openPR Logo
Press release

EtherNet/IP Multi-turn Resolver Compatible with Allen Bradley PLCs

06-24-2010 10:09 AM CET | Industry, Real Estate & Construction

Press release from: AMCI

AMCI NR25 Series EtherNet/IP Resolvers

AMCI NR25 Series EtherNet/IP Resolvers

Terryville, CT – Advanced Micro Controls Inc. (AMCI), has released the NR25 series of heavy-duty EtherNet/IP resolvers. Compatible with all Allen-Bradley PLCs that support EtherNet/IP, these networked rotary sensors provide an overall measuring range of 16 bits (single-turn resolution) plus 14 bits (number of revolutions), or 30 bits total. With both single-turn and multi-turn versions available, AMCI’s EtherNet/IP resolvers are ready for any application. Designed in accordance with ODVA guidelines, the AMCI EtherNet/IP resolvers have been accepted into the Rockwell Automation Encompass™ Program as a referenced product.

NR25 EtherNet/IP Resolver Features:
• Up to 30 bit (65536 steps x 16384 revolutions) Resolution
• Absolute Single-turn and Multi-turn
• Power over EtherNet (PoE)
• IP67 Ingress Protection Rating
• Solid Shaft and Hub Shaft Versions
• Stainless Steel Units Available
• Accepted into Rockwell Automation Encompass Program
• ODVA Compliant

Simplify Installation and Cut Costs
AMCI’s NR25 EtherNet/IP resolver comes standard with Power over Ethernet (PoE), making it possible to install this resolver using a single Ethernet cable that transmits data and power. The connector and cabling requirements are cut in half, plus installation is simpler and less expensive. Additionally, the ability to program with implicit and explicit messaging allows the NR25 series resolvers to easily integrate with Allen-Bradley PLCs and PACs supporting EtherNet/IP. Position resolution, counting direction, velocity format, and presets are all configured easily through the EtherNet/IP port using RSLogix programming software. And the ability to configure parameters simultaneously makes the NR25 resolver quick and easy to set up.

LEDs on the NR25 EtherNet/IP resolvers help technicians troubleshoot from the factory floor by displaying diagnostic information including module status, network status, and link/activity status.

The Package
The ODVA compliant NR25 EtherNet/IP resolvers are offered in a 2.5” diameter package with two M12 connectors on the back, supplying power and EtherNet/IP connectivity. The NR25 is resolver based, meaning that it was designed to provide absolute position feedback without glass discs or sensitive LED components, enabling it to withstand high levels of shock and vibration. The IP67 rated package is the solution for single-turn and multi-turn position applications requiring protection from dust and water ingress. Stainless steel versions are also available for food grade and marine environments.

For more information on the AMCI NR25 Series EtherNet/IP resolvers, visit our website>> http://bit.ly/cbTehD

About Advanced Micro Controls Inc.
Founded in 1985, Advanced Micro Controls Inc (AMCI) is a leading U.S. based manufacturer with a global presence. Our industrial controls improve the performance and profitability of today's factory and automation systems. AMCI specializes in the design, manufacturing, and sales of eight different product families. Long standing relationships with the biggest names in industrial automation enable our team to deliver innovative, competitive products that are designed for years of reliable performance.

Media Contact: Bob Alesio
Telephone: (860) 585-1254 ext.128
Email: balesio@amci.com

Advanced Micro Controls Inc.
20 Gear Drive
Plymouth Industrial Park
Terryville , CT 06786 USA
Telephone: (860)-585-1254
Facsimile: (860) 584-1973
http://www.amci.com
###

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release EtherNet/IP Multi-turn Resolver Compatible with Allen Bradley PLCs here

