openPR Logo
Press release

Two Wheeler Fuel Injection System Market to Witness Growth Acceleration During 2015 - 2025

01-09-2019 01:55 PM CET | Logistics & Transport

Press release from: Future Market Insights

Two Wheeler Fuel Injection System Market to Witness Growth

The widespread demand for two wheelers now a days has been driving the market for the global two wheeler fuel injection system market. Increasing air pollution in the Asian areas and the introduction of the new technologies such as electronic fuel injection system has raised up the opportunities for the global two wheeler fuel injection system market.

Relatively the conventional carburettor fuel systems lacks efficiency in terms of fuel consumption and engine performances. It is also responsible for the emission of harmful gases that tends to pollute environment. Till now major bikes were working with the conventional carburettor system but now a days with the introduction of electronic fuel injection system, which is one of the most favourable and promising technologies, has attracted the attention of many. The electronic fuel injection systems also allows the vehicles to fulfil strict emissions legislations.

Request For Report Sample @ https://www.futuremarketinsights.com/reports/sample/rep-gb-518

The automotive industry is turning towards more and more developments in terms of technological advancements so as to attain fuel economy and reduce emissions which is directly increasing the need for the effective two wheeler fuel injection systems and thereby raising the global two wheeler fuel injection system market.

Two Wheeler Fuel Injection System Market: Drivers & Restraints

The increasing importance of clean economy and balance of the ecosystem is accompanied by governmental protocols is driving the global two wheeler fuel injection system market. Along with the environmental concerns, the cost saving factor and lower fuel consumption when compared to the conventional fuel injection systems will also support the growth of global two wheeler fuel injection system market. Easy installations, enhanced fuel economy and great engine performances are some driving factors for the newly introduced electronic fuel injection systems which are ultimately driving the global two wheeler fuel injection system market. The continuous technological advancements by the firms like Bosch (latest EFI systems that can be fitted to any two wheeler) are raising the global two wheeler fuel injection system market opportunities.

Two Wheeler Fuel Injection System Market: Segmentation

By technology the global two wheeler fuel injection system market is segmented as Electronic Fuel Injection System Market and Carburetted Fuel Injection System Market. The global two wheeler fuel injection system market is also segmented by the engine sizes which are as less than 100 CC, 101-150 CC, 151-250 CC, 251-500 CC and 501 and above.

Two Wheeler Fuel Injection System Market: Region-wise Outlook

The global two wheeler fuel injection system market is expected to register a favourable growth for the forecast period, 2015?2025. The Asia-Pacific is projected to endure its control on the global two wheeler fuel injection system market followed by Europe and North America. The APAC market is predominantly driven by the stern emission norms and increasing vehicles demand and subsequent production. Being the most populated countries in Asian region, India and China are the most favourable regions of growth.

With increasing government initiatives and stern norms by European Union for pollution control will drive the market for Europe in near future.

Request For Report Table of Content (TOC): https://www.futuremarketinsights.com/toc/rep-gb-518

Two Wheeler fuel Injection System Market: Key Players

The key market competitors in global two wheeler fuel injection system market are Delphi Automotive PLC, Robert Bosch GmbH, Ucal Fuel systems Ltd., Magneti Marelli S.p.A., Mikuni Corporation, Keihien Corporation etc.

About Us
Future Market Insights is the premier provider of market intelligence and consulting services, serving clients in over 150 countries. FMI is headquartered in London, the global financial capital, and has delivery centres in the U.S. and India.
FMI’s research and consulting services help businesses around the globe navigate the challenges in a rapidly evolving marketplace with confidence and clarity. Our customised and syndicated market research reports deliver actionable insights that drive sustainable growth. We continuously track emerging trends and events in a broad range of end industries to ensure our clients prepare for the evolving needs of their consumers.

Contact Us
U.S. Office
616 Corporate Way, Suite 2-9018,
Valley Cottage, NY 10989,
United States
T: +1-347-918-3531
F: +1-845-579-5705
Email: sales@futuremarketinsights.com
Web: https://www.futuremarketinsights.com/

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Two Wheeler Fuel Injection System Market to Witness Growth Acceleration During 2015 - 2025 here

News-ID: 1483513 • Views:

