openPR Logo
Press release

CARcorder – Data Logger for FlexRay and CAN

01-20-2010 12:27 PM CET | Industry, Real Estate & Construction

Press release from: IXXAT Automation GmbH

CARcorder - Data logger for FlexRay and CAN

CARcorder - Data logger for FlexRay and CAN

IXXAT presents on the Embedded World fair the first version of its new data logger for automotive communication systems

The CARcorder is available as Basic or Plus version. The Basic version provides already six CAN interfaces (ISO 11898-2 / 11898-3), two LIN and two RS232 interfaces, an USB host/device interface as well as an interface switchable between SAE J1850 and K/L-line. In addition, the device comes with digital and analog inputs and outputs each providing eight channels.
Furthermore, the Plus version of the CARcorder offers a FlexRay interface with two channels.

The two processor architecture of the CARcorder enables the fanless device to record all data synchronous and without any losses in real time and with a time stamp accuracy of 1 µs.

The device is delivered with a rugged aluminum case, an integrated UPS for up to 10 seconds of power cut and it has a power consumption of less than 10 mW in deep sleep mode. The wake up is initiated with the first valid message, which will be recorded also. The power supply can be made in a wide range between 6.5 and 40 V DC.
With the PC-based software tool, the device can be configured via Ethernet, a direct USB connection or an USB stick. The software also enables the user to define
trigger conditions and to set-up diagnostic tasks. The bus configuration is done by importing the related bus description files (CANdB, FIBEX, A2L, ODX, open XML).

Besides the CARcorder, IXXAT presents further products for the automotive area on the fair, like the Automotive Development Platform ATP, FlexRay/CAN interfaces, analysing tools and gateways.

For further information about the CARcorder please visit www.ixxat.de.

IXXAT Automation GmbH is a leading supplier of data communication systems for industrial automation and automotive applications. The main technologies in the field of industrial communication systems are solutions based on CAN (CANopen, DeviceNet), Ethernet (ETHERNET Powerlink, EtherNet/IP, Profinet, EtherCAT) as well as TCP/IP with the associated Internet protocols. For automotive applications, IXXAT focuses on solutions based on CAN (diagnosis protocols, SAE J1939), FlexRay and LIN. The product range comprises interface boards, test systems, analyzing tools and protocol software.

As of December 2009, IXXAT provides work for 80 employees, predominantly engineers skilled in electronic engineering and computer science and has a certified quality assurance management according to ISO9001.
Our customers are well-known companies all over the world from the industrial and automotive sectors.

IXXAT supports its customers completely in the establishment and application of communication systems based on CAN and TCP/IP, from seminars and consulting, design of system solutions, development and implementation of hardware and software to the supply of a complete product line. Furthermore IXXAT is able to perform safety relevant hardware and software development according to IEC61508.

IXXAT Automation GmbH
Leibnizstr. 15
D-88250 Weingarten
Tel.: +49-(0)7 51 / 5 61 46-0
Fax: +49-(0)7 51 / 5 61 46-29
E-mail: info@ixxat.de
Internet: www.ixxat.de

Contact:
Frank Pastors
Tel.: +49-751-56146-111

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release CARcorder – Data Logger for FlexRay and CAN here

News-ID: 117437 • Views: 1571

More Releases from IXXAT Automation GmbH

Real-time operating system support for IXXAT's CAN interfaces
ECI driver for QNX, INtime, RTX and Linux With the current ECI driver IXXAT offers a powerful programming interface for its CAN PC interfaces, specially adapted to the requirements of embedded applications. CAN-based control and test systems can easily and quickly be achieved, both in the industrial and automotive area. The latest version of the ECI (Embedded Communication Interface) is available for the operating systems QNX (6.5.0), INtime (3.14, 4.2, 5.0), RTX
IXXEC-100 - The cost-effective EtherCAT Master solution for DIN rail mounting
With its new IXXEC-100, IXXAT offers a powerful and extremely flexible EtherCAT Master solution for DIN rail mounting at a very compelling price. The EtherCAT Master functionality is provided using the proven protocol software from acontis for EtherCAT Master Class A and B devices. A specially optimized link layer allows the IXXEC-100 to operate with cycle times of less than 1 ms. The selected EtherCAT Master implementation, as well as the
FRC-EP190 - Communication platform for automotive bus systems with extensive sof …
With its new FRC-EP190, IXXAT offers a universal hardware platform for FlexRay, CAN, LIN and K-Line with impressive performance, a reasonable price and a wide range of applications and solutions. With increasing complexity in automobile technology, suitable solutions for communication with the control units are required - whether for the development, test benches or test driving. Such solutions must be inexpensive, easy to operate and robust. With the FRC-EP150 and the
Software package for the development of CANopen applications under Microsoft Win …
IXXAT Automation is pleased to announce the immediate availability of version 6.1 of the CANopen Master API. In addition to previously supported CAN interfaces, CANopen Master API 6.1 now works with the new FPGA based CAN-IB200/PCIe active CAN interface. With the CANopen Master API, IXXAT offers a proven solution for a quick and easy development of PC based CANopen® control, test and service applications under Microsoft Windows. The new CANopen Master API

All 5 Releases


More Releases for CARcorder

IXXAT CARcorder – Logging of Automotive Bus Systems
IXXAT's CARcorder is an universal, automotive diagnosis and logging system for all vehicle communication busses. The two processor architecture enables the fanless device to record all traffic synchronous and without loosing any data. At this, the CARcorder provides the following interfaces: FlexRay, 6 x CAN, 4 x LIN, K-Line, Ethernet, Digital/Analog-IO and RS232. The logging application runs on an embedded PC with 520 MHz clock frequency and Windows CE operating system.