Macroeconomic and Microeconomic Oxy-fuel Welding Equipment Market Analysis by Future Market Insights 2017 – 2027
Oxy-fuel Welding Equipment Market Dynamics
Though oxy-fuel welding technique has limited application in industrial scale operation, its utilization in repair and fabrication industry is the most prominent. Small scale repair shops run by a single or few welders typically adopt oxy-fuel welding technique due to lower investment costs and ability to weld large variety of materials has increased its popularity hence biding well for the growth of the oxy-fuel welding equipment market. Oxy-fuel welding technique is the least complex among all the welding techniques requiring minimum set up operation. This technique requires the assembly of simple devices such as fuel tank, torch, mixing chambers among others hence, in-depth know how of such techniques is not necessary making it practically useful for people who are new to welding. The non-requirement of electricity in order to initiate the welding process is another factor helping in driving the oxy-fuel welding equipment market even further.
Request For Report Sample@ https://www.futuremarketinsights.com/reports/sample/rep-gb-5120
The growth of oxy-fuel welding equipment market is likely to be restrained by the erratic availability of fuels adopted in this technique. Oxygen and acetylene are the two most popular fuels along with hydrogen used as the power source to generate the welding flame in this welding technique. Inadequate supply of such fuels can lead to increase in its prices which can further lead to decrease in demand for oxy-fuel welding equipment thereby retraining the market to improve in the upcoming years. Another restraint associated with the market is the fragility of entire assembly and the dangers associated with pressurized gases that are used with it. Last but not the least, the weld quality produced from this technique is on the lower scale among all the welding processes hence requiring skilled personnel to achieve a weld of desirable quality, thereby retraining the growth of the market.
Oxy-fuel Welding EquipmentMarket: Segmentation
Oxy-fuel Welding EquipmentMarket can be segmented as follows;
By Process type, the market can be segmented as:
Pressure Gas Welding
By End Use Industry, the market can be segmented as:
Energy & Utilities
Maintenance and Repair
Oxy-fuel Welding EquipmentMarket: Regional Outlook
The oxy-fuel welding equipment market can be related to the performance of the end use industry in each of the seven geographical locations across the globe. The North American market is anticipated to hold a healthy potential for the growth of the market owing to increase in fabrication and repair activities across the region especially in the U.S. The presence of large number of retailers and specialist sellers of oxy-fuel welding equipment is expected to aid in the growth of the market even further. The market in the Asia Pacific region also holds high potential to improve further in the future owing to large presence of small scale welding workshops that rely on cheaper welding options, particularly in China, ASEAN and India
Visit For TOC@ https://www.futuremarketinsights.com/toc/rep-gb-5120
Oxy-fuel Welding Equipment Market: Market Participants
Examples of some of the major players in the Global Oxy-fuel Welding Equipment market, identified across the value chain include:
Illinois Tool Works Inc.
Koike Aronson, Inc.
The Eastwood Company
American Torch Tip Company
Quality Components Co. Inc.
Rexarc International, Inc.
Detroit Torch & Mfg. Co.
Flame Technologies, Inc.
Uniweld Products, Inc.
Future Market Insights (FMI) is a leading market intelligence and consulting firm. We deliver syndicated research reports, custom research reports and consulting services, which are personalized in nature. FMI delivers a complete packaged solution, which combines current market intelligence, statistical anecdotes, technology inputs, valuable growth insights, an aerial view of the competitive framework, and future market trends.
