Press release
Prevent quality issues by zooming in on printed circuit boards
When inspecting bare solder boards, connectors or other components, digital microscopes allows the operator to zoom in on the product to either proof quality or to detect mistakes and defects and thereby change the production setup, preventing errors to continue.
By adding digital documentation possibilities, the user is also able to provide sufficient documentation material to customers and own documentation process. Furthermore, adding measurement and verification apps to the digital microscope enables the operator to further improve and ensure quality by measuring and validating the product.
Inspection of PCB prototypes
Quality Assurance using a digital microscope could also be used by R&D engineers who need to inspect a prototype of a board manually, since there is currently no procedure to inspect it automatically.
This process is also called First Article Inspection (FAI) and is crucial to prevent quality issues later on when the product hits production and thereby the damage is far less comprehensive.
Digital microscopes from Scandinavian TAGARNO
TAGARNOs digital microscopes creates high factory utilization rates, since the digital camera microscopes are used frequently and are often shared among multiple departments.
A digital microscope also allows you to capture digital images, creating quick image viewing, capturing and sharing capabilities, creating better communications and enhancing cooperation between employees and across the entire organization.
About TAGARNO
TAGARNOs digital microscopes are used for automated quality control and digital documentation of flour samples. Using high-definition cameras and user-friendly software interfaces, the digital microscopes magnify and analyze flour samples in excellent image quality.
Questions?
Contact TAGARNO Marketing Manager Sabina Svane ss@tagarno.com
+45 76251117
INS is your trusted communications agency for B2B and trade media marketing.
Media Department
Industrial News Service-INS OYAb
Iso Roobertinkatu 20-22
FI-00120 Helsinki
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Prevent quality issues by zooming in on printed circuit boards here
News-ID: 1346108 • Views: …
More Releases from Industrial News Service – INS Oy/Ab
Steerprop strengthens its organization in Asia
Steerprop has strengthened its presence in China and Southeast Asia by appointing two seasoned propulsion and vessel engineering experts, Ayhwa Ngoh as Regional Sales Manager in Singapore and Robbie Wang as General Manager, Sales in China.
Robbie Wang has graduated from Wuhan University of Technology, majoring in Marine Power system, and he started in the marine business as a design engineer at Jiangnan Shipbuilding Co Ltd.
“I joined Rolls-Royce Marine China in…
New Alfa Laval PlusClean cleaning nozzle revolutionizes tank cleaning with 100% …
With the introduction of the new Alfa Laval PlusClean® cleaning nozzle, Alfa Laval’s broad tank cleaning portfolio is set to take a giant leap forward. The PlusClean delivers unprecedented 100% tank cleaning coverage, up to 80% savings in water and cleaning media costs, and no product contamination. Paired with a top-mounted tank cleaning device and installed flush with the tank wall or bottom, the PlusClean raises productivity and lowers total…
Eco-friendly splints developed for hospitals make their debut in sports
Woodcast is a lightweight biodegradable material made from wood and biopolymers, originally developed to replace the plaster casts traditionally used in hospitals. The material, invented by the Finnish high-tech company Onbone, proved to be so versatile that it is now used in a wide array of usage areas, one of them being sports.
Injuries of varying degrees happen all the time in sports. Many of them can be treated on site…
Cost-Effective, Reliable Performance is Easily Achieved with Alfa Laval’s New …
/ins Alfa Laval OptiLobe rotary lobe pumps are cost-effective, reliable and versatile alternatives for general applications requiring gentle product treatment and easy serviceability.
To meet the requirements of lower flow rates and higher production capacities, the addition of the Alfa Laval OptiLobe 10 and OptiLobe 50 adds 4 new pump sizes to the product range. These new pumps will also provide the possibility of having heating/cooling front covers for processes,…
More Releases for TAGARNO
Digital Microscope Market Forecasts (2020-2026) Segmentation By Top Manufacturer …
The global Digital MicroscopeMarket is projected to grow with a striking growth rate of 2.74 % over the forecast period 2020-2026, divulges the latest research report presented by Big Market Research. The report represents a basic overview of the market status, competitor segment with a basic introduction of key vendors, top regions, product types and end industries. This report gives a historical overview of the market trends, growth, revenue, capacity,…
Avoid blurred image documentation during quality control with Focus Stacking app …
One main advantage of using a digital microscope during quality control is how easily operators can create photo documentation of their work. However, issues arise when the object is not flat, resulting in blurred or out of focus areas on the image. Solution? Stacking photos with varying focus heights on top of each other for one ultra-sharp image.
The cameras used in digital microscopes today are of such high quality that…
Digital Microscopes Market Forecast till 2026: Olympus Corporation, Nikon Corpor …
A research team at University of Houston, U.S., developed a multicolor fluorescence microscope from a smartphone and a 3-D printer in December 2017. Moreover, researchers at the University of Waterloo in Ontario, developed a low-cost and lens free field-microscope in June 2017, by incorporating artificial intelligence and mathematics models of light to develop 3-D images. Grundium OY — Finland-based manufacturer of multi-camera technology — received an investment of US$ 2.3…
Improve quality control with apps for your digital microscope
Finding the right equipment for quality control can be time consuming. That’s why it is important to find long lasting and agile equipment. One solution is a digital microscope with quality control improving apps that allows the operator to alter the system to meet future requirements without investing in new equipment.
With a digital microscope from TAGARNO, the user can purchase apps specifically developed to improve quality control processes…
Inspect large PCBs in ergonomically correct working positions
TAGARNO is now announcing a modified digital microscope solution, promoting ergonomically correct working conditions and new possibilities to inspect large PCBs with plenty of work space beneath the camera.
By incorporating a new lens and flex arm, compatible with the TAGARNO FHD ZAP digital microscope solution, the user is now able to be positioned directly in front of the camera, in an optimal working posture due to the placement of…
Automatically count speck and bran in any type of flour
A new way of counting speck and bran in flour samples is paving the way for more efficient and accurate milling processes
There is now a new, accurate and digital way to count the number of speck and bran in flour samples as an alternative to the strenuous manually estimation of the quality levels. The aim is to ensure high quality in the flour production and guarantee efficiency and…
