Humidity Transmitters with Stainless Steel Enclosure
Display with Data Logger Function
Analogue Outputs and Digital Interface
The measured data is available on two analogue outputs and on the optional digital interface (RS485 with Modbus RTU or Ethernet with Modbus TCP). An optional relay module can be used for alarms and process control.
Easy Installation and Service
The enclosure design facilitates installation and maintenance. The front cover, which accommodates the electronics and the probe, can be replaced within seconds, while the wiring inside the back cover remains intact.
Humidity and Temperature Measurement up to 180 °C
The EE310 measures relative humidity and temperature in the range -40 °C…180 °C ( 40...356 °F) and calculates further physical quantities such as dew point temperature, absolute humidity or mixing ratio. The transmitter is available for duct or wall mount, as well as with remote probes.
Reliable Oil Condition Monitoring
The EE360 measures water activity and temperature and calculates the absolute water content of transformer, lubrication and hydraulic oil, as well as of diesel fuel. The sensing probe can be employed up to 180 °C (356 °F) and 20 bar (290 psi). The ISO or NPT slide fitting and the optional ball valve facilitate the installation.
E+E Elektronik develops and manufactures sensors and transmitters for humidity, temperature, dewpoint, moisture in oil, air velocity, flow and CO2. Data loggers, hand-held measuring devices and calibration systems complete the comprehensive product portfolio of the Austrian sensor specialist. The main applications for E+E products lie in HVAC, building automation, industrial process control and the automotive industry. A certified quality management system according to ISO 9001 and IATF 16949 ensures the highest quality standards. E+E Elektronik has a worldwide dealership network and representative offices in Germany, France, Italy, Korea, China and the United States. The accredited E+E calibration laboratory (OEKD) has been commissioned by the Austrian Federal Office for Metrology (BEV) to provide the national standards for humidity and air velocity.
E+E Elektronik Ges.m.b.H
T: +43 (0) 7235 605-0
F: +43 (0) 7235 605-8
Mr. Johannes Fraundorfer
T: +43 (0)7235 605-217
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Humidity Transmitters with Stainless Steel Enclosure here
News-ID: 1435816 • Views: 319
More Releases from E+E Elektronik Ges.m.b.H.
New CO2 Sensor for Railway Applications
The EE8915 from E+E Elektronik meets all relevant railway standards for reliable CO2 measurement in railway vehicles, e.g. in the passenger compartment or driver's cab. On-board sensors ensure high CO2 measurement accuracy independently of temperature, altitude or weather conditions. Due to excellent measurement performance in harsh environment, the sensor is also suitable for demanding process and climate control. Long-Term Stable CO2 Measurement The E+E NDIR dual wavelength infrared measuring principle is particularly
Digital CO2, Humidity and Temperature Sensor
The EE850 duct mount sensor from E+E Elektronik combines the CO2, relative humidity (RH) and temperature (T) measurement in a single device. The sensor can be easily integrated into a bus system via the RS485 interface (Modbus RTU or BACnet MS/TP). The 3-in-1 device is dedicated for building automation as well as for demanding process control. The EE850 features the E+E dual wavelength NDIR CO2 sensing cell, which is particularly insensitive
Dew Point Measurement Module for High Humidity Applications
The EE1950 dew point measurement module from E+E Elektronik is dedicated for OEM applications with continuous high humidity and condensing conditions, such as climate and test chambers. Excellent temperature compensation ensures high accuracy over the entire working range from -70 °C to 180 °C (-94 °F to 356 °F). The device is also particularly resistant to pollutants and corrosive agents. Optimized for High-Humidity Conditions The EE1950 employs the innovative, heated E+E
Laminar Flow Sensor with Digital Output
The EE660 from E+E Elektronik measures accurately very low air velocity. It is ideal for laminar flow monitoring and clean room applications. The transmitter is now also available with an RS485 interface. The EE660 is suitable for accurate measurement of very low air velocity down to 0.15 m/s (30 ft/min). It features an E+E hot film sensing element, which offers excellent long-term stability and short response time. Furthermore, the sensing element
More Releases for EE310
Humidity Transmitters with Ethernet Interface
Beside the RS485 interface with Modbus RTU protocol, the EE310 humidity and temperature transmitter and the EE360 moisture in oil transmitter from E+E Elektronik now feature an Ethernet interface with Modbus TCP protocol. The EE310 and EE360 represent the latest generation of industrial transmitters from the Austrian sensor specialist E+E Elektronik. A multi-functional 3.5" TFT colour display provides a comprehensive overview of the measurement task and allows the user to
High-End Humidity and Temperature Transmitter with Multi-Functional Display
The highly accurate EE310 humidity and temperature transmitter from E+E Elektronik is dedicated for demanding process control. The modern multi-functional display with data logging function enables intuitive operation and offers an optimum overview of the measuring task. Extensive settings and diagnostics can thus be performed directly on the device. The EE310 measures relative humidity and temperature, and calculates dew point temperature, frost point temperature, wet-bulb temperature, water vapour partial pressure,