new 3-17G Stressed Serial BERT Solution (model #SSB17) intended for testing to 16x Fibre Channel (16GFC) and 14G InfiniBand FDR standards. This new test solution now offers the highest performance for compliance verification at rates between 3 and 17 Gb/s.
The SSB17 system contains a serial BERT controller (SSB16000 or SSB16000J) and full-rate pattern generator (PG17) and error detector (ED17)…
Centellax, Inc. Releases SCS16000 Series of 16 GHz Stressed Clock Synthesizers
SANTA ROSA, CALIF.----February 1, 2011—
Centellax announced today the release of their new SCS16000 series of compact 16 Gb/s stressed clock synthesizers. There are currently 2 models in the series:
SCS16000: 16 Gb/s Stressed clock Synthesizer with sinusoidal jitter injection capability
SCS16000J: 16 Gb/s Stressed Clock Synthesizer with two tone sinusoidal jitter, true random jitter injection, and spread spectrum clock modulation capabilities.
This series has been designed from the ground up optimized for signal…
Centellax, Inc. Releases Windows-based Graphical User Interface for Multiple Ins …
SANTA ROSA, CALIF.----January 12, 2011—
Centellax announced today the release of their new Centellax Signal Integrity Studio (SIS) application, Version 1.0. SIS provides Centellax customers the ability to control multiple Centellax instruments through a Windows-based Graphical User Interface (GUI). This easy-to-understand interface allows for a more integrated and effective use of Centellax products. According to Steve Sekel, Centellax VP of Marketing, “SIS marks the beginning of the rich software applications that…
