openPR Logo
Press release

Heating tape Market Estimated to Record Highest CAGR by 2018 to 2028,Fact.Mr Heating tape Market Segmented By type Silicon rubber heating tape, Fiber glass insulated heating tape, Samox heating tape; By use Electric Heat, Steam Heat; By end use Industrial

02-01-2019 10:36 AM CET | Advertising, Media Consulting, Marketing Research

Press release from: Fact.MR

Heating tape Market Estimated to Record Highest CAGR by 2018

Heating tape - Market Overview

Heating tape is a type of variety of cables and cords that can be installed on the roof and gutters to prevent ice dams or wrap around exposed pipes to prevent them from bursting in the snowy regions during winter. Heating tape is used to maintain or raise the temperature of a piece of equipment. For the roof, the heating tape must be minimally flexible, for the pipes, it is thin and supple. The heating tape is essentially resistive to heaters, and it carries a conducting wire that gets hot when electricity flows through it. Some heating tape also has an inline thermostat that monitors the temperature to prevent overheating. The need for heating tape is growing more in the snowy regions as it is mostly used for wrapping roof and pipe.

Heating tape - Market Dynamics

The heating tape has vast applications in the industrial sector, commercial and residential sector and transportation sector that were driving the market. The heating tape is mainly used as freeze protection in oil and gas industry, power generation, water and waste treatment plants and pharmaceuticals industry. The growth in the industrial sector drives the demand for the heating tape in the market. The heating tape is wrapped on pipes to protect it from freezing. It is also used for underfloor heating, roof and gutter heating. This is likely to enhance the demand for heating tapes and aid in the expansion of the heating tapes market. The heating tape market is going to increase, as it has a wide application in the snowy regions. It is also used for preventing condensation.

But the market for heating tape is hampered by heating traces, as it has a thermostat and temperature indicator for preventing overheating. So, it will decrease the market demand for heating tape.

Click here to subscribe Sample @ https://www.factmr.com/connectus/sample?flag=S&rep_id=2013 

Heating tape - Market Regional Analysis

In terms of regional demand, the Heating tape market can be segmented into seven regions: North America, Latin America, Europe, CIS & Russia, Japan, APEJ (Asia Pacific except Japan) and the Middle East and Africa. The North America shows higher growth in terms of demand and sales, the demand in cold regions will be more as compared to the other regions. The Europe and Japan markets show moderate growth in the market. The demand in Asia Pacific countries including India and South Korea will increase in the coming years. The other regions show a stagnant rate of growth for heating tape market.

Heating tape - Market- Key SegmentsAccording to the type, the heating tape can be segmented as

Silicon rubber heating tape
Fiber glass insulated heating tape
Samox heating tape
According to use, the heating tape is segmented as

Electric Heat
Steam Heat
According to the end use, the heating tape can be segmented as

Industrial
Commercial
Residential
Heating tape - Market- Key Manufacturer

The market player for heating tapes are HTS AMTEK CO, Wattco, CS hydo company, The Cary Company, C-T products company, hi tech furnance system, Anderson bolts, pretherm industries, Omega Engineering,  Flexotherm Brand Heated Products, OEM heaters, Tesa Tap, Clay bore lab, heater sensor, and Therm X.

Request/View TOC@ https://www.factmr.com/connectus/sample?flag=T&rep_id=2013 

Heating tape – Market Competitive Analysis

The heating market is fragmented because of its numerous applications in various sectors. The competition in market players is also high. The heating tape is available at specialty stores, which creates a competition among the market. Therefore, to remain in sync with the demand, the manufacturers should avail the products. And the other factor that may create competition is the technological advancement so the manufacture should come up with the innovative products at a cost efficient price.

