Press release
The next generation of industrial terminals - Bizerba presents the iS70 PC terminal
As the successor to the tried and tested NT Terminal, the new iS70 terminal is setting new benchmarks for the future and particularly stands out because of its additional new high-performance features and interfaces to a wide variety of systems. The easy-to-clean, stainless steel terminal conforms with protection class IP 65, has an ergonomic and hygienic design and, just like its predecessor, is protected against dust and powerful water jets.
The iS70 is also available with a 39.12cm (15.4") display or a 48.3cm (19") with an LED backlight. The unique touch-screen technology increases operational comfort and safety, and is also robust in operation. The user interface is based on the new GFG Touch technology. This combines the benefits of the proven resistive touch-screen technology with a durable, thin top glass layer.
"With this new technology, the customer has a chemical- and scratch-resistant touch-screen surface at his disposal which can also be operated with chain gloves or the point of a knife without being damaged," explains Dieter Conzelmann, Director of Industry Solutions at Bizerba. "An entry-level resistive touch variant is, of course, available for both display sizes." The iS70 runs using the Windows Embedded Stand 7 (32bit) operating system.
Another feature: "The new terminal has an integrated WLAN connection. This can also be retrofitted on-site without any problems at all," says Conzelmann. "A new cable bushing also allows standard cables to be used, without these cables having any effect on the protection class. The unit can thus be integrated into existing production structures and networks and be connected to peripheral units."
With Intel Atom D510 and Intel Celeron processors, as well as the standard 2GB RAM of memory, the user has a modern and high-performance unit at his disposal. Optional memory of 4GB RAM is available for one model. The standard iS70 model has an 8GB hard drive. If the customer requires more storage space, an additional hard drive can also be built in. Six USB ports, one of which is available for external connections, three Ethernet interfaces (10/100/1000Mbit) and serial interfaces (also able to be electrically isolated, if required) guarantee connectivity to the widest range of unit environments. "The use of the NTscale software from Bizerba makes it possible to operate up to three different sets of scales," Conzelmann continues; "and all calibration-relevant data is displayed. Through the software, the customer has a customisable memory meaning that all weighing procedures are retraceable." Using NTscale, multi-interval and multi-range scales can also be connected. In addition, weighing data can also be transferred to higher-level systems, such as SAP for example, by implementing Bizerba's _connect.BRAIN software.
The unit is installed using a pedestal stand, a supporting column or using the standard VESA 100 wall bracket.
About Bizerba
Bizerba is a leading, worldwide-operating Solutions-provider offering professional system solutions in scale, label, information and food service technologies, in the retail, food industry, producing and logistic segments. Sector-specific hardware and software, high-performance network-compatible management systems as well as a wide selection of labels, consumables and business services ensure transparent control of integrated business processes and high-level availability of Bizerba-specific performance features.
Worldwide, Bizerba is present in over 120 countries – with 41 shareholdings in 23 countries, as well as 54 country distributors. The company’s headquarters, with a staff of 3,000, is located in Balingen, Germany. Further manufacturing facilities are located in Meßkirch, Bochum, Vienna (Austria), Pfäffikon (Switzerland), Milan (Italy), Shanghai (China), Forest Hill (USA) and San Luis Potosi (Mexico).
