Press release
Actual changes to Ethernet-based field buses in the German machinery industry
48% of the change-willing machine-builders want to introduce ProfiNet, (Siemens) and 22% EtherCat (Beckhoff) at the machines this year. These changes take particularly place at expense of the classical, non Ethernet-based field buses such as Profibus (Siemens) or CAN.
Regarding Powerlink (B&R), Sercos III, DeviceNet and in-house solutions of the machine-builders a differentiated picture shows up.
The readiness of the machine-builders to make changes at the automation technology of the machines is high this year. 70% of the machine-builders aim for such changes compared with 72% last year.
Field buses are on the centre of the change-ready machine-builders’ interest. Almost each second of these machine-builders (43%) will change the field buses at the machines in the suggested manner.
The Quest Trend Magazine Online publishes these actual change trends on http://www.quest-trendmagazin.de/Trend-to-Ethernet-based-field.104.0.html?&L=1
So the Quest Trend Magazine makes the machine-builders’ decisions easier. Now the machine-builders can compare their intended changes with the trends in their own sector confirming or adjusting their intentions.
The suppliers of automation technology are learning beyond their constituency, which changes in field buses the machinery industry as a whole is aiming for this year. This enables the suppliers to meet the demand trends in time and purposefully.
The trends from the users’ point of view are based on market surveys of Quest TechnoMarketing, Bochum, London, with the title “What the machine-builders want to change in the automation technology 2010”. This survey was carried out in January/February and covered scarcely 250 representative machine-builders. Highlight, table of contents and budget of the study are on http://www.qtm.de/e/index_marketstudies_free.html
Quest TechnoMarketing is specialised in market surveys regarding the automation technology for more than 20 years and is the publisher of the Quest Trend Magazine.
About the Quest Trend Magazine:
The print edition of the Quest Trend Magazine is published since 2001 and is dispatched to 3.200 personally addressed to the decision-makers in the automation technology in the machinery industry of Germany, Austria and Switzerland and in the automotive and F&B industries. It has at least 10,000 readers according to the reader questioning and enjoys a high degree of attention due to its focus on trends in the automation technology from users’ point of view.
The Quest Trend Magazine is published by Quest TechnoMarketing.
About Quest TechnoMarketing:
Quest TechnoMarketing e.K., founded 1989, is specialised in market surveys for the automation technology. Location is Bochum and as Quest TechnoMarketing Ltd. London. At Bochum a team of 6 specialists are employed.
The market studies of Quest TechnoMarketing cover very detailed the demand trends in control technology, drive technology, field buses, Ethernet and sensor technology in the machinery industry and in the automotive and F&B industries.
These demand trends are based on interviews with the decision-makers. The trends are professionally, representatively and manufacturer-independently recorded.
The customers of Quest TechnoMarketing are the manufacturers of automation technology. The majority of the well-known manufacturers belong to them. The customers use the market studies for their product development and market processing.
Presscontact:
Thomas Quest
Quest Trend Magazine
Hunscheidtstr. 87
44789 Bochum, Germany
Telefon +49 234-34777
Fax +49 234-33 22 02
E-Mail: presse@quest-trendmagazin.de
Internet: www.quest-trendmagazin.de
Quest TechnoMarketing e.K.
Hunscheidtstr. 87
44789 Bochum, Germany
Phone +49 234-34777
Fax +49 234- 33 22 02
E-Mail: info@qtm.de
Internet: www.qtm.de
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Actual changes to Ethernet-based field buses in the German machinery industry here
News-ID: 128924 • Views: …
More Releases from Quest Trend Magazin
Rising world market shares of the 10 largest automakers
From 2011 to 2012 the worldwide motor vehicle production rose by 5.2%. That was connected with a noticeable change of the world market shares among the 10 largest automakers. Three changes are crucial.
Quest TechnoMarketing has investigated the internationalization of the worldwide automobile production since 2000 and published some results in the Quest Trend Magazine.