News-ID: 136257 • Views: 1440

More Releases from AMCI

AMCI Integrated Steppers for COVID-19 Vaccine Vial Machines
Terryville, CT - Advanced Micro Controls Inc. (AMCI), an established manufacturer of motion control solutions, and R&D Custom Automation (R&D), builder of custom automation machinery for the pharmaceutical industry, are teaming up to help fight the COVID-19 virus. Under the Defense Production Act of 2020, AMCI & R&D are working closely to develop and manufacture essential automation machinery vital to the COVID-19 vaccine clinical trials and production, with the expectation
Networked Rotary Encoders Boast New Features
Advanced Micro Controls Inc. (AMCI), adds new features to their NR60E2 series of networked absolute rotary encoders. The new features include a Profinet interface, E2 Technology, Hub Shaft (Blind Shaft) Option, and Stainless Steel units. These rotary sensors provide an overall measuring range of 16 bits (single-turn resolution) plus 14 bits (number of revolutions), for 30 bits total. The AMCI NR60E2 networked encoders are 100% compatible with Allen-Bradley, Siemens, and
Integrated Servo Cut Costs & Save Space
Terryville, CT - November 8, 2019 – Advanced Micro Controls Inc. (AMCI) releases the SV160E2 Integrated Servo Motor, expanding their line of motion controllers beyond stepper technology. The SV160E2 incorporates a servo motor, drive, and controller in a single unit. AMCI’s SV160E2 Integrated Servo Motor offers many sophisticated features and the compact design eliminates the need to purchase a multiple components because they are all built-in. AMCI’s SV160E2 Integrated Servo
AMCI Receives 2019 Control Design Readers’ Choice Award
Terryville, CT – Advanced Micro Controls Inc. (AMCI) has been recognized in the Control Design 2019 Readers’ Choice Awards. Industry trends and innovations have crept into the rankings, and AMCI’s integrated stepper motors have been ranked among the best of the best thanks to the readers of Control Design who have chosen AMCI as a preferred Stepper Motor supplier in the Motion category. AMCI’s SMD Series integrated motors combine a high

All 5 Releases


More Releases for EtherNet

Humidity Transmitters with Ethernet Interface
Beside the RS485 interface with Modbus RTU protocol, the EE310 humidity and temperature transmitter and the EE360 moisture in oil transmitter from E+E Elektronik now feature an Ethernet interface with Modbus TCP protocol. The EE310 and EE360 represent the latest generation of industrial transmitters from the Austrian sensor specialist E+E Elektronik. A multi-functional 3.5" TFT colour display provides a comprehensive overview of the measurement task and allows the user to
IOP Tester for Ethernet ECUs
RUETZ SYSTEM SOLUTIONS Tests ECUs for Interoperability RUETZ SYSTEM SOLUTIONS – experts for automotive data communications - provides an interoperability test platform for Automotive Ethernet. This IOP tester operates within the framework of compliance tests for Automotive Ethernet. The test platform constitutes a component of the test set-up for Open Alliance Layer 1 interoperability tests for ECUs. The IOP tester allows the verification of ECUs for interoperability with other ECUs
Perle Launches Industrial Ethernet Switches
Perle Systems, a global manufacturer of advanced Ethernet over Fiber and secure device networking solutions, announces its entry into the Industrial Ethernet Switch marketplace. Industrial-grade Ethernet Switches are specially designed to stand up to the extreme temperatures, vibrations, and shocks found in industrial automation, government, military, marine, rail, oil and gas, mining and outdoor applications. By launching over 200 models, Perle now clams the title of having the broadest range
Perle launches Ethernet Copper Extenders
NASHVILLE, TN—November 29th, 2012—Perle Systems, a global provider of advanced Ethernet over fiber and secure device networking solutions, today introduces Ethernet Copper Extenders. Perle Ethernet Extenders are designed for environments where network services are needed beyond the Ethernet limit of 328 feet (100 meters). With network demands often outpacing the original design, Network Administrators are frequently faced with their infrastructure operating at the brink of its capabilities. Copper-based Ethernet connections are
New Industrial Ethernet-Connectors from ESCHA
Halver, 26 March 2012 – The Halver/Germany based Connectivity- and Housing manufacturer ESCHA has extended its connectivity line for Industrial-Ethernet-Applications by several products that guarantee a fast and safe data transmission up to 10 Gbit/s. The new M12x1 round connectors with X-Coding as well as the new RJ45-Connectors are respectively available as field wireable- or overmolded variants. Moreover, the connectivity specialist is also introducing a device connection and
Integrated Stepper Indexer/Drive with Ethernet Interface
Terryville, CT – Advanced Micro Controls Inc. (AMCI), releases their highly anticipated stepper motor indexer/drive package with network communication. AMCI’s new ANG1(E) integrates drive and motion control technology in one package, simplifying installation and cutting costs. The drive/controller communicates with the host PLC over the EtherNet/IP or Modbus-TCP network. Move commands are easily programmed through the host PLC’s software, and cabling is drastically reduced by expanding up to