Metal Coatings Market Scenario Highlighting Major Drivers & Trends, 2018 - 2027 | Key Players - THE SHERWIN WILLIAMS COMPANY , DOWDUPONT , AKZO NOBEL , BASF SE , AXALTA COATING SYSTEMS , KANSAI PAINT , HEMPEL A/S , NIPPON PAINTS HOLDING
To Get Sample Copy of Report visit @ https://www.factmr.com/connectus/sample?flag=S&rep_id=2381
The substantial growth of new construction projects in the APEJ region is likely to influence the sales of metal coatings in the forthcoming years. China and India are the countries driving most of the demand in the metal coatings market. The demand for metal coatings with fewer layers and lower cure temperatures is also increasing by the industrial coatings customers. With new regulations, demand for the eco-friendly metal coatings with low or zero VOC is also visible in APEJ region. China is also planning to charge a tax on VOC emission for solvent-based paints and coatings.
The coating companies in China are also focusing on developing smart metal coatings for various industries. Meanwhile, research and development activities are also going on in the country, this is likely to result in some interesting opportunities for metal coatings companies worldwide.
Fluoropolymers Hold Largest Share in Metal Coatings Market
Providing excellent chemical and corrosion resistance, fluoropolymers are finding large application across various industries. The growth of fluoropolymers in metal coatings market is likely to remain positive with the demand exceeding 1,000’000 tons by 2018 end, as per the study by Fact.MR.
Fluoropolymers coatings are finding large application in architectural coatings exhibiting low surface energies, high resistance to water, chemicals, oils, and UV radiation, especially in exterior application.
Manufacturers in the metal coatings market are also focusing on designing new products to address concerns associated with perfluorooctanesulfonic acid and perfluorooctanoic acid found in many fluoropolymer chemicals. Owing to the need and manufacturing of lightweight materials in aerospace, automotive, and semiconductor industry, the demand for fluoropolymers is increasing in these industries.
Get complete report with Comprehensive table of contents @ https://www.factmr.com/report/2381/metal-coatings-market
Meanwhile, manufacturers in the metal coatings market have also started developing green fluoropolymers in response to the growing environmental impacts of various chemicals used in metal coatings. The demand for high-performance fluoropolymers is also rising with the large application in electronics, and non-stick coating on cookware.
Metal Coatings to Find Large Application in Architectural Industry
The architectural industry is likely to use metal coatings on a large scale mainly in steel and aluminum substrate. Innovation in steel technology, with the development of lightweight and composite steels, has led to the rise in steel based structures. While constant threat of corrosion of steel structures is driving the demand for metal coatings imparting anti-corrosion properties.
The use for metallic coatings and paints has also surged in the construction industry in order to provide a striking and vibrant surface effect. The rise in the use of standard metals including brass, aluminum, copper, and iron in the architectural and interior design projects has led to the increased demand for non-toxic and durable metal coatings.
Liquid fluoropolymer coatings have been used for a long time in the construction of buildings in North America. However, with the growing trend of green building construction, especially in North America, the use and demand for metal coatings in powder form has increased as compared to the liquid metal coatings made using solvents and emitting VOCs. Meanwhile, new generation of power metal coatings are also under development providing capability of liquid coatings.
The growth in the metal coatings market is likely to remain robust. The global demand for metal coatings is expected to reach 6.5% CAGR during the forecast period, 2018-2027.
Make an Enquiry before buying this report @ https://www.factmr.com/connectus/sample?flag=AE&rep_id=2381
Fact.MR is a fast-growing market research firm that offers the most comprehensive suite of syndicated and customized market research reports. We believe transformative intelligence can educate and inspire businesses to make smarter decisions. We know the limitations of the one-size-fits-all approach; that's why we publish multi-industry global, regional, and country-specific research reports.
