openPR Logo
Press release

Microfluidic Market - Global Industry Analysis 2025

03-31-2018 08:57 AM CET | Health & Medicine

Press release from: CMI - Research Reports

Microfluidic devices enables the precise processing of micro liter (~0.01-10 µl) samples and allows to perform significant biological or chemical processing such as sampling, pre-processing and measurement involved in an assay within a single chip. Microfluidics aids in handling and examining very small fluid volumes, around micro- (10-6) to atto- (10-18) liter volumes of fluid, which provides several analytical and economic advantages over the conventional assays. Microfluidic devices typically requires 10x times less sample volume, thereby allowing less sample and reagent consumption. Microfluidic devices transfers such small amount of fluid volume through microfluidic channels, which provides higher surface area to volume ratio, which further enhance the heat transfer. Increasing advancements in microfluidics such as lab-on-a-chip device for DNA amplification, purification, separation and sequencing, and single cell gene-expression profiling is expected to aid in growth of the market. Microfluidic provides enhanced analytical sensitivity, enhanced temperature control, faster reaction time, cost efficiency and allows integration of lab routines in a single device.

Request to download and view Sample Report: https://www.coherentmarketinsights.com/insight/request-sample/1086

The global microfluidic market was valued at US$ 2.8 billion in 2016 and is expected to witness a robust CAGR of 19.4% over the forecast period (2017–2025).

Rising demand for point-of-care testing to augment microfluidic market growth

Point-of-care testing (POC Testing) is medical diagnostic testing performed primarily outside medical care facilities and in close proximity that is at the time and place of patient care. Point-of-care testing is relatively expensive than regular lab testing; however, it offers appropriate and immediate results for further clinical management. Microfluidic technology primarily offers three advantages to POC diagnostic: smaller sample volume, lower test costs, and faster detection time. Point-of-care testing enables miniaturization and integration of complex functions facilitating their usage in limited resources.

Continuous innovation strategy adopted by manufacturers is expected to aid in accelerating growth of the microfluidic market

Adoption of microfluidics as a key technology in medical science and biosensing is increasing significantly in the recent past. Manufacturers are focusing on continuous innovation in microfluidic technology such as laboratory-on-a-chip, point-of-care testing, microfluidic enabled drug delivery systems, and microfluidic gradient generators to enhance their product portfolios. Introduction of thermoplastic as a new material for microfluidic device fabrication instead of conventional PDMS polymer, adoption of novel microfluidic flow rate detection method, and advancement in nanoparticle separation using microfluidic devices is further expected to boost the microfluidic market in the near future. Microfluidic techniques are being extensively used to separate micro sized particles such as blood cells, parasites, spores, tumor cells, and bacteria due to its advantages such as low sample volume, low cost, and miniature sample handing with precise control. However, to separate submicron particle, nanofluidics is emerging as a suitable technology for separation.

Request a Customization: https://www.coherentmarketinsights.com/insight/request-customization/1086

Some of the major players operating in the microfluidic market are Abbott Laboratories, Agilent Technologies, Thermo Fisher Scientific Inc., Qiagen N.V., Bio-Rad Laboratories, Inc., F. Hoffmann-La Roche Ltd., Fluidigm Corporation, Danaher Corporation, PerkinElmer Inc., Siemens Healthcare GmbH, and Micronit Microfluidic BV

About Coherent Market Insights:

Coherent Market Insights is a prominent market research and consulting firm offering action-ready syndicated research reports, custom market analysis, consulting services, and competitive analysis through various recommendations related to emerging market trends, technologies, and potential absolute dollar opportunity.

Contact Us:

Mr. Shah
Coherent Market Insights
1001 4th Ave,
#3200
Seattle, WA 98154
Tel: +1-206-701-6702
Email: sales@coherentmarketinsights.com
Visit Coherent Market Insights Blog @ https://blog.coherentmarketinsights.com/
Connect with us on LinkedIn @ https://www.linkedin.com/company/coherent-market-insights

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Microfluidic Market - Global Industry Analysis 2025 here

News-ID: 999486 • Views:

