High-End Humidity and Temperature Transmitter with Multi-Functional Display
The EE310 measures relative humidity and temperature, and calculates dew point temperature, frost point temperature, wet-bulb temperature, water vapour partial pressure, mixing ratio, absolute humidity and specific enthalpy.
The 3.5” TFT colour display shows simultaneously up to four measured or calculated values. All settings and even error diagnosis are easily performed with push buttons. The integrated data logger stores up to 20,000 values per measurand. The recorded data can be shown on the display, or downloaded via the USB interface for further processing.
The EE310 transmitter is available for wall or duct mount, as well as with remote probe. Various remote probes can be employed up to 180 °C (356 °F) and 20 bar (290 psi). The probes are also available as pluggable versions for quick and easy replacement.
The E+E proprietary sensor coating brings relevant advantages when it comes to use in harsh industrial environment. It protects the sensing elements from corrosive and electrically conductive contamination, which leads to reliable and long-term stable measurements.
The modular enclosure simplifies installation and maintenance of the EE310. The upper part of the transmitter, which accommodates the electronics and the probe, can be easily plugged off for service or adjustment, while the wiring remains untouched.
The measured values are available on two analogue outputs and the Modbus RTU interface. Two freely configurable relay outputs can be used for control or alarm purposes. Configuration and adjustment of the transmitter can be performed via display or with the free EE-PCS software using the USB interface.
More information about the EE310: www.ee310-humidity-transmitter.com
E+E Elektronik develops and manufactures sensors and transmitters for humidity, temperature, dewpoint, moisture in oil, air velocity, flow and CO2. Data loggers, hand-held measuring devices and calibration systems complete the comprehensive product portfolio of the Austrian sensor specialist. The main applications for E+E products lie in HVAC, building automation, industrial process control and the automotive industry. A certified quality management system according to ISO 9001 and ISO/TS 16949 ensures the highest quality standards. E+E Elektronik has a worldwide dealership network and representative offices in Germany, France, Italy, Korea, China and the United States. The accredited E+E calibration laboratory (OEKD) has been commissioned by the Austrian Federal Office for Metrology (BEV) to provide the national standards for humidity and air velocity.
Mr. Johannes Fraundorfer
E+E Elektronik Ges.m.b.H
T: +43 (0) 7235 605-0
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release High-End Humidity and Temperature Transmitter with Multi-Functional Display here
News-ID: 446788 • Views: 563
More Releases from E+E Elektronik Ges.m.b.H.
Miniature Sensor Module Measures CO2, Temperature and Pressure
The new EE895 sensor module from E+E Elektronik measures CO2, temperature and ambient pressure. The small 3-in-1 module is an ideal choice for measuring instruments used for ventilation and climate control, in building automation or for process control. Due to its low power consumption, the module is also suitable for battery-operated devices such as hand-held meters, data loggers or wireless transmitters. The temperature and pressure compensation ensures high CO2 measurement
Humidity and Temperature Probe with Digital Interface
The EE072 by E+E Elektronik is a highly accurate humidity and temperature probe for demanding process and climate control tasks. The probe can be used for example in agriculture and livestock farming, the food and pharmaceutical industries or in clean rooms. The digital interface with the Modbus RTU or CANopen communication protocol facilitates the design-in of the EE072. Versatile in Use and Highly Accurate A wide temperature range of -40 to 80
4 in 1 Probe Measures CO2, Humidity, Temperature and Pressure
The EE872 from E+E Elektronik measures the CO2 concentration up to 5 % (50 000 ppm) as well as relative humidity, temperature and ambient pressure. Additionally, the 4 in 1 probe also calculates the dew point temperature. It is perfectly suited for use in harsh and aggressive environment, such as agricultural applications. The active pressure and temperature compensation ensures a very high CO2 measuring accuracy. A heated probe version is
New CO2 Sensor for Railway Applications
The EE8915 from E+E Elektronik meets all relevant railway standards for reliable CO2 measurement in railway vehicles, e.g. in the passenger compartment or driver's cab. On-board sensors ensure high CO2 measurement accuracy independently of temperature, altitude or weather conditions. Due to excellent measurement performance in harsh environment, the sensor is also suitable for demanding process and climate control. Long-Term Stable CO2 Measurement The E+E NDIR dual wavelength infrared measuring principle is particularly
More Releases for EE310
Humidity Transmitters with Stainless Steel Enclosure
The high-end EE310 and EE360 industrial transmitters from E+E Elektronik are now available with stainless steel or with polycarbonate enclosure. The EE310 humidity and temperature transmitter is dedicated for demanding industrial processes control. The EE360 measures the moisture content of industrial oils and thus enables predictive maintenance of machines and plants. Display with Data Logger Function Both devices feature an optional 3.5" TFT color display, which offers an optimal view
Humidity Transmitters with Ethernet Interface
Beside the RS485 interface with Modbus RTU protocol, the EE310 humidity and temperature transmitter and the EE360 moisture in oil transmitter from E+E Elektronik now feature an Ethernet interface with Modbus TCP protocol. The EE310 and EE360 represent the latest generation of industrial transmitters from the Austrian sensor specialist E+E Elektronik. A multi-functional 3.5" TFT colour display provides a comprehensive overview of the measurement task and allows the user to