openPR Logo
Press release

Growth expectations to 2020 in Robotics and Automation twice as high as in machinery industry

06-13-2018 01:41 PM CET | Industry, Real Estate & Construction

Press release from: Quest Trend Magazine

Growth expectations to 2020

Growth expectations to 2020

The high growth expectations in Robotics and Automation reflect the above-average growth of the sector.

Production in the sector Robotics and Automation grew by 30% more strongly than that of machinery industry from 2014 to 2017. This positive development naturally influences the growth expectations of machine-builders in this sector.

Manufacturers of robotics and automation expect their machine production to grow by 11% per year to 2020. This expectation is twice as high as in machinery industry. Growth in machinery industry is expected to reach 5.5% per year to 2020. This is the result of a market survey conducted by Quest TechnoMarketing in the German mechanical engineering sector.

The new industry report in Quest Trend Magazine divides the growth expectations into various growth ranges. A twofold division of growth expectations in the sector Robotics and Automation becomes apparent. Almost three-quarters of the interviewed machine-builders do not expect any growth in machine production to 2020. However, more than a quarter expects above-average growth between 10% and 20% per year.

This division also reflects the uneven situation of global industrial production and the most important export markets.

The report is available on http://www.quest-trendmagazine.com/en/machinery-industry/robotics-and-automation/growth-expectations-in-sector-robotics-and-automation.html

The Quest Trend Magazine has published further industry reports about printing and paper machines, conveyor, rubber/plastic machines, food processing machines, packaging machines and machine tools.

These industry reports make it easier for machine-builders to classify their experience in long-term contexts and to determine their position.

About Quest Trend Magazine:
Quest Trend Magazine publishes trends in automation from the users's point of view mainly in machinery industry, automotive and F&B industry. The economic backdrop of these trends is highlighted as well.

The trends in automation technology are based on market surveys by Quest TechnoMarketing. The economic backdrop is analyzed by Quest Research, a department of Quest TechnoMarketing.

About Quest TechnoMarketing:
Quest TechnoMarketing, Bochum, London, is specialized in market surveys and marketing for the automation technology for more than 20 years and the publisher of the Quest Trend Magazine.

Thomas Quest
Quest Trend Magazine
Dibergstr. 64
44789 Bochum, Germany
Phone +49 234-34777
Fax +49 234-33 22 02
Email: media@quest-trendmagazine.com
Internet: http://www.quest-trendmagazine.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Growth expectations to 2020 in Robotics and Automation twice as high as in machinery industry here

News-ID: 1080104 • Views:

More Releases from Quest Trend Magazine

China, the USA increase market share in world car production, Japan, Germany lose - new Quest Report
China, the USA increase market share in world car production, Japan, Germany los …
The new Quest Trend Report establishes the ranking of the world market shares of the automotive countries and lists their market shares for 2018 and in comparison to 2010. In the ranking of the ten largest automotive countries in the period from 2010 to 2018, only first place, China, and tenth place, France, remained unchanged. The eight other automotive countries changed their position among the ten largest automotive countries. The world's
Global automobile production has been stagnating since the global economic crisis without China - new Quest Trend Report
Global automobile production has been stagnating since the global economic crisi …
The new Quest Trend Report analyzes global auto production since the global economic crisis of 2007 to 2018 and the contribution of China and its market share to global auto production. World car production plunged to its crisis low in 2009. But one year later it had not only left this crisis low behind it, it had even surpassed its pre-crisis level! The jump in world car production was not primarily
Automobile production in Germany: Trend change from growth to decline – new Quest economic report
Automobile production in Germany: Trend change from growth to decline – new Qu …
The change in trend has been taking place in the German automotive industry since mid-2018, as the updated economic report in the Quest Trend Magazine shows. The monthly updated economic report covers the period from 2008 to 2019 May. The trend in production and sales in the German automotive industry is methodically determined as the average of the last twelve months. The trend in automobile production in Germany surpassed its pre-crisis
Germany's industrial production growing at 2% p.a., stagnation likely for 2019
Germany's industrial production growing at 2% p.a., stagnation likely for 2019
The new Quest Economic Report examines the trend growth of industrial production in Germany and combines the current situation with a trend forecast. The new Quest Economic Report examines the trend growth of industrial production in Germany. The trend is defined as the moving average of the last 12 months. The report divides the trend in industrial production into two phases since 2008. Only at the end of 2015 the trend

All 5 Releases


More Releases for TechnoMarketing

Latest Feedback of the German Machinery Industry on Industry 4.0 - New Report in …
Along the market survey from Quest TechnoMarketing about the engineering of the machine automation until 2017 the machine-builders also assessed “what Industry 4.0 is supposed to mean for the engineering of the machine until 2017”. 80% of the investigated machine-builders in the ten sectors of the German machinery industry provided their feedback to this question. The following numbers refer to these machine-builders. The open question without further specifications invited to a
Electric linear actuators have been growing for 10 years
Bochum, July 14, 2010. During the last 10 years from 2001 to 2010 the use of electric linear actuators in the German machinery industry has increased fivefold. So the portion of the machine-builders using electric linear actuators at the machines increased from 3,5% to 19%. Linear actuators produce a straight-line resp. translational motion. So e.g. the hot glue nozzle of a packaging machine can be guided straight-lined across a paper
RFID - constantly and throughout the machinery industry implemented
Bochum, July 5, 2010. This year 14% of the machine-builders intend to implement RFID at the machines. RFID stands for radio frequency identification and provides the wireless identification of goods, semi-manufactures or workpieces in the industrial sector. Last year 15% of the machine-builders wanted to implement RFID at the machines. So RFID shows a constant implementation during the last two years. This implementation is taking place with all or almost all of
Intensified interest in application-optimised I/O modules
Bochum, June 15, 2010. The machine-builders are intensified interested in application-optimised I/O modules this year. This confirms the trend to fine-tuning the control and drive technologies that determines the changes in the automation technology this year. With 11% each tenth machine-builders intend to change to application-optimised I/O modules this year. That is an increase in relation to the previous year by more than one third as this value was 8%. What application-optimised
Panel PC benefits from the current trend to fine-tuning the control technology
Bochum, 7th June 2010. Machine-builders prefer fine-tuning the control technology this year. This means to improve the consisting control technology at the machines instead of changing the control technology. The Panel PC benefits from this current trend. Panel PC means operator panel with integrated control system. Compared with other control technologies such as PLC, PC, microprocessor control, CNC or contactor-based control technology the Panel PC shows the highest portion with new
The trends in the automation - start of the serial „automation, supplier struc …
Bochum, May 25, 2010. The Quest Trend Magazine has recently published the first part of a three-part series of articles to the topic „automation, supplier structure, economic crisis“. It concerns the connection between automation technology, its suppliers and the economic crisis. By now two main trends in the automation technology have been appearing. The first main trend of the automation substituted the electro-mechanics by microelectronics. The second main trend consists of