openPR Logo
Press release

Measurement Technology in Downstream Processing Market– Potential Growth Opportunities in Developing Economies

12-24-2018 01:09 PM CET | Health & Medicine

Press release from: Future Market Insights

Measurement Technology in Downstream Processing Market–

The global demand for advanced sensor technology has been on a steady rise over the last few years, owing to a growing need for biopharmaceuticals brought about by a rising prevalence of chronic diseases such as cancer, diabetes, and cardiovascular disease. Increased demand for biopharmaceuticals has necessitated the manufacturing of sensor products and this is likely to positively impact revenue growth of the global measurement technology in downstream processing market.

Future Market Insights presents a comprehensive forecast of the global market for measurement technology in downstream processing in a new report titled “Measurement Technology in Downstream Processing Market: Global Industry Analysis (2012 – 2016) & Opportunity Assessment (2017 – 2027).” Besides a historical market valuation for the period 2012 to 2016 and detailed revenue projections for the period 2017 to 2027, the report also provides useful information on the key market dynamics – growth drivers, revenue inhibitors, current and predicted market trends, as well as opportunities for manufacturers – with an objective to provide the report audience with pertinent qualitative and quantitative insights on the market.

Do Inquiry to Get the Sample of Report Here @ https://www.futuremarketinsights.com/reports/sample/rep-gb-5922

According to the forecast presented in the report, valuation of the global measurement technology in downstream processing market is anticipated to increase from an estimated US$ 3,772.4 Mn in 2017 to about US$ 6,827.9 Mn by the end of the forecast period in 2027. This reflects a CAGR of 6.1% in terms of value during the period of study.

Sensors Dominant Product Type in the Global Measurement Technology in Downstream Processing Market

The global measurement technology in downstream processing market is segmented on the basis of product type into Sensors, Transmitters and Controllers, Sensor Housings, Cables and Connectors, and Buffers and Standard Reagents. Sensors are the widely adopted product type with an increased market share throughout the forecast period. Conductivity sensors and cell density sensors are two of the fastest growing sensor types. In 2017, the market volume of the sensors segment was pegged at 4,165.4 (‘000 units) and this is expected to increase to 8,094.9 (‘000 units) by 2027 end.

Single Use to Remain the Most Preferred Modality in the Global Measurement Technology in Downstream Processing Market

On the basis of modality, the global market is segmented into Single Use and Reusable. The single use segment is the fastest growing modality type with a CAGR of 6.9%.

Biopharmaceutical Companies the Fastest Growing End Users of Measurement Technology in Downstream Processing

The global market for measurement technology in downstream processing is segmented based on end user into Biopharmaceutical Companies, Food & Beverage Companies, Contract Manufacturing Organisations, Contract Research Organisations, Academic and Research Institutes, and Others. Biopharmaceutical companies are the largest end users of measurement technology in downstream processing, and this segment is slated to register a CAGR of 7.2% during the forecast period – the highest among all the end user segments of the global market. Food & beverage companies are the second largest end users of measurement technology in downstream processing, and this segment is expected to reach a market valuation of US$ 2,273.2 Mn by 2027 end.

Western Europe Largest Regional Market for Measurement Technology in Downstream Processing

The report studies the performance of the global measurement technology in downstream processing market across the key geographies of North America, Latin America, Western Europe, Eastern Europe, Asia Pacific Excluding Japan, Japan, and Middle East & Africa. The Western Europe regional market is the largest in terms of revenue, with an estimated market valuation to the tune of US$ 2,677.1 Mn by the end of 2027. However, the Asia Pacific Excluding Japan measurement technology in downstream processing market is projected to witness the fastest growth rate of 8.3% between 2017 and 2027.

Methodology With Latest Advancements and Application @ https://www.futuremarketinsights.com/askus/rep-gb-5922

70% of the Global Measurement Technology in Downstream Processing Market Comprises Tier 3 Players

The report profiles some of the tier players operating in the global market such as Applikon Biotechnology, Inc., Broadley-James Corporation, Endress+Hauser AG, Thermo Fisher Scientific, Hamilton Company, Mettler-Toledo International, Inc., PendoTECH, PreSens Precision Sensing GmbH, and Sartorius AG. Just about 8% of the global market is represented by Tier 1 players.

Get More Insightful Information @ https://www.futuremarketinsights.com/reports/measurement-technology-in-downstream-processing-market

About Us

Future Market Insights is the premier provider of market intelligence and consulting services, serving clients in over 150 countries. FMI is headquartered in London, the global financial capital, and has delivery centers in the U.S. and India.

FMI’s research and consulting services help businesses around the globe navigate the challenges in a rapidly evolving marketplace with confidence and clarity. Our customized and syndicated market research reports deliver actionable insights that drive sustainable growth. We continuously track emerging trends and events in a broad range of end industries to ensure our clients prepare for the evolving needs of their consumers.

