CO2 Probe Resistant to Hydrogen Peroxide
The EE871 is a high accuracy CO2 probe for demanding applications. The IP65 enclosure and replaceable filter caps make it suitable for use in harsh environments. With the new filter cap, the measuring electronics are optimally protected against hydrogen peroxide.
The CO2 infrared measuring principle (NDIR dual-wavelength technology) of the EE871 is inherently insensitive to contamination. The auto-calibration compensates for ageing effects and provides excellent long-term stability. Thanks to the multi-point CO2 and temperature adjustment, the EE871 offers a high measuring accuracy over the entire temperature range from -40 °C to 60 °C (-40...140 °F).
The measured values are optionally available on the Modbus RTU interface (up to 10,000 ppm) or the E2 interface (up to 50,000 ppm). The compact design, the electrical connection via M12 plug and the optional mounting flange facilitate quick installation and replacement of the EE871. With a radiation shield, the probe can be also installed outdoors.
The CO2 probe is additionally available as a set with a conversion board and a connection cable up to 10 m long. The conversion board features an analog output (current/voltage) as well as a Modbus RTU interface and allows easy integration into the application.
Configuration and adjustment of the probe can be performed comfortably with the optional adapter kit.
E+E Elektronik develops and manufactures sensors and transmitters for humidity, temperature, dewpoint, moisture in oil, air velocity, flow and CO2. Data loggers, hand-held measuring devices and calibration systems complete the comprehensive product portfolio of the Austrian sensor specialist. The main applications for E+E products lie in HVAC, building automation, industrial process control and the automotive industry. A certified quality management system according to ISO 9001 and ISO/TS 16949 ensures the highest quality standards. E+E Elektronik has a worldwide dealership network and representative offices in Germany, France, Italy, Korea, China and the United States. The accredited E+E calibration laboratory (OEKD) has been commissioned by the Austrian Federal Office for Metrology (BEV) to provide the national standards for humidity and air velocity.
E+E Elektronik Ges.m.b.H
T: +43 (0) 7235 605-0
F: +43 (0) 7235 605-8
Mr. Johannes Fraundorfer
T: +43 (0)7235 605-217
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release CO2 Probe Resistant to Hydrogen Peroxide here
News-ID: 907698 • Views: 191
More Releases from E+E Elektronik Ges.m.b.H
Humidity and Temperature Transmitter with Heated Sensing Probe
Continuous high relative humidity (RH) can impair the long-term stability and accuracy of humidity sensors. Therefore, the new EE211 humidity transmitter from the Austrian sensor specialist E+E Elektronik features a heated sensing probe. This leads to best accuracy and long-term stability in high-humidity (>85% RH) and even in condensing environment. The EE211 is designed for accurate humidity and temperature measurement under continuous high-humidity or condensing conditions. The device is ideal for
Digital Humidity Sensors with Integrated Contamination Protection
At the SENSOR+TEST 2016 the Austrian sensor specialist E+E Elektronik presents for the first time the new digital humidity and temperature sensors EEH110 and EEH210. The integrated E+E proprietary coating protects the sensors optimally from pollution and leads to excellent long-term stability even under harsh conditions. Several interfaces and supply voltages (3 V or 5 V) allow for easy integration of the accurate RH/T sensors in a wide range of
More Releases for CO2
Transcritical Co2 Systems Market is Booming Worldwide|
A latest survey on Global Transcritical Co2 Systems Market is conducted covering various organizations of the industry from different geographies to come up with 100+ page report. The study is a perfect mix of qualitative and quantitative information highlighting key market developments, challenges that industry and competition is facing along with gap analysis and new opportunity available and may trend in Transcritical Co2 Systems market. The report bridges the historical
New CO2 Sensor for Railway Applications
The EE8915 from E+E Elektronik meets all relevant railway standards for reliable CO2 measurement in railway vehicles, e.g. in the passenger compartment or driver's cab. On-board sensors ensure high CO2 measurement accuracy independently of temperature, altitude or weather conditions. Due to excellent measurement performance in harsh environment, the sensor is also suitable for demanding process and climate control. Long-Term Stable CO2 Measurement The E+E NDIR dual wavelength infrared measuring principle is particularly
Digital CO2, Humidity and Temperature Sensor
The EE850 duct mount sensor from E+E Elektronik combines the CO2, relative humidity (RH) and temperature (T) measurement in a single device. The sensor can be easily integrated into a bus system via the RS485 interface (Modbus RTU or BACnet MS/TP). The 3-in-1 device is dedicated for building automation as well as for demanding process control. The EE850 features the E+E dual wavelength NDIR CO2 sensing cell, which is particularly insensitive
Global Beer CO2 Regulator Market | 2018 Key Vendors: Taprite, Titan Controls, Pr …
Qyresearchreports include new market research report “Global Beer CO2 Regulator Market Research Report 2018” to its huge collection of research reports. This report on the global Beer CO2 Regulator market is based upon thorough study conducted by some of the professional and expert analysts of the industry. This report emphasizes on several factors including government regulations that are influencing growth of the market positively or negatively. The report explains challenges, opportunities,
“Ukrainska Molochna Kompania” sold CO2 emission quotas
On February the 3-rd “Ukrainska Molochna Kompania” (UMK) sold CO2 emission quotas for 2010. The company added to its earnings over 100 thousand Euros “out of thin air.” A dairy farm in Krupile village(Kiev region), owned by the UMK, built its biogas plant in 2008 to process production wastes for latter production of electricity. Construction works for the biogas plant were conducted by “Zorg Biogas Ukraine” - Ukrainian subsidiary of Zorg
Messer commissions largest CO2 recovery plant
In Belgium, industrial gases specialist Messer recovers 150,000 tons of CO2 a year from industrial waste gas in order to recycle it. Industrial gases specialist Messer has commissioned a new CO2 liquefaction plant with an annual production capacity of 150,000 tons of carbon dioxide on the site of the British company Ineos Oxide in Zwijndrecht near Antwerp, Belgium. The Messer Group has operations in Europe and Asia, and this is its