This analytical research study imparts an all-inclusive assessment on the market, while propounding historical intelligence, actionable insights, and industry-validated & statistically-upheld market forecast. Verified and suitable set of assumptions and methodology has been leveraged for developing this comprehensive study. Information and analysis on key market segments incorporated in the report has been delivered in weighted chapters. A thorough analysis has been offered by the report on

Market Dynamics
Market Size
Market Segments
Demand & Supply Trends
Current Issues and Challenges
Companies and Competitor Landscape
Value Chain
Technology
Regional Segments Analyzed Include

North America (U.S., Canada)
Latin America (Mexico. Brazil)
Western Europe (Germany, Italy, France, U.K, Spain)
Eastern Europe (Poland, Russia)
Asia Pacific (China, India, ASEAN, Australia & New Zealand)
Japan
Middle East and Africa (GCC, S. Africa, N. Africa)
Compilation of authentic and first-hand intelligence, insights offered in the report are based on quantitative and qualitative assessment by leading industry experts, and inputs from opinion leaders & industry participants around the value chain. Growth determinants, macroeconomic indicators, and parent market trends have been scrutinized and delivered, coupled with the market attractiveness for each market segment encompassed. Qualitative impact of growth influencers on the market segments across regions has also been mapped by the report.

Highlights from the Report

Elaborated scenario of the parent market
Transformations in the market dynamics
Detailed segmentation of the target market
Historical, current and forecast market size based on value and volume
Latest industry developments and trends
Competition landscape
Strategies adopted by the market players and product developments made
Potential and niche segments, along with their regional analysis
Unbiased analysis on performance of the market
Up-to-date and must-have intelligence for the market players to enhance and sustain their competitiveness

Grow Your Business From Expert Advice: https://www.factmr.com/report/2013/heating-tape-market 

About US
Fact.MR is a fast-growing market research firm that offers the most comprehensive suite of syndicated and customized market research reports. We believe transformative intelligence can educate and inspire businesses to make smarter decisions. We know the limitations of the one-size-fits-all approach; that’s why we publish multi-industry global, regional, and country-specific research reports.

Contact Us
Rohit Bhisey
Fact.MR
11140 Rockville Pike
Suite 400
Rockville, MD 20852
United States
Email: sales@factmr.com
Web: https://www.factmr.com/
Blog: https://factmrblog.com/
Read Industry News at - http://theguardiantribune.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Heating tape Market Estimated to Record Highest CAGR by 2018 to 2028,Fact.Mr Heating tape Market Segmented By type Silicon rubber heating tape, Fiber glass insulated heating tape, Samox heating tape; By use Electric Heat, Steam Heat; By end use Industrial here

News-ID: 1552920 • Views:

More Releases from Fact.MR

Insulated Drinkware Market to Hit USD 2.57 Billion by 2033 | YETI, Thermos L.L.C., Hydro Flask Lead - Fact.MR
Insulated Drinkware Market to Hit USD 2.57 Billion by 2033 | YETI, Thermos L.L.C …
The global insulated drinkware market was valued at US$ 1.39 billion in 2023 and is forecasted to expand at a 6.3% CAGR over the next ten years. Worldwide sales of insulated drinkware are projected to reach US$ 2.57 billion by 2033-end.This robust growth is driven by increasing consumer awareness of sustainability, rising participation in outdoor activities, and the growing demand for reusable, eco-friendly products amid bans on single-use plastics. The market
Digital Twin Market is Growing at a CAGR of 34.3% d by 2033 | Key Players: ABB Ltd, ANSYS, Inc, AT&T Inc, AVEVA Group plc, Bentley Systems
Digital Twin Market is Growing at a CAGR of 34.3% d by 2033 | Key Players: ABB L …
Digital Twin Market is valued at USD 5 billion in 2023 and is projected to expand at a compound annual growth rate (CAGR) of 34.3%, reaching USD 95 billion by 2033. This explosive growth is driven by the increasing adoption of digital twins across industries to optimize operations, reduce costs, and enhance decision-making through virtual replicas of physical assets. Digital twins integrate IoT, AI, and data analytics to simulate real-world
Hemato Oncology Testing Market is Forecasted to Reach USD 23.64 Billion by 2033 | Fact.MR Report
09-02-2025 | Health & Medicine
Fact.MR
Hemato Oncology Testing Market is Forecasted to Reach USD 23.64 Billion by 2033 …
The global hemato oncology testing market is valued at USD 4.33 billion in 2023 and is projected to expand at a compound annual growth rate (CAGR) of 18.5%, reaching USD 23.64 billion by 2033. This rapid growth is driven by the increasing prevalence of blood-related cancers, such as lymphoma and leukemia, and advancements in diagnostic technologies like next-generation sequencing (NGS) and polymerase chain reaction (PCR). Hemato oncology testing plays a
Osseointegration Implants Market is Anticipated to Reach USD 6.85 Billion by 2035
09-02-2025 | Health & Medicine
Fact.MR
Osseointegration Implants Market is Anticipated to Reach USD 6.85 Billion by 203 …
Osseointegration Implants Market is poised for robust growth, with its valuation projected to rise from USD 3.17 billion in 2025 to USD 6.85 billion by 2035, reflecting a compound annual growth rate (CAGR) of 8%. This expansion is driven by the increasing prevalence of orthopedic and dental disorders, such as osteoarthritis, rheumatoid arthritis, and edentulism, which necessitate advanced implant solutions. Osseointegration implants, which fuse directly with bone to provide stable