More Releases from Future Market Insights

Global Lithium Ion Battery Separator Market Projected to Reach US$ 3,256.7 Million by 2032
Global Lithium Ion Battery Separator Market Projected to Reach US$ 3,256.7 Milli …
The lithium-ion battery separator is a critical component in lithium-ion batteries, responsible for preventing short circuits and ensuring safe and efficient battery performance. It acts as a physical barrier between the positive and negative electrodes, allowing lithium ions to pass through while blocking the flow of electrons. With advancements in separator technology, these separators play a key role in enhancing battery capacity, cycle life, and overall safety in various applications,
Industrial Drums Market on a Trajectory to Reach US$ 17.6 Billion by 2027, Bolstered by a Robust 7.1% CAGR from 2022
Industrial Drums Market on a Trajectory to Reach US$ 17.6 Billion by 2027, Bolst …
The Industrial Drums Market is experiencing a steady and promising trajectory, with an estimated value of US$ 12.5 billion in 2022, projected to escalate to US$ 17.6 billion by 2027 at a commendable Compound Annual Growth Rate (CAGR) of 7.1%. This growth is substantiated by a 6.6% CAGR in volume during 2022-27, as per Future Market Insights. Anticipated to expand 1.5 times within this period, the market presents alluring prospects for industry
Supermarkets, Convenience Stores, and Eco-friendly Choices Fuel the Expansion of the Metal Cans Industry, Catering to Health-conscious and Environmentally-aware Consumers
Supermarkets, Convenience Stores, and Eco-friendly Choices Fuel the Expansion of …
The metal cans market is predicted to grow at a CAGR of 5% over the forecast period, according to research by Future Market Insights. The industry's estimated value is expected to increase from US$ 56 Bn in 2023 to US$ 91.1 Bn by 2033. The market for metal cans has been driven by the heightened demand for the product in food and beverages industry. Metal cans helps prolong shelf-life of perishable
Folding IBCs Market Poised for Growth: Expected to Reach US$ 528 Million by 2027 with a 4.8% CAGR
Folding IBCs Market Poised for Growth: Expected to Reach US$ 528 Million by 2027 …
The folding intermediate bulk containers (IBCs) market is on a growth trajectory, with an estimated value of US$ 418 million in 2022, projected to reach US$ 528 million by 2027, showcasing a Compound Annual Growth Rate (CAGR) of 4.8%. Remarkably, the China folding IBCs market defied initial pandemic-related skepticism and is anticipated to grow by 6.9% year on year in 2022. Despite global challenges, China's folding IBCs market is poised to contribute

All 5 Releases


More Releases for Fuel

Marine Gensets Market: Information by Vessel Type (Commercial Vessel, Defense Ve …
A marine genset is a power unit generator that supplies electricity to ships. It offers reliable and fuel-efficient electric power generation for onboard power, emergency gensets, and diesel-electric propulsion. It can be fueled by gas, diesel, hybrid fuel, and others. It has application in offshore commercial vessels, defense vessels, and offshore vessels, among others. Nowadays, most of the marine gensets are fueled by diesel. However, the introduction of alternative fuels
Fuel Card Market to 2027 - Global Analysis and Forecasts By Type (Branded Fuel C …
The global fuel card market is estimated to account US$ 6.29 Bn in 2018 and is expected to grow at a CAGR of 5.8% during the forecast period 2019 – 2027, to account to US$ 10.39 Bn by 2027. Request Sample Pages of “Fuel Card Market” Research Report @ www.theinsightpartners.com/sample/TIPRE00003099/?utm_source=openpr&utm_medium=10387 Fuel Card Market: Key Insights Fuel Card Market Size 2021, by manufacturer, region, types, and application, forecast till 2028 is analyzed and researched on
Solid Oxide Fuel Cell Market Revenue And In-Depth Analysis 2028 | Atrex Energy, …
This detailed market study focuses on data from different primary and secondary sources, and is analyzed using various tools. It helps to gain insights into the market's growth potential, which can help investors identify scope and opportunities. The analysis also provides details of each segment in the global solid oxide fuel cell market. According to the report, the growing implementation of solid oxide fuel cells in information centers is expected to
Clean Fuel Technology Market – Development Assessment 2025 | Clean Fuel Develo …
Global Clean Fuel Technology Market: Overview Clean technology in general implies the use of any service, product, or system that has as little of a negative impact on the environment as possible. Aspects of clean technology include the conservation of energy, sustainable resources, and clean sources of fuels. Clean fuels can refer to the use of renewable fuels such as biogas, or also blended fuels such as fossil fuels with renewable
Fuel Cell Interconnectors Market By Product Type Ceramic based, Metal based; By …
Global Fuel Cell Interconnectors Market Introduction A fuel cell is a battery that generates electricity through an electrochemical reaction where the fuel cell interconnector is a layer made up of either ceramic or metallic material, which combines the electricity generated by each individual cell. Fuel cell interconnectors are placed between each individual cell to connect the cells in the series. Ceramic fuel cell interconnectors are more suitable for high-temperature working conditions
Fuel Cells Sales In Global Market: By Product Type - Proton Exchange Membrane Fu …
Researchmoz added Most up-to-date research on "Fuel Cells Sales In Global Market: By Product Type - Proton Exchange Membrane Fuel Cells (PEMFC), Direct Methanol Fuel Cells (DMFC) & Solid Oxide Fuel Cells (SOFC)" to its huge collection of research reports. In this report, the global Fuel Cells market is valued at USD XX million in 2016 and is expected to reach USD XX million by the end of 2022, growing at