Automotive Injector Nozzle Market to Experience Significant Growth during the Forecast Period 2017-2022 | Top Market Particiapants- Camcraft, Haynes Corporation, Alternative Fuel Systems Inc., Infineon Technologies AG, Magneti Marelli S.p.A., Keihin Corpo

Automotive injector nozzle is all set to witness an affluent adoption rate with the proliferation of passenger and commercial vehicles with diesel and gasoline operated engines. Moreover, escalating preferences for fuel efficient engine technologies are also likely to push use of automotive injector nozzle by a remarkable margin. Fact MR has published a holistic research study on ‘Automotive Injector Nozzle Market’ for the forecast timespan of 2017 to 2022. The report reckons that the automotive injector nozzle market is likely to touch a valuation of around US$ 5.7 Bn by 2022 end.

Request For Free Sample Report @ https://www.factmr.com/connectus/sample?flag=S&rep_id=38

In a bid to maximize optimum utilization of fuels, the concept of multi-point fuel injection using automotive injector nozzles stands out as a widely acknowledged method. This concept is gaining grounds as it ensures electronically metered injection of fuel and is likely to influence the dynamics of automotive injector nozzle market. This concept has been fine-tuned by incorporating an electronic monitoring system, which aids in rationalizing the fuel injection timing into the combustion chamber. Such deliberate additions by the manufacturers are projected to bode well for the expansion of automotive injector nozzle market.

OEMs in the automotive injector nozzle market are closely scrutinizing performance of injector nozzles by consistent experiments with various shapes. New designs and injector orifices are being formulated by manufacturers in the automotive injector nozzle market to amplify emission characteristics of diesel engines. However, incompetency of injector nozzles to serve beyond combustible engines is likely to limit expansion of automotive injector nozzle market. With the advent of next-generation vehicles, refurbished products such as piezoelectric diesel injector nozzles are projected to witness steadfast adoption in the automotive injector nozzle market.

The automotive injector nozzle market is segmented into gasoline and diesel fuel engines. By the end of 2022, more than US$ 3.5 Bn worth of automotive injector nozzles is expected to be sold for use in gasoline engines. This clearly implies that OEMs in the automotive injector nozzle market will be extensively focusing on synthesizing injector nozzles for gasoline fuel engines.

Design developments in injectors and injector nozzles are aimed at optimizing the breaking up process which in turn determines efficiency of ignition and combustion process. Despite the introduction of multiple innovation in this regard, the fuel injection engineering community remains bemused in fathoming complete breakup process, in particular primary breakup mechanism. Recently, computer fluid dynamics (CFD) simulation has been used to understand the mechanism of primary breakup and importance of nozzle geometry on spray structure. Manufacturers in the automotive injector nozzle market have started incorporating simulation process during in development of injector nozzle design for new high-performing engines with enhanced fuel economy and lower emission.

Piezoelectric Injector Nozzles Remain a Preferred Choice for Diesel Fuel Engines

The prime difference between piezo injectors and other diesel injectors is the presence of piezo material that enables delivery of high speed and precision fuel injection. Leading injector manufacturers have harnessed the piezo technology in their diesel fuel injector nozzle. While the technology is applied for both gasoline and diesel engines, in consistently changing parameters of diesel engine, piezo technology is highly utilized. As the technology is well-proven for its efficiency, manufacturers in the automotive injector nozzle market are actively engaged in delivering piezoelectric diesel injector nozzle for different country-specific fuel qualities and with compatibility at all pressure levels.

View Full Report with TOC @ https://www.factmr.com/report/38/automotive-injector-nozzle-market

Gasoline Direct Injection (GDI) Adoption to Increase Significantly amid Pre-eminence of Gasoline Port Fuel Injection (PFI)

Port fuel injector design has been traditionally and widely used in the internal combustion engines, however, PFI lacks efficiency in delivering fuel economy as compared to gasoline direct injection. Supremacy of GDI technology lies in better engine performance with high injection pressure and accurate fuel delivery. Although port fuel injection technology dominated the automotive injector nozzle market with almost 50% of total market share in 2017, gasoline direct injection technology is estimated to gain over 66 BPS and account for over 6.5% CAGR through 2022.