For enquiries, please contact:
Bizerba GmbH & Co. KG
Claudia Gross
Director Global Marketing and Communication
Wilhelm-Kraut-Straße 65
D-72336 Balingen
Germany
Telephone +49 7433 12-33 00
Fax +49 7433 12-5 33 00
E-mail: claudia.gross@bizerba.com
nic.pr
network integrated communication
Patrick Schroeder
Coburger Straße 3
53113 Bonn
Telefon +49 228 620 43 84
Telefax +49 228 620 44 75
E-Mail: patrick.schroeder@nic-pr.de
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release The next generation of industrial terminals - Bizerba presents the iS70 PC terminal here
News-ID: 169488 • Views: …
More Releases from Bizerba GmbH & Co. KG
Fully automatic dispatch system at Fachpack 2012
Bizerba shows how time and costs can be saved in parcel delivery (Hall 4, Booth 133)
Balingen, 18th August 2012. - Bizerba is presenting a logistics system, which automatically prepares parcels for dispatch, at Fachpack 2012 in Nurnberg from 25th to 27th September (Hall 4, Booth 133). It weighs and dimensions them, calculates the cheapest mode of dispatch and prepares the dispatch note label. All devices and belts can be controlled…
Unique on the market: dynamic scales with four-cell weighing technology
Bizerba presents the die CWL ecoflexx in-motion scales at Fachpack 2012
Balingen, 18th August 2012 - Bizerba is presenting the dynamic CWL ecoflexx in-motion scales at Fachpack 2012 in Nurnberg from 25th to 27th September (Hall 4, Booth 133). With a belt length of up to three metres, courier, express and parcel service providers can practically expect off-the-peg customised device configurations with this. The scales are approved as legal-for-trade with a…
Dispatch system: communication based on the plug and play principle
Bizerba presents the new _logisticsEngine.BRAIN software at Fachpack 2012 (Hall 4, Booth 133)
Balingen, 18th August 2012 - Bizerba is presenting the new _logisticsEngine.BRAIN software at Fachpack 2012 in Nurnberg from 25th - 27th September 2012 (Hall 4, Booth 133). It collects and manages data from scanners, scales and volume scanners and automatically forwards it to a dispatch system via a standardised interface based on the plug and play principle. Companies…
Increases profit: slice and portion to the exact gram
Bizerba launches the fully automatic Scaleroline A550 slicer on the market
Balingen, 16th August 2012 - Bizerba launches the further development of the A510 weighing and slicing machine on the market: the fully automatic Scaleroline A550. Thanks to immediate weighing after slicing, industrial food processing companies can reduce their give-away by up to 15 percent so that the slicer pays for itself within a year.
The Scaleroline A550 is suitable for automatic…
More Releases for Balingen
Bizerba (UK) Ltd Celebrates 150 Years in Business
Milton Keynes - June 2016: Bizerba celebrates its 150-year anniversary, not only in Germany, but all over the world. As it is impossible to join all Bizerba employees at a single place to celebrate this event, our CEO Andreas Kraut decided to personally visit most of the countries in the anniversary year in order to celebrate our anniversary with the employees. This month we welcome Andreas to Milton Keynes.…
Klaus von Hippel, the new Product Manager of „Checkweighing Systems“ at Bize …
Balingen, 30th August 2011 - Klaus von Hippel assumed his duties as the new Product Manager of "Checkweighing Systems" at Bizerba on 01 August 2011.
Before von Hippel (42) came on board at Bizerba , he worked in product management for Ishida, an international provider of weighing and packaging solutions. Prior to that he worked for over ten years in various international sales positions for OCS-Checkweighers.
"We at Bizerba extend a…
Bizerba employees celebrate their first family day
Andreas Wilhelm Kraut, Chair of the Management Board since 1st July, is stepping into his father's footsteps and is the fifth generation to take over the fortunes of the worldwide leading solution provider in many sectors. Just one day later he declares the future of Bizerba as a family company in a moving speech in front of 2,000 Bizerba employees and their guests.
Balingen, 11th July 2011 – Countless visitors…
A step with historical importance
Andreas Wilhelm Kraut takes on the chairmanship of the management of Bizerba
Balingen, June 30th 2011 – It is a step with historical importance for Bizerba: With effect from 1 July 2011 Andreas Wilhelm Kraut will take on the chairmanship of the management. That is the result of the meeting of the supervisory board on 15 April 2011. Therefore for the first time in 15 years, a shareholder and member of…
Not iPad but ScalePad - Premiere at the EuroShop: Bizerba presents the weighing …
Balingen, 25 February 2011 - New parts for the "K-flex", the modular PC till / scales system: the "KScalePad" weighing counter board – to date unique on the market in this form. From 26th February, it can be seen at the EuroShop 2011 in Düsseldorf (Hall 6, booth E56).
Bizerba has developed a weighing counter board that can be embedded into the counter surface and can even be used in the…
Area-wide service network provides short downtime periods
Balingen, 09th July 2010 - Bizerba is one of the international leading solution partners in the global growth markets of weighing and information technology as well as in terms of food service systems. Nevertheless, in order to ensure a high level of reliability with all the components installed, one thing is necessary: A well organised service which reacts quickly.
Over 1000 service technicians all over the world make sure that all…
