openPR Logo
Press release

Energy saving full redundant solution for a TierIV Data Center in Milan

01-15-2018 05:16 PM CET | IT, New Media & Software

Press release from: MEHITS

/ PR Agency:
data center

data center

The customer: WIIT
Mitsubishi Electric Hydronics & IT Cooling Systems, through its brand RC has supplied the HPAC units for the WIIT Data Center in Milan. WIIT is an Italian company focused on Private and Hybrid Cloud continuative services, and is one of the main players in Europe and Worldwide, specialized in application management and critical applications such as disaster recovery and business continuity.
WIIT owns three data centers in Italy. Today WIIT is the first and unique Italian Provider with the maximum quality level both for its technological infrastructure and for its services supplier capacity (6 SAP certifications). These certifications probe the presence of multiple and independent systems for power and cooling and the capacity to resist to a failure or prolonged power losses.

The Project: the new Data Center in Milan
The Milan Data Center has a surface of 550 square meters. It is the company’s primary Data Center where the most complex ERP (Enterprise Resource Planning) infrastructure is located and managed. The structure has achieved the Tier IV certification from the Uptime Institute.

TIER IV certification
As a Tier IV certificated structure, the WIIT data center is fault tolerant, which means that failures of individual equipment or a general black-out doesn’t produce any operation suspension. This structure can cope with extraordinary maintenance and major technical accidents on any equipment without ever interrupting its operation.

The RC solution: reliability and high efficiency
RC’s solution has supplied a high energy saving full redundant cooling system for this TIER IV certified Data Center.

Going in detail 10 NEXT EVO INV DX U and 18 remote condensers TEAM MATE STD have been installed. Aimed at optimizing energy costs, NEXT LEGACY range makes use of EC PUL (Polymeric Ultralight) fans made of composite material. Premium energy efficiency levels are achieved by the accurate management of the fan parameters such as flow rate, power and pressure. The result is the best system operation in any working condition.
Furthermore, the INVERTER technology on the compressor regulates the power capacity according to the real requirements of the servers. The unit performance at partial loads is optimized, rapidly increasing its efficiency and reducing its consumption.
NEXT EVO INV DX U direct expansion precision air conditioners equipped with BLDC inverter scroll compressor matched with TEAM MATE remote air cooled condensers represent a perfect example of reliability and efficiency. The use of direct free cooling increases furthermore the efficiency of the system.

Reliability in IT Cooling
Today there are only 42 Data Centers throughout the world, that have been Tier IV Constructed Facility certified, and only 18 of these structures are located in Europe.
In Italy, there are 6 data centers that have obtained Tier IV certification and Mitsubishi Electric Hydronics & IT Cooling Systems is the supplier of the cooling systems in 4 of these: Telecom Italia Acilia, Fastweb Milano, and Unipol Pilastro with Climaveneta units and Wiit Spa Milano with RC units, demonstrating the high reliability of its IT Cooling solutions.

Follow RC:,

Media Relations:
Sara Di Clemente

Mitsubishi Electric Hydronics & IT Cooling Systems S.p.A. is Mitsubishi Electric Company specialized hydronic systems for air conditioning and heating and in IT cooling solutions.

Mitsubishi Electric Hydronics & IT Cooling Systems S.p.A. designs, produces and markets innovative, energy efficient products and provides value added services for Indoor Climate Control in commercial buildings and for Refrigeration (ICC&R) of industrial processes and ICT applications through CLIMAVENETA and RC.

Mitsubishi Electric Hydronics & IT Cooling Systems S.p.A.
via Valsugana 98 - 36022 Cassola (VI)

This release was published on openPR.