All 5 Releases


More Releases for Heat

Global Ceramic Heat Sink Heat Sink Market Drivers Analysis 2025
According to our (Global Info Research) latest study, the global Ceramic Heat Sink Heat Sink market size was valued at US$ million in 2024 and is forecast to a readjusted size of USD million by 2031 with a CAGR of %during review period. This report is a detailed and comprehensive analysis for global Ceramic Heat Sink Heat Sink market. Both quantitative and qualitative analyses are presented by manufacturers, by region &
Plate Fin Heat Sinks vs. Heat Pipe Heat Sinks: Which is Right for Consumers?
In the modern industrial landscape, heat sinks [https://www.coolerchina.com/] play a crucial role in ensuring the stable operation and longevity of equipment by effectively dissipating heat generated by devices into the surrounding environment. Among the numerous types of heat sinks available, plate fin heat sinks and heat pipe heat sinks are two of the most common. This article will compare these two types, helping you choose the right one for your
Efficient Heat Transfer Solutions: Global Heat Pipe Heat Exchanger Market to Rea …
As per the study initiated by Evolve Business Intelligence, the global Heat Pipe Heat Exchanger market size accounted for USD 18.2 Billion in 2022, growing at a CAGR of 6.5% from 2023 to 2033. The Heat Pipe Heat Exchanger (HPHE) Market refers to the global market for heat exchangers that use heat pipes as a primary heat transfer element. Heat pipe heat exchangers are used in a wide range of
India Heat Exchangers Market Size Set For Explosive Growth | Radiant Heat Exchan …
The India heat exchangers market accounted for $454.4 million in 2018, and is anticipated to reach $890.0 million by 2026, registering a CAGR of 8.6% from 2019 to 2026. Heat exchanger is a system designed to efficiently transfer energy between two or more fluids. The production of heat exchangers is a highly labor-intensive process, attributable to the long welding hours. Thus, heat exchangers are preferably manufactured in India, owing to
Exclusive Report on Heat Pipe Heat Exchanger Market: Heat Pipe Heat Exchanger Ma …
According to the study published by Evolve business intelligence, “The global Heat Pipe Heat Exchanger market size is expected to reach $ Billion by 2028 growing at the CAGR of 10% from 2021 to 2028. The report provides the reader with a deep-dive understanding of business opportunities, competitor analysis, market size and forecast, go-to-market strategy, and market share. After evaluating the next-gen business analytic report, the reader is directed to
Global Heat Pipe Heat Exchanger Market Research Report 2017
Summary This report studies Heat Pipe Heat Exchanger in Global market, especially in North America, Europe, China, Japan, Southeast Asia and India, focuses on top manufacturers in global market, with capacity, production, price, revenue and market share for each manufacturer, covering Mitsubishi Electric Corporation Nortek Air Solutions Munters Corporation Greenheck RenewAire DRI Innovative Air Solutions Reznor Zehnder America Ruskin Rooftop System Market Segment by Regions, this report splits Global into several key Regions, with production, consumption, revenue, market share and growth