Contact Us

U.S. Office

616 Corporate Way, Suite 2-9018,

Valley Cottage, NY 10989,

United States

T: +1-347-918-3531

F: +1-845-579-5705

Email: sales@futuremarketinsights.com

Web: https://www.futuremarketinsights.com/

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Measurement Technology in Downstream Processing Market– Potential Growth Opportunities in Developing Economies here

News-ID: 1458394 • Views:

More Releases from Future Market Insights

Global Lithium Ion Battery Separator Market Projected to Reach US$ 3,256.7 Million by 2032
Global Lithium Ion Battery Separator Market Projected to Reach US$ 3,256.7 Milli …
The lithium-ion battery separator is a critical component in lithium-ion batteries, responsible for preventing short circuits and ensuring safe and efficient battery performance. It acts as a physical barrier between the positive and negative electrodes, allowing lithium ions to pass through while blocking the flow of electrons. With advancements in separator technology, these separators play a key role in enhancing battery capacity, cycle life, and overall safety in various applications,
Industrial Drums Market on a Trajectory to Reach US$ 17.6 Billion by 2027, Bolstered by a Robust 7.1% CAGR from 2022
Industrial Drums Market on a Trajectory to Reach US$ 17.6 Billion by 2027, Bolst …
The Industrial Drums Market is experiencing a steady and promising trajectory, with an estimated value of US$ 12.5 billion in 2022, projected to escalate to US$ 17.6 billion by 2027 at a commendable Compound Annual Growth Rate (CAGR) of 7.1%. This growth is substantiated by a 6.6% CAGR in volume during 2022-27, as per Future Market Insights. Anticipated to expand 1.5 times within this period, the market presents alluring prospects for industry
Supermarkets, Convenience Stores, and Eco-friendly Choices Fuel the Expansion of the Metal Cans Industry, Catering to Health-conscious and Environmentally-aware Consumers
Supermarkets, Convenience Stores, and Eco-friendly Choices Fuel the Expansion of …
The metal cans market is predicted to grow at a CAGR of 5% over the forecast period, according to research by Future Market Insights. The industry's estimated value is expected to increase from US$ 56 Bn in 2023 to US$ 91.1 Bn by 2033. The market for metal cans has been driven by the heightened demand for the product in food and beverages industry. Metal cans helps prolong shelf-life of perishable
Folding IBCs Market Poised for Growth: Expected to Reach US$ 528 Million by 2027 with a 4.8% CAGR
Folding IBCs Market Poised for Growth: Expected to Reach US$ 528 Million by 2027 …
The folding intermediate bulk containers (IBCs) market is on a growth trajectory, with an estimated value of US$ 418 million in 2022, projected to reach US$ 528 million by 2027, showcasing a Compound Annual Growth Rate (CAGR) of 4.8%. Remarkably, the China folding IBCs market defied initial pandemic-related skepticism and is anticipated to grow by 6.9% year on year in 2022. Despite global challenges, China's folding IBCs market is poised to contribute

All 5 Releases


More Releases for Measurement

Radon Measurement Instrument Market Forecast, 2021–2030 | by Mechanism, Measur …
Radon measurement instrument is also known as radon testers, radon detectors, and radon analyzers. The basic application of this instrument is to test presence of radon in the surrounding by collecting air samples for longer or shorter period as per requirement. These radon measurement instrument analyze radon level through active and passive detection method. Radon measurement instruments are used in industries, research laboratories, and houses & commercial spaces. Download Sample
Global Non-Contact Temperature Measurement Instrument Market By Type (Portable, …
The global non-contact temperature measurement instrument market was valued at US$ 728.3 Mn in 2018 and is expected to reach US$ 1,059.0 Mn in 2026, growing at a CAGR of 4.89% during the forecast period. Non-contact temperature measurement instruments measure temperature from a certain distance. Every matter with a temperature above absolute zero (0 K) emits infrared radiation relative to its temperature known as characteristic radiation. Whereas, the emissivity of a
Vacuum measurement technology – reconsidered
The exact observance of pressures or pressure curves in vacuum-assisted processes in process engineering is an important parameter for ensuring optimum efficiency and the best product quality. Busch Vacuum Pumps and Systems has now launched the new series of VacTest vacuum measurement equipment. Designed to combine the latest advances in vacuum metrology with exceptional manufacturing quality, it provides an innovative and comprehensive portfolio of active vacuum gauges and controllers. Robust
Body Fat Measurement Market Competitive Measurement 2025- GE Healthcare, AccuFit …
Global Body Fat Measurement Market: Snapshot Body fat measurement is swiftly becoming a highly sought-after medical diagnostics and lifestyle self-inspection. Body fat analyzers are a key tool in finding out any risks related to high fat percentages and allow users to plan their diet and exercise plans thereafter. They can be additionally helpful even after preliminary assessments for checking up on the effectiveness of a user’s exercise routine and consumption of
Inertial Measurement Unit Market - Gyroscope Inertial Measurement Unit to Grab H …
The global inertial measurement unit market is expected to be bolstered by the rising manufacture of aircrafts on a world platform triggering the rise of the need of better navigation techniques. The requirement of equipment with greater usage ease on account of the advancement of worldwide lifestyle enabled the engagement of motion sensing technology extensively using inertial sensors. This could play a critical part in defining the market and driving
Novel contactless flow measurement
NIVUS provide accurate flow measurement system using parallel level measurements launching NivuSmart Q The new measurement method has been developed in close cooperation with the University of Strasbourg. A hydraulic model perfectly adjusted to the specific conditions on the measurement site is the basis for accurate measurements. This model uses two level measurements in combination with the hydraulic model to determine the flow rate. Both levels are measured at a known