Permanent link to this press release:

Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Energy saving full redundant solution for a TierIV Data Center in Milan here

News-ID: 900481 • Views: 693

More Releases from MEHITS

An intelligent factory
The company Barberini, founded by Pietro Barberini in 1963, today is the world leader for production of optical glass solar lenses, with exclusive and sophisticated technical features, used by various luxury brands. The company controls the entire production chain, from the raw materials to the finished lenses, with cutting-edge industrial sites in Italy, a glass melting plant in Germany, and advanced technologies to produce polarizing lenses for sunglasses. In Italy, Barberini
Where sustainability matters
The green revolution in Uruguay Uruguay is a country of almost 3 and a half million inhabitants that has no oil reserves and that until just over 10 years ago imported oil from neighbouring countries. Thanks to the green energy policy launched in 2000, and today, the country produces 97% of the total electricity from renewable sources: solar, hydroelectric, wind, and biomass. A true revolution, the result of a well-structured
Bayernland: fully air-conditioned wharehouse in Verona
Bayernland, founded in Vipiteno in 1970, produces and distributes high quality dairy products throughout Italy. In order to guarantee freshness to the final customer, it has become necessary to create a modern distribution system capable of delivering dairy products quickly and efficiently. For this reason, Bayernland recently opened a new logistics center in the Europa neighborhood of Verona, which will support with the new Vipiteno office inaugurated just 4 years
From mechanical garage to modern culture workshop
The new OGR The new Officine Grandi Riparazioni in Turin reopened its doors last autumn after 1,000 days of construction. Fondazione CRT invested 100 million euros for the rebirth of the entire industrial complex, including the majestic H-shaped building of about 20,000 square meters, the office buildings and all the open-air areas for a total of 35,000 square meters. The real estate development enriches and completes the new urban renewal

All 5 Releases

More Releases for Cooling

Engine Cooling Fan Controller Market
This report presents the worldwide Engine Cooling Fan Controller market size (value, production and consumption), splits the breakdown (data status 2013-2018 and forecast to 2025), by manufacturers, region, type and application. This study also analyzes the market status, market share, growth rate, future trends, market drivers, opportunities and challenges, risks and entry barriers, sales channels, distributors and Porter’s Five Forces Analysis. Download FREE Sample of this Report @ The Engine Cooling
Cooling Towers Market - Cooling Towers Market Global Research Report 2022
In this report, the global Cooling Towers market is valued at USD XX million in 2016 and is expected to reach USD XX million by the end of 2022, growing at a CAGR of XX% between 2016 and 2022. Geographically, this report is segmented into several key Regions, with production, consumption, revenue (million USD), market share and growth rate of Cooling Towers in these regions, from 2012 to 2022 (forecast), covering North
Turbine Inlet Cooling Systems
Transparency Market Research has released a new market report titled Turbine Inlet Cooling Systems Market by Technology - Global Industry Analysis, Size, Share, Growth, Trends and Forecast, 2014 - 2022. According to this report, the global turbine inlet cooling systems market stood at US$7.8 bn in 2013 and is anticipated to surpass US$13.1 bn by 2022, at a CAGR of 6% from 2014 to 2022. The report on
buzcelik cooling system
As one of the leading suppliers in the field of cooling technologies in Turkey, Buzcelik commenced the production activities by manufacturing industrial type refrigerators in 1982. Buzcelik intensified the activities on finned tubular heat exchangers and it has been located itself between pioneers of cooling industry in course of time by specializing the procurement process in manufacturing of; Commercial and Industrial Type Air Cooled Condensers,
Plum Heating and Cooling Offers New and Enhanced Cooling Systems
Plum Heating and Cooling is one of the most popular heating and cooling solution providers in Melbourne, Australia. The company is one of the fastest growing services in the region and is known for its top of the line customer services. This heating and cooling solution provider has earned the reputation of providing the most technologically advanced cooling systems from well known brands like Braemar & Lennox. The Add-on Cooling
District Cooling Is The Future Of Cooling
At current levels, 70 percent of annual peak electricity consumption is used by air conditioning units to meet the cooling demands in Saudi Arabia and the demand is expected to nearly triple by 2030. It is expected that by year 2030, 1.5 million barrels of oil per day will be needed to power air-conditioning units. Prudent developers and authorities are turning to District Cooling (DC) technology as it has proven,