More Releases from CMI - Research Reports

PoC Platform & Technology Market Research Study for the Period (2017 - 2025)
PoC Platform & Technology Market Research Study for the Period (2017 - 2025)
Point of care (PoC) diagnostic devices are used to obtain diagnostic results while being close to the patient and are commonly used in doctor’s office, hospitals, and in home care settings. These devices are commonly preferred in the home care settings, as they do not require technical expertise and deliver instant feedback on various medical tests. The vast applications of POC platform and technology devices include diagnosis of chronic diseases,
Low Temperature Sterilization Equipment - Market Driver, Outlook, Key Players by 2025
Low Temperature Sterilization Equipment - Market Driver, Outlook, Key Players by …
Low Temperature Sterilization Equipment Market – Advancing Sterilization Solutions Low temperature sterilization is an effective means to exercise heat and moisture sensitive surgical instrumentation, general equipment, and implant. Low temperature sterilization is used to sterilize unique devices with complex designs or those made of heat and moisture sensitive materials. This type of equipment usually include polymers on cameras, fiber optics, flexible scopes, certain plastics or recyclable invasive medical instruments made of
Low Temperature Sterilization Equipment - Market Driver, Outlook, Key Players by 2025
Low Temperature Sterilization Equipment - Market Driver, Outlook, Key Players by …
Low temperature sterilization is one of the most commonly used technique for disinfection and sterilization of equipment that are incapable to withstand high pressures and temperature in conventional sterilization techniques such as autoclave and hot air sterilization. Thus, this technique is considered to ideal for devices such as fiber optics, flexible scopes, laryngoscopes, polymers on camera, and others. The commonly used low temperature Technology type is carried out with the
Life Cell Imaging - Market Driver, Outlook, Key Players by 2025
Life Cell Imaging - Market Driver, Outlook, Key Players by 2025
The global life cell imaging industry has observed a notable growth over the last few decades due to significant increase in the demand for life cell imaging techniques for the study of cancer, neuroscience and drug discovery. Cellular imaging involves use of techniques that enable the detection and analysis of cellular organelles and macromolecules through light- or electron-based microscopes. Cell imaging is rapidly evolving as new technologies are being introduced

All 5 Releases


More Releases for Microfluidic

Microfluidic Pumps Market Research Report by 2026
(United States, Portland): The report presents an in-depth assessment of the Microfluidic Pumps Market including enabling technologies, key trends, market drivers, challenges, standardization, regulatory landscape, deployment models, operator case studies, opportunities, future roadmap, value chain, ecosystem player profiles and strategies. The report also presents forecasts for Microfluidic Pumps from 2021 till 2026. The report covers the pre COVID-19 historic data, impact of COVID-19 and post-COVID-19 (Corona Virus) impact on various regions
Global Microfluidic Components Market Growth 2019-2024
Market Research Report Store offers a latest published report on Microfluidic Components Market Analysis and Forecast 2019-2025 delivering key insights and providing a competitive advantage to clients through a detailed report. This report focuses on the key global Microfluidic Components players, to define, describe and analyze the value, market share, market competition landscape, SWOT analysis and development plans in next few years.To analyze the Microfluidic Components with respect to individual
Digital Microfluidic Devices Market
This report studies the Digital Microfluidic Devices Market status and outlook of global and major regions, from angles of players, regions, product and end Application/industries; this report analyzes the top players in global and major regions. This report presents the worldwide Digital Microfluidic Devices market size (value, production and consumption), splits the breakdown (data status 2013-2018 and forecast to 2025), by manufacturers, region, type and application. This study also analyzes the market
Global Microfluidic Market Trends and Forecast till 2025
Microfluidic devices enables the precise processing of micro liter (~0.01-10 µl) samples and allows to perform significant biological or chemical processing such as sampling, pre-processing and measurement involved in an assay within a single chip. Microfluidics aids in handling and examining very small fluid volumes, around micro- (10-6) to atto- (10-18) liter volumes of fluid, which provides several analytical and economic advantages over the conventional assays. Microfluidic devices typically requires
Microfluidic Market - Global Industry Analysis 2025
Microfluidic Market Microfluidic devices enables the precise processing of micro liter (~0.01-10 µl) samples and allows to perform significant biological or chemical processing such as sampling, pre-processing and measurement involved in an assay within a single chip. Microfluidics aids in handling and examining very small fluid volumes, around micro- (10-6) to atto- (10-18) liter volumes of fluid, which provides several analytical and economic advantages over the conventional assays. Microfluidic devices
Global Microfluidic Devices Market | MarketResearchReports.biz
Latest industry research report on: Global Microfluidic Devices Market : Industry Size, Share, Research, Reviews, Analysis, Strategies, Demand, Growth, Segmentation, Parameters, Forecasts Microfluidics is an evolving scientific field with numerous analytical applications and commercial potential. Microfluidics is an enabling technology for integration, industrialization, miniaturization and parallelization of tests in diagnostics, drug development and biological research. Microfluidic devices have several applications in the field of medicine, cell biology research and protein crystallization.