Press release
New Version of the SAE J1939 Protocol Software
IXXAT now offers its SAE J1939 protocol software in an extended and revised version 2.02.Besides an adaptation of the user interface, which now allows an easy extension of the software functionality via optional modules, e.g. for NMEA 2000 and ISO 15 765, the support of J1939 devices with dynamically adjustable addresses has been improved.
The protocol software is completely written in ANSI-C. Required drivers, to adapt the software to the CAN controller and the target system, are offered as separate packages.
With the introduction of the new SAE J1939 protocol software, IXXAT also changes the licensing model and the prices of its J1939 products. Now, a "single channel" variant of the protocol software is available, which can be offered at attractive prices. Alternatively, the software is available as "Multi Channel" variant.
For more information about the IXXAT SAE J1939 products visit www.ixxat.com/j1939
IXXAT Automation is a leading provider of data communication products and services for the automation and automotive industries. The company focuses on industrial communication systems based on CAN (CANopen, DeviceNet), Ethernet (POWERLINK, EtherNet/IP, PROFINET, EtherCAT, Modbus-TCP), and TCP/IP with the associated transport protocols. Solutions for the automotive industry are mainly based on CAN (diagnosis protocols, SAE J1939), FlexRay, and LIN. IXXAT is experienced in the development of safety-oriented hardware and software in compliance with IEC 61508. In addition to designing system solutions and developing hardware and software, IXXAT supports the implementation and application of CAN and TCP/IP communication systems and offers training and consultation. The extensive product portfolio includes interface cards, test systems, analytical tools, and protocol software. Currently, the company employs a staff of 80, mostly electronics engineers and computer scientists. IXXAT has an ISO 9001-certified quality management system.
IXXAT Automation GmbH
Frank Pastors
Leibnizstr. 15
88250 Weingarten
Germany
Tel.: +49 . 751 . 561 46 - 0
Fax: +49 . 751 . 561 46 - 29
E-mail: info@ixxat.de
WWW: www.ixxat.de
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release New Version of the SAE J1939 Protocol Software here
News-ID: 153186 • Views: …
More Releases from IXXAT Automation GmbH
Real-time operating system support for IXXAT's CAN interfaces
ECI driver for QNX, INtime, RTX and Linux
With the current ECI driver IXXAT offers a powerful programming interface for its CAN PC interfaces, specially adapted to the requirements of embedded applications. CAN-based control and test systems can easily and quickly be achieved, both in the industrial and automotive area.
The latest version of the ECI (Embedded Communication Interface) is available for the operating systems QNX (6.5.0), INtime (3.14, 4.2, 5.0), RTX…
IXXEC-100 - The cost-effective EtherCAT Master solution for DIN rail mounting
With its new IXXEC-100, IXXAT offers a powerful and extremely flexible EtherCAT Master solution for DIN rail mounting at a very compelling price.
The EtherCAT Master functionality is provided using the proven protocol software from acontis for EtherCAT Master Class A and B devices. A specially optimized link layer allows the IXXEC-100 to operate with cycle times of less than 1 ms. The selected EtherCAT Master implementation, as well as the…
FRC-EP190 - Communication platform for automotive bus systems with extensive sof …
With its new FRC-EP190, IXXAT offers a universal hardware platform for FlexRay, CAN, LIN and K-Line with impressive performance, a reasonable price and a wide range of applications and solutions.
With increasing complexity in automobile technology, suitable solutions for communication with the control units are required - whether for the development, test benches or test driving. Such solutions must be inexpensive, easy to operate and robust. With the FRC-EP150 and the…
Software package for the development of CANopen applications under Microsoft Win …
IXXAT Automation is pleased to announce the immediate availability of version 6.1 of the CANopen Master API. In addition to previously supported CAN interfaces, CANopen Master API 6.1 now works with the new FPGA based CAN-IB200/PCIe active CAN interface.
With the CANopen Master API, IXXAT offers a proven solution for a quick and easy development of PC based CANopen® control, test and service applications under Microsoft Windows.
The new CANopen Master API…
More Releases for J1939
Vehicle and Engine Management System Monitoring with GW-7228
Engine management system is a build-in system to control and monitor the status of engine, such as engine speed, oil temperature, coolant temperature, oil pressure and other engine parameters. Engine manufacturers always integrate EMS system into engines for diagnostics purposes. EMS is communicated over CAN protocol with SAE J1939 bus. In order to read the engine parameters on computer, users must use protocol converter/ gateway to convert CAN bus to…
Diagnostic Extension for IXXAT's SAE J1939 Protocol Software
Along with the extension packages for NMEA2000 and ISO15765-2, IXXAT now offers the Diagnostic Extension package according to J1939-73 to extend the functionality of the SAE J1939 protocol software.
During the development of J1939 devices, the implementation of diagnostic services becomes more and more important. Diagnostic messages provide the utility needed when the vehicle is being repaired. They are also used during vehicle operation by the networked ECUs to allow them…
SAE J1939 Designer from IXXAT for cross-product configuration and design
With SAE J1939 Designer, IXXAT offers a cost-effective Windows-based tool for cross-product configuration and design. SAE J1939 Designer comes with a catalog, containing all user-specific parameters (SPNs) and messages (PGNs) defined within the J1939 standard. Thus, the corresponding values can be easily selected and assigned to the device during the definition process. In addition, the creation and maintenance of SPNs and PGNs is possible.
Using the integrated code generators, users can…
NMEA 2000 support for J1939 protocol software from IXXAT
Especially for the development of devices and systems for the maritime sector, IXXAT now offers an extension for its proven J1939 protocol software according to the NMEA 2000 standard. The extension enables the quick and cost-effective development of NMEA 2000 Level A&B Class 1 devices.
The NMEA 2000 Protocol of the National Marine Electronics Association defines messages and mechanisms for applications in the maritime sector.
Besides the "Fast Packet" protocol for rapid…
esd electronics, Inc announces the release of its newest software product, the e …
esd electronics, Inc SAE J1939 is a Controller Area Network (CAN) [ISO11898] based protocol developed to provide a standard architecture through which multiple Electronic Control Units (ECUs) on a vehicle can communicate. Based on the extended frame format (29-bit identifier) of the CAN 2.0B specification, it uses a fixed baud rate of 250 Kbit/s.
The esd J1939 Stack design allows quick development of applications supporting the SAE J1939 protocol. Written in…
SAE J1939 API for Microsoft Windows XP/Vista
With the new SAE J1939 API IXXAT offers the J1939 protocol software with a comfortable programming interface as a DLL for Windows XP/Vista and allows herewith the easy implementation of SAE J1939 applications on the PC. It is based on the VCI CAN driver and thereby supports all CAN interfaces form IXXAT.
The 1939 API is currently available for the programming languages C/C++ and Phyton. Support of the .NET framework…