Future Market Insights
616 Corporate Way, Suite 2-9018,
Valley Cottage, NY 10989,
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Macroeconomic and Microeconomic Oxy-fuel Welding Equipment Market Analysis by Future Market Insights 2017 – 2027 here
News-ID: 846190 • Views: 113
More Releases from Future Market Insights
How Changing Dynamics of Cable Testing Market are Reflecting on Growth Strategie …
Global Cable Testing Market: Introduction The cost of the substitution of cables that are concealed is very high. Faults in the cable, bending, kinking, and crushing, are not always visible, which has created the requirement for cable testing. Thus, cable testing helps check the cable functionality, cable quality, and cable conformity. Several times, cable testing by visual inspection is an effective way of identifying the actual problem before it causes any
How Transformative Trends in Self-Organising Network Market are Molding Strategi …
Self-Organising Network: Introduction With accelerated advancements and increasing complexities in the radio network technologies, such as those utilised for the development of LTE and 5G networks, which are used for planning, management, configuration, healing and optimisation, are required to be automated to facilitate efficiency. At present, suppliers are offering self-organising networks that possess the ability to offer optimum performance. Self-organising networks are use cases that perform network governance, including network planning,
Mining Vehicle AC Kits Market: Exploring the Impact of Trends on Strategies of K …
Mining Vehicle AC Kits Market: Introduction Cabin space in mining equipment has become more sophisticated in the recent past. The installation of mining vehicle AC kits has evolved from an optional feature to a necessary feature. Mining equipment manufacturers have made advancements in technology related to efficiency, performance and cost of air conditioning systems in order to make them affordable and economical to enable low-budget and compact installations without compromising on
Key Factors to Fuel Growth of the Talent Acquisition & Staffing Technology and S …
With the growing importance of recruiting and retaining top talent effectively and efficiently, smart hiring processes are the need of the hour. It is about time organisations move beyond merely scrutinising resumes. Salaries and benefits are important factors, but adopting ways that would make candidates an important part of the hiring process will attract the best talent. Studies reveal that due to discrepancies in existing Applicant Tracking Systems (ATS), hiring
More Releases for Welding
Welding Equipment Market 2024
Flourishing automobiles and construction industries are cropping up owing to rapid industrialization worldwide. With rapid development in various companies, various countries have increasingly adopted welding technology such as resistance welding, oxy-fuel welding, and laser welding. For various industries such as transport industry, fabric industry and automotive segment, welding is an imperative procedure. With the ever changing technology breaking traditional barriers, welding equipment Market market has further witnessed development for application in
Classification of Welding Methods
Spiral welded steel pipe according to the welding method can be divided into different arc welding pipe, high frequency or low frequency resistance welded pipe, gas pipe, furnace pipe, Bundy tube. Welded steel pipe: for oil drilling and machinery manufacturing industry. Welded pipe: can be used as water and gas pipes, large diameter straight seam welded pipe for high pressure oil and gas transportation; spiral welded pipe for oil and gas transportation,
Global Welding Equipment Market: Arc welding, Resistant welding, Oxy fuel weldin …
MarketResearchReports.Biz adds “Global Welding Equipment Market 2016 Share, Size, Trends and Forecast to 2021 Market Research Report” reports to its database. This report provides a strategic analysis of the Welding Equipment market and the growth estimates for the forecasted period. A comprehensive research report created through extensive primary research (inputs from industry experts, companies, stakeholders) and secondary research, the report aims to present the analysis of global welding equipment market on
Global Welding Robotics Market
Welding robotics is a technology which provides automated welding robots to serve during designing and manufacturing processes. Welding robots have offered a viable solution to achieve mass production by decreasing the manufacturing cycle time. Moreover, benefits such as repeatability and accuracy have led to the increasing applications of welding robots in several end-use industries. On account of its precision and repetitiveness, welding robots are widely used in automotive sector where
Resistance Welding Machine Market By Welding Technology, Arc Welding Segment
bigmarketresearch.com announces addition of new report “Resistance Welding Machine Market 2016-2021” to its database. Download Sample Copy: http://bit.ly/2fD9PjM This report focuses on the Resistance Welding Machine in Global market, especially in North America, Europe and Asia-Pacific, Latin America, Middle East and Africa. This report categorizes the market based on manufacturers, regions, type and application. Resistance welding is a welding technology widely used in manufacturing industry for joining metal sheets and components.
Welding Consumables Market:
Welding is typically a sculptural process of joining various metals and thermoplastics together by means of coalescence. It is an economical and effective process for creating strong joints between two or more parts. Filler metals melt during the course of welding and give a strong joint. Flux is commonly used to produce a shield of gas around the weld pool for preventing the oxidation of hot metals. Flux typically acts