Digital cutting made easier than ever with new Zund Cut Center
Zünd Cut Center software dynamically guides the operator through the cutting process by continually offering best choices based on the material to be cut, available tooling, and quality requirements. Because the software basically eliminates the need for operator experience or trial and error, it minimizes set-up times, helps avoid mistakes, and ensures the cutter is running at maximum productivity levels at all times.
With a highly visual and intuitive user interface, Zund Cut Center encompasses all phases of an efficient graphics production workflow - including designing, planning, printing, and cutting. With Zund Cut Center, customers’ needs can be met faster, with higher and consistent quality and far less effort.
Cutting a job with Zund Cut Center is as easy as reading a barcode or selecting a job from the integral Cut Queue. Either approach puts an end to the time consuming task of locating a cut file for a new job or for reproducing an existing one. In addition, a new workflow utilizes job-specific details (such as material specifications, order ID, due date, and job priority) to determine when and how a job is cut.
• Cut Queue for quick file retrieval and access to the production schedule for job prioritization.
• Using the industry’s most sophisticated algorithm, “Best-Fit” compensation corrects for even the most non-uniform distortions, such as those seen in printed textiles.
• Cut Editor offers advanced editing functions, including router hatch/island fill used to create pockets in rigid substrates, overcut compensation to eliminate unsightly cuts on inside corners, etc.
“Zund Cut Center is far superior to anything in the marketplace,” says Lars Bendixen, the Sign and Graphics Product Manager for Zünd Systemtechnik AG. “In cooperation with leading RIP, ERP, and MIS software manufacturers, we expect to take automated workflow, production planning and reporting to the next level. The possibilities are unlimited.”
“Zund Cut Center is a direct result of our close cooperation with Grafitroniks, the developer and supplier of the widely used GTK Cut Pro and Touch & Cut Vision registration software. Their expertise combined with our knowledge of cutting hardware and workflow requirements were essential to the development of this new product,” says Oliver Zünd, Managing Director for Sign & Graphics at Zünd Systemtechnik AG.
Zund Cut Center will be demonstrated for the first time at Fespa in Munich and Viscom in Frankfurt, Germany.
About Zund Cut Center
• Saves time, cost, resources
• Reduces setup time
• Minimizes potential for operator error
• Includes 5 modules (Cut Server, Cut Center, Cut Queue, Cut Manager, Cut Editor)
• Compatible with all commonly used RIP software
• Acceptable vector file formats include ai, pdf, dxf, plt, eps, cf2, svg, hpg, hpgl, gtk, cut, zcc
About Zünd Systemtechnik AG
Zünd Systemtechnik AG has been redefining digital cutting technology for more than 25 years. With over 16,000 installations all around the world, Zünd’s award-winning cutting solutions are renowned for their performance, modularity, and productivity. Zünd is headquartered in Altstätten, Switzerland, and has more than 45 sales and service partners worldwide.
Zünd Systemtechnik AG Industriestrasse 8, 9450 Altstätten, Schweiz
T: +41-71-757-8100, F: +41-71-757 8111, firstname.lastname@example.org, www.zund.com
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Digital cutting made easier than ever with new Zund Cut Center here
News-ID: 128212 • Views: 4332
More Releases from Zünd Systemtechnik AG
Zünd to highlight and demonstrate sustainable practices at EcoPrint 2012
Sustainability benefits society in three ways - ecologically, socially and economically - and this has been Switzerland-based Zünd’s philosophy since its inception in 1984. All of Zünd’s leading edge cutting systems are developed, manufactured and operated with highest respect for the environment and for society as a whole. As such, Zünd has made the decision to exhibit at the EcoPrint show, scheduled for 26th and 27th September 2012 in Berlin,
Zünd presents latest innovations at Fespa
Altstätten, Switzerland (February 2012). At Fespa Digital Barcelona, Zünd is proudly presenting the brand-new S3 line of cutters. Following the introduction of G3 in 2008, Zünd Cut Center Software in 2010, and the fully automatic Board Handling System in 2011, Zünd continues its string of exciting new releases at this show, proving yet again why it is truly “Your first choice in digital cutting”. Experience the complete line-up of
It looks like we have a winner... another award for Zünd!
Altstätten, Switzerland (November 2011). Making it to the winners‘ podium again... The German printing industry’s prize for innovation was recently given out for the best print products of 2011 and their manufacturers. The new Board Handling System from Zünd Systemtechnik AG won 1st prize in the post-press technology category. PrintStars Aside from outstanding print products from print buyers, agents, and service providers, PrintStars also recognizes industry innovators and manufacturers in 13 categories.
Zünd receives multiple awards
Altstätten, Switzerland (May 2011). „Top Product Award 2011“ and EDP Award 2011 „Best Workflow Management Solution of the Year“ are two awards won by the Zünd G3 Cutter and Zünd Cut Center Software respectively. Top Product Award 2011 Every year the American magazine Wide-Format Imaging presents Top Products Awards for breakthrough products that have caused a great deal of excitement in the industry and proven to be a valuable asset to wide-
More Releases for Cut
Document Shredder Market by Type, (Strip-cut, Cross-cut, Micro-cut), Growth St …
Based on previous market performance, the Document Shredder market is expected to reach USD 6.8 billion in size by 2029. With an 8.6% CAGR. Document Shredder Market Overview: A paper shredder is a machine that cuts papers into small pieces before throwing them away. Many government agencies, private organizations, huge firms, small businesses, and individuals utilize this to trash confidential documents and sensitive information like marketing plans, financial statements, strategic objectives,
Plasma Cut – Your Metal Cutting Partner
Plasma Cut is one of the leading names in the laser cutting industry in South Africa. The company offers a wide-range of services which include laser cutting and the fabricating of steel, aluminium and various other metals including exotic alloys. Services Offered by Plasma Cut: 1. Laser Cutting: Plasma Cut applies laser cutting techniques to cut stainless steel and mild steel plates. The process cuts lengths up to 6 metres and with
Die-cut Lids Market - Rising Demand for Processed Food Vital for Die-cut Lids Ma …
The global die-cut lids market features a moderately consolidated at present, but could witness entry of several new participants rendering the market to be competitive, says a new report by Transparency Market Research (TMR). In the highly competitive market, players are strategizing on organic and inorganic growth to strengthen their footprint in emerging markets. Players are focused to leverage their core business strengths to bring new products to the market
Introducing New Cut Resistant Sleeves - Defensor by Ronco - Cut Level 5 protecti …
Concord, Ontario Feb 29: Ronco has introduced new CE Cut Level 5 Defensor™ sleeves. A large proportion of workplace accidents are attributed to workers not wearing or taking breaks from wearing their PPE because of discomfort. Made of 13 gauge HPPE (high performance polyethylene), the Defensor™ sleeves have a unique property of dissipating heat and is a solution to overcome discomfort even during prolonged usage. These sleeves are light-weight and
Cut food hygienically
Bizerba presents cutting machines for counters, kitchens and catering at the EuroShop 2011 (hall 6, booth E56) Balingen, February 26th 2011 - There are many causes for the premature deterioration of meat products. In addition to inappropriate storage and inadequate transportation, poor hygiene in further processing can also be responsible for this. The hygienic design of the Bizerba cutting machine helps food companies to minimise the risk of contamination in a
Cut, Color, Clarity, Carat: Perfection
FOR IMMEDIATE RELEASE Contact: Anny Deirmenjian Image Unlimited Communications© P. 781.721.4624 C. 617.851.9315 E. email@example.com Cut, Color, Clarity, Carat: Perfection Find the Perfect Diamond with the Boston Center