Press release
Sheet Molding Compound and Bulk Molding Compound Market Analysis 2021 IDI Composite International, Citadel Plastics Holding Inc., Menzolit GmbH, Polynt S.P.A,, Core Molding Technologies Inc., Continental Structural Plastics Inc., Showa Denko K.K., Changzh
Sheet Molding Compound (SMC) is a fiber protected polymer matrix composite material which offers a range of beneficial properties that are demanded by various modern applications. Bulk Molding Compound (BMC) is any combination of cut glass components and resin in the form of a bulk pre-preg. Bulk molding compound is mainly suitable either for compression or injection molding. Transportation, electrical, construction and other applications such as aerospace, automotive, marine and consumer industries are increasing using sheet molding compound to take better advantage of its performance. Glass fiber is expected to hold the maximum market share of USD 589.5 million by 2021, growing at a CAGR of 6.7%. The global sheet molding compound and bulk molding compound market is expected to and reach USD 3,531.1 Million at the end of the forecasted period and is expected to show a staggering growth at CAGR of 6.5% from 2016 to 2021.
Request a Sample Report @ https://www.marketresearchfuture.com/sample_request/1671
Study Objectives of Global Sheet Molding Compound and Bulk Molding Compound Market
• To provide detailed analysis of the market structure along with forecast for the next 5 years of various segments and sub-segments of the global sheet molding compound and bulk molding compound market
• To provide insights about factors affecting the market growth
• To analyze the global sheet molding compound and bulk molding compound market based on various factors- price analysis, supply chain analysis, porters five force analysis etc.
• To provide historical and forecast revenue of the market segments and sub-segments with respect to four main geographies and their countries- North America, Europe, APAC, and Rest of the World (ROW)
• To provide country level analysis of the market with respect to the current market size and future prospective
Key Players
IDI Composite International
Citadel Plastics Holding Inc.
Menzolit GmbH
Polynt S.P.A,
Core Molding Technologies Inc.
Continental Structural Plastics Inc.
Showa Denko K.K.
Changzhou Runxia Fiberglass Products Co., Ltd
Royal Tencate.
Global sheet molding compound and bulk molding compound Market Share (2015)
Target Audience
• Manufactures
• Raw material Suppliers
• Aftermarket suppliers
• Research Institute / Education Institute
• Potential Investors
• Key executive (CEO and COO) and strategy growth manager
Do Enquiry and Ask for Discount @ https://www.marketresearchfuture.com/check-discount/1671
Product Analysis
• Product matrix which gives a detailed comparison of the market for different recycled product types
Additional Information
• Regulatory Landscape
• Pricing Analysis
• Macroeconomic Indicators
Geographic Analysis
• Geographical analysis across 15 countries
Company Information
• Profiling of 10 key market players
• In-depth analysis including SWOT analysis, and strategy information of related to report title
• Competitive landscape including emerging trends adopted by major companies
Regional Analysis of Global Sheet Molding Compound and Bulk Molding Compound Market
APAC will expand at a CAGR 7.2% over the forecast period with largest market size of USD 1,885.2 million by 2021. The share is attributed to the growing transportation and electrical & electronics industries in this region. China stands on the top most position as producers and consumer which account the total of around 50% of the global market.
However Europe is expected to acquire a market share of USD 923.7 million and will expand at a CAGR 4.9% by 2021. It is followed by U.S.
Browse Full Report Details @ https://www.marketresearchfuture.com/reports/sheet-molding-compound-market-1671
About Market Research Future:
At Market Research Future (MRFR), we enable our customers to unravel the complexity of various industries through our Cooked Research Report (CRR), Half-Cooked Research Reports (HCRR), Raw Research Reports (3R), Continuous-Feed Research (CFR), and Market Research & Consulting Services.
MRFR team have supreme objective to provide the optimum quality market research and intelligence services to our clients. Our market research studies by Components, Application, Logistics and market players for global, regional, and country level market segments, enable our clients to see more, know more, and do more, which help to answer all their most important questions.
