openPR Logo
Press release

Automotive Belts Market to Remain Lucrative During 2016-2026

01-05-2018 02:00 PM CET | Business, Economy, Finances, Banking & Insurance

Press release from: Future Market Insights

Automotive Belts Market to Remain Lucrative During 2016-2026

Automotive Belts are power transmission belts that provide a connective link between two parallel rotating shafts, these shafts are fixed with pulleys upon which the belt is looped. Hence, power transmission occurs by friction from the driving shaft to the driven shaft smoothly through these belts. Automotive belts are also utilized as timing belts to synchronize the functions of engine valves via a camshaft. Automotive belts used in vehicles are designed as endless belts and are commonly manufactured from materials such as neoprene, chloroprene, and ethylene propylene diene monomer rubber (EPDM rubber). The inner surface and the cross sectional area of the automotive belt differs according to the function the belt needs to perform. Automotive functions such as air-conditioning, power steering function, water pump function and drive alternator are performed by the V-belt while valve timings through the camshaft is usually performed by the toothed belt. Serpentine belts are newer form of automotive belts where all the automotive functions, collectively known as engine accessories, are performed by the connections through a shaft and pulley system is done by a long single endless belt. This form of belt negates the usage of multiple V-belts in an automotive engine.

A sample of this report is available upon request @ https://www.futuremarketinsights.com/reports/sample/rep-gb-1785

Automotive Belts Market Dynamics

The Production numbers of automobile worldwide is on a constant increase on a yearly basis as per the demands witnessed in many developing countries. This factor is the prime reason for fueling the growth of the automotive belts market. Automotive belts primarily function through friction between the pulley and the belt which is susceptible to wear and tear due to continuous usage leading to decreased performance, engine efficiency and slippage. This problem is usually rectified by the replacement of the belt prompting the growth of the automotive belt market in the aftermarket segment as well. The influence of the Environmental Protection Agency to reduce greenhouse gases emission and control of pollution has pushed the automotive vehicles manufacturers to produce highly efficient and less polluting engines that require very precise and long lasting automotive belt. This factor has also fueled the growth of automotive belts market as more and more vehicle manufacturers opt for belts that are efficient and environmental friendly.

Automotive Belts Market: Segmentation

Automotive Belts Market can be segmented by vehicle type, sales channel and type.

By vehicle type, automotive belts can be segmented as:

Passenger vehicles

Light Commercial vehicles

Heavy Commercial vehicles

By sales channel, it can be segmented as:

Original Equipment Manufacturer

Aftermarket

By type, it can be segmented as:

Timing Belts

Drive Belts

Single V-Belt

Multi-function V-Belt/Serpentine Belt

Automotive Belts Market: Regional Outlook

The Global Automotive Belts market can be segmented into seven distinct geographical divisions such as North America, Latin America, Western and Eastern Europe, Asia-Pacific Excl. Japan (APEJ), Japan, Middle East and Africa. Developing countries in Latin America and the Asia Pacific region such as Mexico, China and India witnessed the fastest growth of automobile production and sales which can further fuel the improvement of automotive belts market. In APEJ region China, South Korea, and India are the top automobile producing countries making them prominent market for automotive belts. In the North American region U.S. is anticipated to show high growth of automotive belts market owing to improved production of automobiles. Western Europe is exhibited to show a prominent growth of automotive production especially in countries such as Germany, Spain, France, U.K., and Italy hence enhancing the market for automotive belts in Western Europe. The increasing trend of reselling automobiles in the Middle East and Africa region has prompted an improvement in the demand for automotive belts, thereby improving the market in the aftermarket segment.

To view TOC of this report is available upon request @ https://www.futuremarketinsights.com/toc/rep-gb-1785

Automotive Belts Market: Key Players

Some of the major players identified in the Global Automotive Belts Market are

Gates Corporation

Midas International Corporation

Mitsuboshi Belting Ltd. Group

Helicord Transmissions Pvt. Ltd.

B&B Manufacturing

The Carlstar Group LLC

Continental AG

Bearings and Power Transmission Solutions

CRP Industries Inc.

BG Automotive

Hutchinson Group

Bando Chemical Industries Ltd.

The research report presents a comprehensive assessment of the market and contains thoughtful insights, facts, historical data, and statistically supported and industry-validated market data. It also contains projections using a suitable set of assumptions and methodologies. The research report provides analysis and information according to categories such as market segments, geographies, types and applications.

ABOUT US:
Future Market Insights (FMI) is a leading market intelligence and consulting firm. We deliver syndicated research reports, custom research reports and consulting services, which are personalized in nature. FMI delivers a complete packaged solution, which combines current market intelligence, statistical anecdotes, technology inputs, valuable growth insights, an aerial view of the competitive framework, and future market trends.

