Try and Buy - SEAL and Welte start attractive fair action in Germany

SEAL at the Fespa 2011: Hall A4, Stand B11

Try and Buy - SEAL and Welte start attractive fair action in Germany

Bückeburg, 6 April 2011 - The image finishing solutions and laminating specialist SEAL will be presenting its high quality image finishing products at the Fespa from 24 to 27 May in Hamburg (Hall A4, B11). The focus of their fair presence will be on the roller laminator SEAL 54 EL, produced in their own factory in the USA. The usual SEAL brand quality means this device is impressive even though it is classed as entry level.

Together with their general distributor for Germany, Welte in Freiburg, SEAL are presenting an attractive Try and Buy action at the Fespa, enabling a cost-effective entry into the business of image finishing and lamination. Users will receive a "Test licence" at a preferential price: They can then use the SEAL 54 EL for three months; after this period they can either purchase the roller laminator or return it.

"This gives print service providers the opportunity to test the business potential in the image finishing and laminating sector for their business without any financial risk", said managing director Frank Welte, explaining the background behind the action. "We deliver the machine. The accompanying installation and application video is fully sufficient to commission the machine on site."

Equipped with all basic functions, the roller laminator SEAL 54 EL is perfectly suited for the professional application of high-quality finishing and protective films, as well as double-sided adhesive films. The device delivers fully matured technology and the two silicone rollers provide a high level of uniform quality. This means that this powerful model can reliably process pressure-activated materials up to a thickness of 25 millimeters. The maximum width is 1400 millimeter, the working speed can reach up to 4 meters per minute.

"Users obtain everything they need with our new machine for the professional finishing of numerous materials using films", stated Frank Seemann, marketing and communications manager for the SEAL brand. "Single and double-sided cold lamination is possible. Our Fespa action aims to help print service providers in their decision to enter this market. If business is good, the machine essentially pays for itself."

In parallel, the same action will be running for the slightly wider SEAL 62 Base. The Fespa offer also means that users will receive, in addition to the machine, two rolls of protective and laminating foils of their choice, and a vat device for easier working with large format image processing templates.

SEAL has a comprehensive range of protective, finishing and mounting films in their product palette. Together with the right machine, the large selection of consumer materials always ensures perfect results for all mounting and laminating processes. Other professional models, in addition to the SEAL 54 EL, will also be displayed at the Fespa.

Pictures:

Fig. 1, 2 and 3: 54EL_Panel_01.jpg, 54EL_28.jpg and 54EL with woman
Caption: The SEAL 54 EL enables cost-effective entry into the finishing and laminating business. It is particularly suitable for the finishing of numerous materials with films. At the Fespa, users can purchase a "test licence" and then operate the machine for three months. They can then decide to purchase the machine or return it.
http://www.pr-x.de/uploadfiles/pictures//2909_154940_54EL_Panel_01.jpg
http://www.pr-x.de/uploadfiles/pictures//2909_154819_54EL_28.jpg
http://www.pr-x.de/uploadfiles/pictures//1110_155517_54EL%20mit%20Frau.jpg

Fig. 4: Photo of Frank Welte
Caption: "This gives print service providers the opportunity to test the business potential in the image finishing and laminating sector for their business without any financial risk", said managing director Frank Welte, explaining the background behind the action. "We deliver the machine. The accompanying installation and application video is fully sufficient to commission the machine on site."
http://www.pr-x.de/uploadfiles/pictures//0403_092202_Frank%20Welte1.JPG
http://www.pr-x.de/uploadfiles/pictures//0403_092412_Frank%20Welte2.JPG
http://www.pr-x.de/uploadfiles/pictures//0403_092532_Frank%20Welte3.jpg

Fig. 5: Frank Seemann
Caption: "Users obtain everything they need with our new machine for the professional finishing of numerous materials using films", stated Frank Seemann, marketing and communications manager for the SEAL brand. "Single and double-sided cold lamination is possible. Our Fespa action aims to help print service providers in their decision to enter this market. If business is good, the machine essentially pays for itself."
http://www.pr-x.de/uploadfiles/pictures//0102_092051_Neschen_People_Seemann_0004.jpg
http://www.pr-x.de/uploadfiles/pictures//0102_094533_Neschen_People_Seemann0001.jpg
http://www.pr-x.de/uploadfiles/pictures//0102_094708_Neschen_People_Seemann_003.jpg

Sample copy requested if published

SEAL - A brand made by Neschen AG, Bückeburg

The SEAL brand comprises a variety of protective and mounting films - it also represents high quality roll laminators, the corresponding adhesive films and the innovative UV liquid lamination. The SEAL liquid laminators and the relevant equipment is sold under the AquaSEAL label.
The SEAL brand products are available via a global retailer network; in Germany, the SEAL materials and -machines are available from Welte GmbH (www.weltenet.de) in Freiburg. www.sealgraphics.com

Press contact:

SEAL
A brand made by Neschen AG
Frank Seemann
Marketing /
Communications Manager
Windmühlenstr. 6
31675 Bückeburg, Germany
Telephone: +49 5722 207-253
Fax: +49 5722 207-77-253
F.Seemann@sealgraphics.nl
www.sealgraphics.com

PRX
Agentur für Public Relations GmbH
Ralf M. Haaßengier
Kalkhofstraße 5
70567 Stuttgart, Germany
Telephone +49 711 71899-03/04
Fax +49 711 71899-05
ralf.haassengier@pr-x.de
www.pr-x.de

This release was published on openPR.