11140 Rockville Pike
Rockville, MD 20852
Read Industry News at - https://www.industrynewsanalysis.com/
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Metal Coatings Market Scenario Highlighting Major Drivers & Trends, 2018 - 2027 | Key Players - THE SHERWIN WILLIAMS COMPANY , DOWDUPONT , AKZO NOBEL , BASF SE , AXALTA COATING SYSTEMS , KANSAI PAINT , HEMPEL A/S , NIPPON PAINTS HOLDING here
News-ID: 1520092 • Views: 166
More Releases from Fact.MR
Medical Device Contract Manufacturing Market Set for Strong Growth, Production F …
The medical device contract manufacturing market is poised to expand at a CAGR of 11.3% during the forecast period (2020-2026). This is attributed to rapidly evolving healthcare industry and increasing adoption of technologically advanced surgical procedures. A number of original equipment manufacturers (OEMs) and contract manufacturers have been focusing on advanced technologies such as robotics, 3D-printing, and minimally invasive surgeries. Mergers & acquisition activities among leading players have greatly accelerated
Fluid Management Market Expected to Grow Amid Covid-19, Finds Fact.MR
Growing prevalence of chronic disease and an expansion in numbers of geriatric population is leading to an upward facing growth curve for global fluid management market over the period of 2020 to 2025, states Fact.MR. It projects a compound annual growth rate or CAGR of about 5.3% for the market over this period, helping the market push its worth up significantly. It is significant to note here that while number of
Hand Sanitizer Market to Surpass US$ 2.8 Bn, Instant Hand Sanitizer Poised to Ho …
The global hand sanitizer market is set to surpass a value of ~US$ 1.4 Bn in 2020 and is anticipated to cross US$ ~2.8 Bn during the forecast period 2020-2030. The demand for gel-based sanitizer is on the rise as compared to foaming or spray sanitizer. Thus, manufacturers are focusing on developing gel-based sanitizers as they are widely used in multiple end-use industries. With the increased penetration of the online
Medical Marker Bands Market Grows on the back of Their Radiopacity and Cost-effe …
Radiopacity of medical marker bands is giving significant impetus to their demand in the medical marker bands market. The properties of medical marker bands that increases their visibility under fluoroscopes or x-ray during critical procedures is giving an uptick to their sales worldwide. Manufacturers of medical marker bands are also showing a marked preference for cost-effective materials such as polymer and tantalum instead of traditional gold, platinum and palladium. On
More Releases for Metal
Nanoparticles – Metal & Metal Oxides Market Size, Share | Industry Report 2026
The global Nanoparticles – Metal & Metal Oxides Market was valued at $5.2billion in 2018 and is forecast to grow at a modestxx.3 % CAGR between 2018 and 2026, culminating in 2026 global sales of $10.6billion. Nanoparticles – Metal & Metal Oxides have been widely studied for antimicrobial activities and it is known for their highly patent zinc oxide(ZnO), copper oxide (CuP), titanium oxide (TiO2), iron oxide (Fe3O4), include silver
Metal Foams Market
Metal Foams Market: Introduction Metal foams incorporates structured cellular material provided as cushion, insulation, vibration damping, or as a packaging application. These light weight cellular material, metal foams are popular in the market for its interesting combination of physical and chemical parameters that offers high stiffness, high compression strength and energy absorption. With the increasing industrial growth in every sector, including machineries, automotive, marine, military and others, the metal foams market is
Inorganic Metal Finishing Market
Global Inorganic Metal Finishing Market Insights, Forecast To 2025 report tracks the major market events including product launches, technological developments, mergers & acquisitions, and the innovative business strategies opted by key market players. The report also focuses on industry-specific drivers, restraints, opportunities and challenges in the Inorganic Metal Finishing market. This research report offers in-depth analysis of the market size (revenue), market share, major market segments, and different geographic regions,
Global Metal Detectors Market
The Metal Detectors Market report provides in-depth analysis of parent market trends, macro-economic indicators and governing factors along with market attractiveness as per segments. The report also maps the qualitative impact of various market factors on market segments and geographies. A sample of this report is available upon request @ http://www.persistencemarketresearch.com/samples/13111 Metal Detectors Market : Drivers and Challenges The global metal detectors market is expected to be significantly driven by increasing government investments
Market Intelligence Report Metal and Metal Oxide Nanoparticles, 2015-2025
Metal and metal oxide nanoparticles, also indicated as nanocrystals or nanopowders play a vital role in many areas of physics, chemistry and material science. These are available in variable shapes, sizes as well as surface coatings. Metal oxide nanoparticles offer a variety of functionalities that remain desirable over a number of segments such as anti-corrosion, anti-bacterialism, thermal barrier, easy-clean, UV- absorbent & combinations thereof. Metal and metal oxide nanoparticles are
ultra high frequency metal tags on metal for system (gyrfidstore)
RFID Disc Tags are widely used for inventory tracking system or Automatic production systems. The RFID Disc Tag can also work on metal surface with anti-metal layer on it, also can be attached to goods surface by adhesive layer. There are abundant size options from 12mm to 50mm. GYRFID presents several types with different material and size to suitable customer’s application. DIP Series- PVC Disc Tag, PVC Laminated, thickness of 1.0-1.2mm DIT