openPR Logo
Press release

Aluminium Clad Printed Circuit Board Market Segmented By type Single layer aluminium clad printed circuit boards, Multi-layer aluminium clad printed circuit boards, Hybrid aluminium clad printed circuit boards, Flexible aluminium clad printed circuit boar

11-19-2018 12:18 PM CET | Business, Economy, Finances, Banking & Insurance

Press release from: Fact.MR

/ PR Agency: Fact.MR
Aluminium Clad Printed Circuit Board Market Segmented By type

Market Introduction:

An aluminium clad printed circuit board is a thermally-conductive printed circuit board that provides enhanced heat dissipation without demanding an external heat sink. This property widely impacts the performance of the circuit board as it reduces the thermal stress on the attached components. Aluminium clad printed circuit boards witness relatively high demand among all MCPCBs (Metal Clad Printed Circuit Boards), owing to their relatively low cost. They are also more durable and offer a reduced circuit board size, while increasing the power density.

Aluminium clad printed circuit boards are extensively used in the LED lights market due to their low cost. Heat dissipation has been a problem for consumer electronic and communication device manufacturers and hence, a shift towards aluminium clad printed circuit boards has been observed.

Get Experts' Insights For FREE:

Market Dynamics:

Copper, steel alloy and aluminium clad printed circuit boards are the most common metal clad printed circuit boards in the market. However, aluminium clad printed circuit boards, being relatively cheaper with better heat transfer, are emerging as the preferred choice among all MCPCBs. Copper MCPCBs allow even better heat dissipation but are expensive and thus, they are widely adopted in high power supply applications. On the other hand, steel alloy PCBs are comparatively rigid and offer lower thermal conductivity. Therefore, this will be one of the key differentiating factors that drives the aluminium clad printed circuit board market. Further, rising automation in several end-use industries is anticipated to drive the growth of the aluminium clad printed circuit board market. Increasing demand for wireless devices and constant innovation to reduce the size of consumer electronics are also among the key factors driving the aluminium clad printed circuit board market.

Wearable electronic devices are trending at present and these devices require flexible aluminium clad printed circuit boards. Attributing to such new applications, the size of PCBs, especially aluminium clad printed circuit boards, has reduced to well over 60%. Aluminium clad printed circuit boards are also suitable alternatives to fragile ceramic substrates as they offer enhanced mechanical durability.

From a regional perspective, the Asia Pacific aluminium clad printed circuit board market is anticipated to witness substantial growth, owing to the presence of numerous semiconductor manufacturers in this region. The growth of the aluminium clad printed circuit board market in APAC can also be attributed to the rising adoption of smart devices in this region. The growing internet consumer base in countries such as India will play a vital role in the growth of aluminium clad printed circuit board market in these countries and the general consumer electronics segment will be one of the dominant end user segments in the whole of APAC. The North America aluminium clad printed circuit board market is expected to follow APAC, owing to the high demand from the military & aerospace sector. The Europe aluminium clad printed circuit board market seems to be a mature market but might show appreciable growth throughout the forecast period.

Access Research Methodology Prepared By Experts:

Market Participants

Examples of some of the market participants in the global aluminium clad printed circuit board market identified across the value chain include Amitron Corp., Newbury Electronics, Epec, LLC, Millennium Circuits Limited, Innoquick Electronics Limited, DK Thermal Metal Circuit Technology Ltd., Baknor, Henkel Electronics Materials, LLC, Metro Electronics, Candor Circuit Boards, Diya Electronics, Softcad Technologies Ltd and Andwin Circuits Co. Ltd.

This analytical research study imparts an all-inclusive assessment on the market, while propounding historical intelligence, actionable insights, and industry-validated & statistically-upheld market forecast. Verified and suitable set of assumptions and methodology has been leveraged for developing this comprehensive study. Information and analysis on key market segments incorporated in the report has been delivered in weighted chapters. A thorough analysis has been offered by the report on

Report Analyst @

Compilation of authentic and first-hand intelligence, insights offered in the report are based on quantitative and qualitative assessment by leading industry experts, and inputs from opinion leaders & industry participants around the value chain. Growth determinants, macroeconomic indicators, and parent market trends have been scrutinized and delivered, coupled with the market attractiveness for each market segment encompassed. Qualitative impact of growth influencers on the market segments across regions has also been mapped by the report.

About FactMR
FactMR is a fast-growing market research firm that offers the most comprehensive suite of syndicated and customized market research reports. We believe transformative intelligence can educate and inspire businesses to make smarter decisions. We know the limitations of the one-size-fits-all approach; that's why we publish multi-industry global, regional, and country-specific research reports.

Contact Us
11140 Rockville Pike
Suite 400
Rockville, MD 20852
United States
Follow Us on Linkedin:

This release was published on openPR.

