Press release
The degree of realization of Industry 4.0 in the sectors of the German machinery industry - Quest study
With all the technological solutions for Industry 4.0 presented at trade fairs and in trade journals, there is no systematic overview of the state of the realization of Industry 4.0 in the mechanical engineering. The Quest study provides it.The new report in the Quest Trend Magazine publishes from the study the degrees of realization of Industry 4.0 in machine automation in ten sectors of mechanical engineering.
The "degrees of realization" correspond to the five development stages in which Industry 4.0 is realized as a process. This starts with planned changes, continues with isolated implementations and extends to Industry 4.0 in subsystems and finally as system solution covering the entire machine/plant.
The study has examined eleven automation areas at the machines in numerous discussions with machine builders. These automation areas concern, among other things, changes in machine operation such as interactive or multimodal operation, use of apps and smartphones, etc., networking of the machine in MES, ERP, local, national and international for process control, enabling a self-optimizing production process for end customers, condition monitoring, predictive maintenance, energy-efficient, networked drives with intelligent energy and load management.
The report cites the latter automation area as examples of the degree to which Industry 4.0 has been implemented.
The report shows that on average of the ten sectors one third of industry 4.0 implementations consists of system solutions, a further 41% Industry 4.0 is implemented in sub-areas of machine automation.
The robotics and automation sector is at the top of the list of sectors with regard to the implementation of Industry 4.0. The ranking is completed by woodworking machines.
This ranking does not represent an evaluation but documents the extent to which Industry 4.0 should lead to create customer benefits.
The link to the new report in the Quest Trend Magazine is https://www.quest-trendmagazine.com/en/industry-40/realization-of-industry-40-in-sectors-of-machinery-industry.html
About Quest Trend Magazine:
Quest Trend Magazine publishes trends in automation from the users's point of view mainly in machinery industry, automotive and F&B industry. The economic backdrop of these trends is highlighted as well.
The trends in automation technology are based on market surveys by Quest TechnoMarketing. The economic backdrop is analyzed by Quest Research, a department of Quest TechnoMarketing.
About Quest TechnoMarketing:
Quest TechnoMarketing, Bochum, London, is specialized in market surveys and marketing for the automation technology for more than 20 years and the publisher of the Quest Trend Magazine.
Thomas Quest
Quest Trend Magazine
Dibergstr. 64
44789 Bochum, Germany
Phone +49 234-34777
Fax +49 234-33 22 02
Email: media@quest-trendmagazine.com
Internet: https://www.quest-trendmagazine.com
Quest TechnoMarketing
Thomas Quest
Dibergstr. 64
44789 Bochum, Germany
Phone +49 234-34777
Fax +49 234-33 22 02
Email: media@quest-technomarketing.com
Internet: https://www.quest-technomarketing.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release The degree of realization of Industry 4.0 in the sectors of the German machinery industry - Quest study here
News-ID: 1247355 • Views: …
More Releases from Quest Trend Magazine
China, the USA increase market share in world car production, Japan, Germany los …
The new Quest Trend Report establishes the ranking of the world market shares of the automotive countries and lists their market shares for 2018 and in comparison to 2010.
In the ranking of the ten largest automotive countries in the period from 2010 to 2018, only first place, China, and tenth place, France, remained unchanged. The eight other automotive countries changed their position among the ten largest automotive countries.
The world's…
Global automobile production has been stagnating since the global economic crisi …
The new Quest Trend Report analyzes global auto production since the global economic crisis of 2007 to 2018 and the contribution of China and its market share to global auto production.
World car production plunged to its crisis low in 2009. But one year later it had not only left this crisis low behind it, it had even surpassed its pre-crisis level! The jump in world car production was not primarily…
Automobile production in Germany: Trend change from growth to decline – new Qu …
The change in trend has been taking place in the German automotive industry since mid-2018, as the updated economic report in the Quest Trend Magazine shows.
The monthly updated economic report covers the period from 2008 to 2019 May. The trend in production and sales in the German automotive industry is methodically determined as the average of the last twelve months.
The trend in automobile production in Germany surpassed its pre-crisis…
Germany's industrial production growing at 2% p.a., stagnation likely for 2019
The new Quest Economic Report examines the trend growth of industrial production in Germany and combines the current situation with a trend forecast.
The new Quest Economic Report examines the trend growth of industrial production in Germany. The trend is defined as the moving average of the last 12 months. The report divides the trend in industrial production into two phases since 2008.
Only at the end of 2015 the trend…
More Releases for Industry
Hydro Lubricants Market Size, Analysis, and Forecast Report 2018 to 2026(By Indu …
The rising demand for hydro lubricants from manufacturing sector is also multiplying at a faster rate, on the back of their competency in upgrading the service-life of machinery. The hydro lubricants market is primarily driven on account of its low-friction attributes, which makes it highly likely to outshine the synthetic variants. Moreover, the demand for hydro lubricants for machinery assemblies is on the rise, as they facilitate in minimizing…
Hydro Lubricants Market Insights, Trends & Future Development Status Recorded du …
The rising demand for hydro lubricants from manufacturing sector is also multiplying at a faster rate, on the back of their competency in upgrading the service-life of machinery. The hydro lubricants market is primarily driven on account of its low-friction attributes, which makes it highly likely to outshine the synthetic variants. Moreover, the demand for hydro lubricants for machinery assemblies is on the rise, as they facilitate in minimizing…
Global Pyrite Market 2019 | Applications: Jewelry Industry, Sulfur Compounds Ind …
The major factor driving the pyrite market is the rising demand of jewelry and sulfur compounds market. This report researches the worldwide Pyrite market size (value, capacity, production, and consumption) in key regions like North America, Europe, Asia Pacific (China, Japan) and other regions. This study categorizes the global Pyrite breakdown data by manufacturers, region, type, and application, also analyzes the market status, market share, growth rate, future trends, market…
Big Bag Connection System Market Segmented By technology Automatic, Semi-Automat …
Global Big Bag Connection System Market: An Overview
The key advancement in automation encourages manufacturers to adopt smart systems to increase productivity and to facilitate timely production. Owing to the perception of consumers as well as manufacturers regarding health and hygiene of product, the big bag connection system market is anticipated to propel during the forecast period. Big bag connection system ensure dust -free docking of big bags and provide flexibility…
Global Nutraceuticals Market By Application | Food Industry, Ink Industry, Medic …
Researchmoz added Most up-to-date research on "Global Nutraceuticals Market By Application | Food Industry, Ink Industry, Medicine Industry, Electronic Industry and Paint Industry" to its huge collection of research reports.
This report studies Nutraceuticals in Global market, especially in North America, China, Europe, Southeast Asia, Japan and India, with production, revenue, consumption, import and export in these regions, from 2012 to 2016, and forecast to 2022.
This report focuses on top manufacturers…
Europe Plastic Pallet Market Size, Shares, Forecast Report 2016 : Food Industry, …
This report studies sales (consumption) of Plastic Pallet in Europe market, especially in Germany, UK, France, Russia, Italy, Benelux and Spain, focuses on top players in these countries, with sales, price, revenue and market share for each player in these Countries, covering
ShangHai Pallet Plastic Industry Co., Ltd.
Shanghai Lika Plastic Manufacturing Co., Ltd.
Guangzhou Plastic Industrial Corporation Ltd
Shandong Liyang Plastic Molding Co.,Ltd
Xinding Plastic
ZheJiang Primacy Plastic Industry Co., Ltd
Shanghai Qinghao Plastic Pallet Manufacture…