Contact:
Market Research Future
Office No. 524/528, Amanora Chambers
Magarpatta Road, Hadapsar
Pune - 411028
Maharashtra, India
+1 646 845 9312
Email: sales@marketresearchfuture.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Sheet Molding Compound and Bulk Molding Compound Market Analysis 2021 IDI Composite International, Citadel Plastics Holding Inc., Menzolit GmbH, Polynt S.P.A,, Core Molding Technologies Inc., Continental Structural Plastics Inc., Showa Denko K.K., Changzh here
News-ID: 1091597 • Views: …
More Releases from Market Research Future (MRFR)
Military Robots Market USD 74.5 billion by 2035, Due to Increasing Geopolitical …
Military Robots Market Outlook
The Military Robots Market was valued at USD 38.78 billion in 2023 and is projected to grow to USD 74.5 billion by 2035, reflecting a CAGR of 5.59% from 2025 to 2035. This growth trajectory underscores the increasing reliance of modern defense forces on robotics and autonomous systems for enhancing operational efficiency, safety, and strategic capabilities. The rising demand for unmanned systems across land, air, sea,…
Electronic Warfare Market Size USD 20.43 billion by 2030, Driven by rising Cyber …
Electronic Warfare Market Outlook
The Electronic Warfare Market was valued at USD 15.5 billion in 2022 and is projected to grow from USD 16.12 billion in 2023 to USD 20.43 billion by 2030, with a CAGR of 4.03%. This robust trajectory reflects a combination of geopolitical tensions, rapid technological advancement, and sustained defense spending across major regions. Electronic warfare (EW) systems, which encompass electronic attack (EA), electronic protection (EP), and electronic…
Caramel Market 2024-2032: Trends, Growth & Innovations Sweetening the Global Tab …
The global caramel market is on a sweet climb. Valued at USD 2.35 billion in 2023, it is forecast to rise to USD 3.74 billion by 2032, growing at a Compound Annual Growth Rate CAGR of 5.71% between 2024‐2032. This growth is being driven by shifting eating habits, increasing demand in developing economies, and rising consumer interest in indulgent, sweet flavors.
Obtain a Sample File Containing Insights from Camping Beds…
Sugar-Free Chocolate Market: A Sweet Spot for Health-Focused Innovation
In an era where health consciousness increasingly influences food choices, the global sugar-free chocolate market is carving out a significant growth trajectory. According to a recent MRFR report, the market was valued at USD 1.52 billion in 2024 and is projected to reach USD 2.58 billion by 2034, growing at a compound annual growth rate CAGR of 5.4% during 2025-2034.
Obtain a Sample File Containing Insights from Camping Beds and Mats…
More Releases for Molding
LSR Molding: Understanding Silicone Rubber Injection Molding
Liquid Silicone Rubber (LSR) molding is a specialized manufacturing process used to create flexible, durable, and heat-resistant silicone parts. This technique is widely used across industries such as automotive, medical, electronics, and consumer goods. Its ability to produce high-quality parts with precision and consistency makes it a top choice for many manufacturers.
• What Is LSR Molding?
LSR molding, or Liquid Silicone Rubber injection molding (https://www.newtopcustomsilicone.com/capabilities/liquid-silicone-injection-molding/), involves injecting two-component platinum-cured silicone into…
Molding the Future: Plastic Injection Molding Machine Market Forecast (2023-2033 …
The global plastic injection molding machine market size was $10.3 billion in 2021 and is anticipated to reach $16.4 billion in 2031, growing at a rate of 4.8% from 2022 to 2031.
Market Outlook:
The Plastic Injection Molding Machine Market anticipates molding the future with a positive outlook from 2023 to 2033. As industries across the globe witness a surge in demand for plastic products, the market expects significant growth in the…
HDPE Blow Molding and Injection Molding Containers Market
Persistence Market Research (PMR) has published a new research report on HDPE blow molding and injection molding containers. The report has been titled "HDPE Blow Molding and Injection Molding Containers Market: Global Industry Analysis 2013-2017 and Forecast 2018-2026." The proliferating demand for HDPE blow molding and injection molding containers is largely from the beverage, chemical & petrochemicals, and pharmaceuticals industries, owing to the barrier properties of HDPE and convenience in…
Sheet Molding Compound and Bulk Molding Compound Market - Growth Prophesy 2025 | …
Global Sheet Molding Compound and Bulk Molding Compound Market: Snapshot
The global market for sheet molding compound and bulk molding compound is expected to advance with the launch of superior quality, lightweight, and more durable bulk molding and sheet molding compounds. By virtue of their higher line throughputs and lower production costs, these compounds are increasingly preferred by several leading manufacturers. As an augmenting number of advanced automobiles and luxury brands…
HDPE Blow Molding and Injection Molding Containers Market 2026
Due to its intrinsic physical and mechanical properties, high density polyethylene (HDPE) is highly used as packaging materials in different industries including food, beverages, pharmaceuticals, cosmetics, homecare, chemicals, and petrochemicals. Urbanization, changing consumer preferences, and expanding middle class have significantly contributed to the rising demand for consumer goods. Increased demand for consumer goods has, in turn, revolutionized the packaging industry, especially plastic packaging.
Polyethylene is most commonly used in the packaging…
Sheet Molding Compound and Bulk Molding Compound Market 2017-2025 : Polynt S.P.A …
Global Sheet Molding Compound and Bulk Molding Compound Market: Snapshot
The global market for sheet molding compound and bulk molding compound is expected to advance with the launch of superior quality, lightweight, and more durable bulk molding and sheet molding compounds. By virtue of their higher line throughputs and lower production costs, these compounds are increasingly preferred by several leading manufacturers. As an augmenting number of advanced automobiles and luxury brands…