Design Developments in Injector Nozzle Configurations to Achieve Optimum Emission Standards

Emission standards continue to determine the development of the automotive industry, particularly the internal combustion engine. Automotive injector nozzles play a vital role in determining the performance and efficiency of internal combustion engines. All the innovations that are introduced or are under process of R&D are aimed at complying with the strict emission standards for fuel efficiency and reduction of exhaust gases and particulates.  Manufacturers across the global automotive industry are adopting novel designs, injector orifices and injector nozzle designs to complement with the stricter emission standards and improve the overall engine efficiency.

Emergence of Alternative Fuel Vehicles to Challenge the Automotive Injector Nozzle Market

Automotive manufacturers’ interest in alternative fuel vehicles is increasing rapidly against the backdrop of growing emphasis on reducing emission levels and sustainable solutions. The market for electric vehicles (EVs) is gaining ground while consistently introducing electric variants of prominent vehicle types. As consumers are becoming more conversant with the issues of global warming and role of automobiles in vitiating the environment, EV demand has seen a significant spike in past half a decade. While automotive injector nozzle is an integral part of internal combustion engines, declining reliance on conventional fuels and emergence of alternative fuel vehicles is expected to confine the progress of the automotive injector nozzle market in the coming years.

Competitive Landscape

The competitive landscape section in the automotive injector nozzle market report delivers an exhaustive list of key market players that are categorized in manufacturers, suppliers and distributors. A comprehensive overview of the product offerings, recent innovation R&Ds in pipeline and notable business strategies are discussed in individual company profile. Key companies profiled in the automotive injector nozzle market include Camcraft Inc., Haynes Corporation, Alternative Fuel Systems Inc., Infineon Technologies AG, Magneti Marelli S.p.A., Keihin Corporation, Eaton Corporation PLC, Robert Bosch GmbH, Denso Corporation, Delphi Automotive PLC, and Continental AG among others.

Manufacturers continue to incorporate technology innovations to deliver improved automotive injector nozzles with greater fuel efficiency and low emissions. For example, Delphi Automotive Systems have incorporated ANSYS computational fluid dynamics (CFD) software to develop the fuel injector nozzle geometry that deliver optimum engine performance.

The Fact.MR study on Automotive Injector Nozzle Market is available for direct purchase. Buy now @ https://www.factmr.com/checkout/38/S

Table of Content:

Chapter 1 Global Injector Nozzle Market - Executive Summary 21

Chapter 2 Global Injector Nozzle Market Overview 23
2.1 Introduction 23
      2.1.1 Global Injector Nozzle Market Taxonomy 23
      2.1.2 Global Injector Nozzle Market Definition 23
2.2 Global Injector Nozzle Market Size (US$ Mn) and Forecast, 2012-2022 23
      2.2.1 Global Injector Nozzle Market Y-o-Y Growth 23
2.3 Global Automotive Filter Market: Macroeconomic Factors 24
      2.3.1 Economic Outlook 24
      2.3.2 International Policy 24
      2.3.3 Profitability of Enterprises 25
      2.3.4 Increasing Purchasing Power of Middle Class 25
      2.3.5 Complex Eco System 25
      2.3.6 Supply chain Issues 25
      2.3.7 End-user Sentiment 25
2.4 Global Automotive Filter Market impact factors 26
      2.4.1 Autonomous Vehicles 26
      2.4.2 The Influence of China 26
      2.4.3 Dilemma on Shift to New Technologies 26
      2.4.4 Disruption in Traditional Business Models 27
      2.4.5 Rising Component Costs in Developing Countries 27
      2.4.6 Fluctuating Input costs 27

Continued……………..

About FactMR
FactMR is a fast-growing market research firm that offers the most comprehensive suite of syndicated and customized market Insights reports. We believe transformative intelligence can educate and inspire businesses to make smarter decisions. We know the limitations of the one-size-fits-all approach; that's why we publish multi-industry global, regional, and country-specific research reports.

Contact Us
FactMR
11140 Rockville Pike
Suite 400
Rockville, MD 20852
United States
Email: sales@factmr.com
Web: https://www.factmr.com/
Follow Us on Linkedin: https://www.linkedin.com/company/factmr/

This release was published on openPR.