Now this long-term trend analysis has been amended by the actual changes from 2011 to 2012…
The German machinery industry is divided into three groups - new in the Quest Tr …
Compared with large industries such as chemistry or motor vehicle industry the machinery industry is rightly considered as medium-sized. However, it is divided into three groups that shift the medium-size character in the background.
Quest TechnoMarketing investigated the industry structure of the German machinery industry and published the result in the Quest Trend Magazine. In particular for the manufacturers of automation technology it may be useful to adjust the products for…
Structural changes in the course of the worldwide industrial production and the …
The Quest Trend Magazine has analyzed the course of the worldwide industrial production in the last 30 years. Three structural changes became visible. They are forming the economic situation also these days.
The industrial production of the USA, Japan, Germany and the European Union showed an altogether continuous growth in the 20 years from 1980 to 2000. Economic crises with a decline in industrial production occurred in an interval of…
German machine-builders have been shifting their export markets since the world …
The still dominating role of the European Union countries for the machine export has dramatically been relativized since 2008. And even the export shares into the BRIC countries show up noticeable shifts.
The turnover of the German machinery industry achieved its crisis low with 67.5 index points (value index of the German Federal Statistical Office) at the beginning of 2010. Then started a rapid upward movement slightly exceeding with 137.6 at…
More Releases for TechnoMarketing
Latest Feedback of the German Machinery Industry on Industry 4.0 - New Report in …
Along the market survey from Quest TechnoMarketing about the engineering of the machine automation until 2017 the machine-builders also assessed “what Industry 4.0 is supposed to mean for the engineering of the machine until 2017”.
80% of the investigated machine-builders in the ten sectors of the German machinery industry provided their feedback to this question. The following numbers refer to these machine-builders.
The open question without further specifications invited to a…
Electric linear actuators have been growing for 10 years
Bochum, July 14, 2010. During the last 10 years from 2001 to 2010 the use of electric linear actuators in the German machinery industry has increased fivefold.
So the portion of the machine-builders using electric linear actuators at the machines increased from 3,5% to 19%.
Linear actuators produce a straight-line resp. translational motion. So e.g. the hot glue nozzle of a packaging machine can be guided straight-lined across a paper…
RFID - constantly and throughout the machinery industry implemented
Bochum, July 5, 2010. This year 14% of the machine-builders intend to implement RFID at the machines.
RFID stands for radio frequency identification and provides the wireless identification of goods, semi-manufactures or workpieces in the industrial sector.
Last year 15% of the machine-builders wanted to implement RFID at the machines. So RFID shows a constant implementation during the last two years.
This implementation is taking place with all or almost all of…
Intensified interest in application-optimised I/O modules
Bochum, June 15, 2010. The machine-builders are intensified interested in application-optimised I/O modules this year. This confirms the trend to fine-tuning the control and drive technologies that determines the changes in the automation technology this year.
With 11% each tenth machine-builders intend to change to application-optimised I/O modules this year. That is an increase in relation to the previous year by more than one third as this value was 8%.
What application-optimised…
Panel PC benefits from the current trend to fine-tuning the control technology
Bochum, 7th June 2010. Machine-builders prefer fine-tuning the control technology this year. This means to improve the consisting control technology at the machines instead of changing the control technology. The Panel PC benefits from this current trend.
Panel PC means operator panel with integrated control system. Compared with other control technologies such as PLC, PC, microprocessor control, CNC or contactor-based control technology the Panel PC shows the highest portion with new…
The trends in the automation - start of the serial „automation, supplier struc …
Bochum, May 25, 2010. The Quest Trend Magazine has recently published the first part of a three-part series of articles to the topic „automation, supplier structure, economic crisis“. It concerns the connection between automation technology, its suppliers and the economic crisis.
By now two main trends in the automation technology have been appearing. The first main trend of the automation substituted the electro-mechanics by microelectronics. The second main trend consists of…