CONTACT:
Abhishek Budholiya
Future Market Insights
616 Corporate Way, Suite 2-9018,
Valley Cottage, NY 10989,
United States
T: +1-347-918-3531
F: +1-845-579-5705
Email: sales@futuremarketinsights.com
Website: http://www.futuremarketinsights.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Automotive Belts Market to Remain Lucrative During 2016-2026 here

News-ID: 887368 • Views: 457

More Releases from Future Market Insights

How Changing Dynamics of Cable Testing Market are Reflecting on Growth Strategie …
Global Cable Testing Market: Introduction The cost of the substitution of cables that are concealed is very high. Faults in the cable, bending, kinking, and crushing, are not always visible, which has created the requirement for cable testing. Thus, cable testing helps check the cable functionality, cable quality, and cable conformity. Several times, cable testing by visual inspection is an effective way of identifying the actual problem before it causes any
How Transformative Trends in Self-Organising Network Market are Molding Strategi …
Self-Organising Network: Introduction With accelerated advancements and increasing complexities in the radio network technologies, such as those utilised for the development of LTE and 5G networks, which are used for planning, management, configuration, healing and optimisation, are required to be automated to facilitate efficiency. At present, suppliers are offering self-organising networks that possess the ability to offer optimum performance. Self-organising networks are use cases that perform network governance, including network planning,
Mining Vehicle AC Kits Market: Exploring the Impact of Trends on Strategies of K …
Mining Vehicle AC Kits Market: Introduction Cabin space in mining equipment has become more sophisticated in the recent past. The installation of mining vehicle AC kits has evolved from an optional feature to a necessary feature. Mining equipment manufacturers have made advancements in technology related to efficiency, performance and cost of air conditioning systems in order to make them affordable and economical to enable low-budget and compact installations without compromising on
Key Factors to Fuel Growth of the Talent Acquisition & Staffing Technology and S …
With the growing importance of recruiting and retaining top talent effectively and efficiently, smart hiring processes are the need of the hour. It is about time organisations move beyond merely scrutinising resumes. Salaries and benefits are important factors, but adopting ways that would make candidates an important part of the hiring process will attract the best talent. Studies reveal that due to discrepancies in existing Applicant Tracking Systems (ATS), hiring

All 5 Releases


More Releases for Automotive

Automotive Sunroof Market
Automotive Sunroof is a fixed or operable opening in vehicle that allows light or fresh air to enter inside a car. Sunroof are of many shapes and sizes and styles and they are either manually driver or motor driven. Increasing demand for premium cars and growing need to control light inside the vehicle is fueling the growth of automotive sunroof market. The major driver influencing the growth of automotive sunroof is
Automotive MEMS Sensor
The Insight Partners added “Laser Technology Market to 2025” to its research database. The report is spread across 150 pages and supported by 10 company leaders. A laser is a coherent and focused beam of photons; coherent, in this context, means that it is all one wavelength, unlike ordinary light which showers on us in many wavelengths. Laser technology is used for an extensive range of professional field measurement applications which
Automotive Air Filter Market
An automotive air filter is a device that is made up of fibrous materials that removes solid particulates like pollen, dust, bacteria, and mould from the intake air. A chemical type of air filter consist of a catalyst or absorbent for removing molecular contaminants like ozone or volatile organic compounds. Air filters are being used in applications where air quality is of vital importance, notably in building ventilation systems and
Automotive Fasteners Market
Fasteners are the mechanical components that holds, joins or affixes two or more parts together, automotive industry is the largest market for the fastener. Automotive fasteners are made up of various materials such as Iron, Aluminum, Brass, Nickel, Stainless steel, Plastic, they are further classified with their distinct characteristics. Automotive fasteners are generally used for the clamping parts of vehicle together to avoid their separation or wobbling, transmitting loads as
Automotive Tires Market
The automotive tires play a very important role in vehicle performance along with the vehicle engine. A tire should be fine enough to carry vehicle weight and pressure on any road with superior breaking performances. The manufacturers focus on enhancing the production and performance capabilities of tires to meet with the growing demands of OEMs as well as secondary market.The automotive tires market is expected to grow rapidly in the
Automotive Actuators Market 2017 - AK, FTE automotive
MarketReports.biz’s Automotive Actuators market research report provides the newest industry data and industry future trends, allowing you to identify the products and end users driving Revenue growth and profitability. The industry report lists the leading competitors and provides the insights strategic industry Analysis of the key factors influencing the market. Request for sample @ https://goo.gl/auN0LC The Players mentioned in our report AK FTE automotive The report includes the forecasts, Analysis and discussion of important industry trends,