Press release
CRP USA at 2018 SmallSat Conference
3D printed functional CubeSat in Windform XT 2.0
The event will be held at the Taggart Student Center, and CRP USA will be exhibiting at booth 43T.
They will be displaying cutting edge solutions for the space industry (http://www.crp-usa.net/aerospace-case-studies/) manufactured in the Windform family of high performance materials (www.windform.com). Among the latest successful 3D printed Space applications, SmallSat attendees will admire a unique CubeSat designed both as a CubeSat and as a dispensing system for two smaller TubeSats.
CRP USA works alongside key space industry leaders. At SmallSat 2018 CRP USA and their staff will demonstrate the effectiveness of additive manufacturing and use of Windform as a structural material for space applications such as smallsats, since most of the Windform composite materials have passed outgassing tests and are qualify for space applications.
During the 32nd AIAA/USU Conference on Small Satellites, it will be explored the new technologies, design methods, processes, operational constructs, and activities that inform and secure the success of small satellite missions.
Based in Mooresville, North Carolina, CRP USA is partnered with CRP group.
CRP USA resides in the heart of the southern industrial and manufacturing hub, and is surrounded by growing aerospace and motorsports communities.
CRP USA manufacturers on-car and wind tunnel components for racing teams and has taken this expertise to new heights to produce parts for the space, entertainment and automotive sectors using Windform® materials and Additive Manufacturing.
Veronica Negrelli
Press Officer
via Cesare della Chiesa 41
41126 Modena
Italy
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release CRP USA at 2018 SmallSat Conference here
News-ID: 1157149 • Views: …
More Releases from CRP Group
CRP at MIA EEMS 2019
CRP will be attending the 2019 MIA EEMS Energy-Efficient Motorsport Conference (9 January, NEC Birmingham, UK) by showcasing the latest end use parts manufactured by cutting-edge Additive and Subtractive Manufacturing technologies for the most demanding sectors
The MIA Entertainment and Energy-Efficient Motorsport Conference (EEMS) in association with AVL RACING at Autosport International, will be held at NEC (Concourse Suites 1 & 2, B40 1NT) Birmingham, UK on the 9th of January…
Updated 3D printed fairing for Ego Corsa
At the last series of tests carried on at the TT Circuit Assen, the 2019 Ego Corsa prototype was on track with a new 3D printed fairing with improved aerodynamics.
The 3D printed fairing was manufactured by CRP Technology via Laser Sintering using Windform XT 2.0 Carbon-fiber reinforced composite material.
“We have had the fairing available in short time” the Energica technical staff states.
Thanks to the professional 3D printing and…
Red Dot 2018: CRP Technology’s know-how helped to win Design Award!
Tundra®, Hexadrone’s first fully modular and easy-to-use drone for industrial and multi-purpose tasks, has won the Red Dot Award 2018 in the drone category.
The evaluation process (static test and assess) has been performed on the 3D printed Tundra® prototype manufactured by CRP Technology via Laser Sintering technology using Windform SP and Windform XT 2.0 Carbon-composite materials.
The award ceremony will be taking place in the Aalto-Theater, Essen (Germany) on…
More Releases for Windform
Excellent Electrical Insulation Performance for Windform Composites
3D printing service bureau CRP Technology's Glass fiber reinforced Windform thermoplastic composites were subjected to dielectric constant and dielectric strength tests, and the results were excellent, exhibiting a dielectric constant of approximately 4 and withstanding peak voltages of at least 2.5 kV/mm.
3D printing service bureau CRP Technology is pleased to inform that their Glass fiber reinforced Windform thermoplastic composites for Selective Laser Sintering, have demonstrated outstanding electrical insulation performance as…
Windform RS and Windform LX 3.0 officially approved for space flight
Carbon fiber reinforced composite Windform RS and Glass fiber reinforced composite Windform LX 3.0 from CRP Technology's Windform TOP-LINE, passed ESA standard screening outgassing tests in accordance with ESA-TEC-PR-002015 (based on ECSS-Q-ST-70-02C): they are officially approved for the construction of applications to launch into Space.
Franco Cevolini, CEO and Technical Director of CRP Technology, says: "Passing the outgassing tests is a crucial factor for those who supply materials to the…
Windform® RS, the outstanding composite material with amazing mechanical proper …
CRP Technology launches a new polyamide-based Carbon fiber filled composite for production-grade PBF 3D printing: the top-of-the-range Windform® RS. Engineer Franco Cevolini, CEO and CTO, CRP Technology: "In the Additive Manufacturing world Windform® RS is unparalleled. We created a material that combines high tensile strength with high elongation at break and low density: Windform® RS is unique of its kind"
CRP Technology, a leading 3D printing company, announces the…
3D printed satellite deployer in Windform XT 2.0 acclaimed for its mechanical fe …
Recently Alba Orbital’s AlbaPod V2 hyped up for its unique design, lightweight, easily integration into space launch vehicles, maintenance of the demanding quality standards for space. These characteristics have also made possible thanks to the use of AM and Windform XT 2.0 Carbon composite material
The European Space Agency (ESA) dedicated an article on Alba Orbital's cutting edge 3D printed satellite dispenser, AlbaPod V2, manufactured by CRP Technology using laser sintering…
CRP Windform FR2, new cutting-edge composite material for Additive Manufacturing
CRP Technology, the long-standing leading company in the field of advanced technologies and professional 3D printing, launches on the market a flame-retardant glass fiber reinforced material for Selective Laser Sintering
CRP Technology's hi-tech advancement is unstoppable. Less than six months after the launch on the market of Windform FR1, the first carbon fiber-reinforced flame-retardant material for professional 3D printing, CRP Technology is presenting a new composite material from the TOP-LINE family…
CRP Technology launches Windform® P2, thermoplastic glass fiber filled material …
CRP Technology, a leading company in the creation of prototypes and final applications in professional 3D printing, launches Windform® P2 material.
Windform® P2 is a glass fiber reinforced thermoplastic polyamide material with excellent mechanical properties for High Speed Sintering process.
Engineer Franco Cevolini, CRP Technology CTO and VP, states: “Windform® P2 is the second polymer from P-LINE, the new Windform® range of materials for high speed production-grade 3D printing, introduced on the…