Permanent link to this press release:

Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Aluminium Clad Printed Circuit Board Market Segmented By type Single layer aluminium clad printed circuit boards, Multi-layer aluminium clad printed circuit boards, Hybrid aluminium clad printed circuit boards, Flexible aluminium clad printed circuit boar here

News-ID: 1381489 • Views: 125

More Releases from Fact.MR

Mini LED Market to Expand 7.5X by 2030, Finds New Study by Fact.MR
In recent years, increasing popularity of OLED TVs in China and India has been significantly influencing growth of the mini LED market. With an increase in disposable income of a majority of the population in these countries, the inclination towards smart screens with higher lifespan and better performance is expected to open up numerous growth opportunities for the mini LED market. Moreover, aspiring and affluent households have increased their spending
Uncertainty Surrounding COVID-19 to Shave-off Growth in Electrical Steel Market …
The global electrical steel market has utilized the opportunities in the market over the last decade with sales of electrical steel pegged at US$ 20.4 Bn in 2019. However, sales are set to plummet during in the middle two quarters of 2020 owing to COVID-19. In addition, several automakers have shuttered their production units, causing incalculable loss to the electrical steel market in 2020. However, the demand of electrical steel
07-02-2020 | Health & Medicine
Medical Device Contract Manufacturing Market Set for Strong Growth, Production F …
The medical device contract manufacturing market is poised to expand at a CAGR of 11.3% during the forecast period (2020-2026). This is attributed to rapidly evolving healthcare industry and increasing adoption of technologically advanced surgical procedures. A number of original equipment manufacturers (OEMs) and contract manufacturers have been focusing on advanced technologies such as robotics, 3D-printing, and minimally invasive surgeries. Mergers & acquisition activities among leading players have greatly accelerated
06-02-2020 | Health & Medicine
Fluid Management Market Expected to Grow Amid Covid-19, Finds Fact.MR
Growing prevalence of chronic disease and an expansion in numbers of geriatric population is leading to an upward facing growth curve for global fluid management market over the period of 2020 to 2025, states Fact.MR. It projects a compound annual growth rate or CAGR of about 5.3% for the market over this period, helping the market push its worth up significantly. It is significant to note here that while number of

All 5 Releases

More Releases for Circuit

Power Management Integrated Circuit Market -
The power management integrated circuit market, published by Transparency Market Research, the global PMIC market is expected to reach US$ 56.48 Bn by 2026, expanding at a CAGR of 4.6% from 2018 to 2026. According to the report, the global market will continue to be influenced by a range of macroeconomic and industry-specific factors. Obtain Brochure For Latest Technology Advancements @ High smartphone penetration in the last few years has made
Circuit Protection Market Consequential share 2025
Global Circuit Protection Market: Snapshot With the robust growth of the global automotive electronics market, the global circuit protection market is poised to rake in a significant share of the revenue pie. Most of the modern automobiles are embedded with electronic systems such as transmission electronics, engine electronics, chassis electronics, driver assistance and safety electronics, and infotainment systems. To protect these sensitive electronic components of automobiles, circuit protection systems are
Global Integrated Circuit Market, 2025
IndexBox has just published a new report "World: Electronic Integrated Circuits And Microassemblies - Market Report. Analysis and Forecast to 2025" ( ). This report is best suitable for you if you: • Are planning to enter a new geographical market and wish to know which one is best for your product • Are planning to enter a new product market and want to have a detailed overview of the market before
Circuit Protection Devices by GD Rectifiers
Circuit protection devices prevent damage and excessive temperature, current and short circuits. Circuit protection devices limit the amount of energy that is released in the event of electrical failure. GD Rectifiers circuit protection products include different types of circuit protection devices, fuses, circuit breakers, surge protection devices and motor protection devices to prevent overvoltage, overcurrent and overtemperature. Fuses & Microswitches GD Rectifiers boosts a wide range of fuses from Cooper Bussmann, now known
From September 13th to October 6th the international music network sets up the ninth CIRCUIT of 2013. The following artists will be part of the tour across north-western Europe: STRESSECHOES (Cheltenham, UK) Stressechoes are a four-piece acoustic act from Cheltenham in the southwest of England. Founded in 2008 when introduced by mutual friends, singer-songwriters Alex Petrie and Andrew Corey realised both a mutual love of similar music and an ability to gel together
From April 13th to May 6th the international music network sets up the fourth CIRCUIT of 2012. The followung artists will be part of the tour across north-western Eutope: A Jigsaw (Coimbra, PO) A Jigsaw is Portuguese Indie-Folk band consisting of the three multi-instrumentalists musicians Joao Rui, Susana Ribeiro and Jorri. The band is named after the Belgium band dEUS song “Jigsaw You”. In 2007 they released a concept album called Letters From The