Press release
E-Scrap and Printed Circuit Board (PCB) E-Scrap Market: Household Appliances Likely to Remain Dominant Source of E-scrap
The report forecasts the volume in the global market for e-scrap to expand at a CAGR of 5.6% during the period from 2016 to 2026. The global printed circuit board (PCB) e-scrap market, on the other hand, was about 1.46 million tons in 2015 and is forecasted to reach 3.14 million tons by 2026, by rising at a CAGR of 7.3% from 2016 to 2026. The global e-scrap market was valued at 43.7 million tons and US$55.34 bn in 2015.
Fill the form to gain deeper insights on this market @ https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=18173
The global market for e-scrap and printed circuit board (PCB) has been divided based on different parameters. Based on the source of e-scrap, the key segments of the market are household appliances, entertainment devices, IT and telecommunication products, etc. Among them, the e-waste produced from household appliances held maximum share – about 45% – in the market, in 2015. In addition, the segment is predicted to grow at a healthy clip in the near future on account of the high usage of various types of electronic equipment in household application in terms of units.
From a geographic standpoint, Asia Pacific is the dominant market for e-scrap and PCB e-scrap. It held about 40% share in the overall e-scrap market’s volume and value in 2015. The region is also slated to outshine all other regions in terms of growth in the forecast period, powered primarily by the countries of China, India, South Korea, and Japan.
Rising Usage of Electronic Products Drives Market
At the forefront of driving growth in the global e-scrap and PCB e-scrap market are growing number of electronic products in urban households on account of the increasing urban incomes. They generate maximum e-waste from which recovery of different metals is crucial in order to save energy. In addition, recycling of e-waste also serves to bring down the burden on the mining industry hard-pressed to provide primary metals.
Obtain Report Details @ https://www.transparencymarketresearch.com/e-scrap-printed-circuit-board-e-scrap-market.html
“Sustainable resource management entails segregation of hazardous resources from e-waste and the maximum recovery of precious metals. Thus, the recycling of e-waste helps bring down pollution, conserve energy, reduce greenhouse gas emissions, and conserve resources by requiring fewer raw materials from the earth’s crust. Further, the rising focus on recycling unprocessed waste is predicted to generate opportunities for growth for smelters for e-waste recycling,” explains the lead analyst of the report.
Growing Application of Copper in Construction Industry Proves Beneficial to Market
The abundant use of copper in the construction and telecommunication industry and in the installation of electric grids is likely to drive the demand for e-scrap and Printed Circuit Board (PCB) e-scrap recycling in the next couple of years. The swift pace of urbanization in developing Asia Pacific economies, which represent the major regional markets for e-scrap and PCB e-scrap market players, could thus be vital for the market in the upcoming years.
On the flipside, however, the dearth of awareness about the dangers of e-scrap and the utility of recycling could deter the e-scrap market in developing regions in the next couple of years.
About TMR
Transparency Market Research (TMR) is a global market intelligence company providing business information reports and services. The company’s exclusive blend of quantitative forecasting and trend analysis provides forward-looking insight for thousands of decision makers. TMR’s experienced team of analysts, researchers, and consultants use proprietary data sources and various tools and techniques to gather and analyze information.
Contact TMR
90 State Street, Suite 700
Albany, NY 12207
Tel: +1-518-618-1030
USA - Canada Toll Free: 866-552-3453
Email: sales@transparencymarketresearch.com
Website: https://www.transparencymarketresearch.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release E-Scrap and Printed Circuit Board (PCB) E-Scrap Market: Household Appliances Likely to Remain Dominant Source of E-scrap here
News-ID: 833057 • Views: …
More Releases from Transparency Market Research
Photo-rechargeable Battery Industry Set to Exceed USD 399.2 Mn by 2031, Driven b …
The global photo-rechargeable batteries market, valued at US$ 90.0 million in 2022, is poised for robust expansion. With an anticipated CAGR of 18.9% from 2023 to 2031, the market is projected to reach US$ 399.2 million by the end of 2031. Growth is primarily driven by rising demand for sustainable energy solutions, increased adoption of consumer electronics and wearable devices, and ongoing technological innovations in solar rechargeable battery technologies.
Uncover essential…
Energy Recovery Technologies Industry Projected to Grow at 6.1% CAGR, Reaching U …
The global energy recovery technologies market, valued at US$ 33.1 billion in 2022, is set to grow at a CAGR of 6.1% from 2023 to 2031, reaching US$ 53.2 billion by the end of 2031. Rising demand for energy-efficient solutions, increasing energy costs, and heightened awareness about climate change are driving market growth as industries seek to reduce their carbon footprints by recovering waste heat and converting it into usable…
Coin Cells Market Projected to Reach USD 5.9 Bn by 2031 with 4.5% CAGR - Transpa …
The global coin cells market, valued at US$ 4.0 billion in 2022, is set for steady growth over the forecast period. With an anticipated CAGR of 4.5% from 2023 to 2031, the market is projected to reach US$ 5.9 billion by the end of 2031. This growth is driven by the increasing demand for compact and long-lasting power sources for wearable IoT devices, portable electronics, and renewable energy storage applications.
Uncover…
Printed Battery Market to Reach USD 1.8 Billion by 2031, Growing at an Impressiv …
The global printed battery market, valued at US$ 166.0 million in 2022, is expected to experience remarkable growth over the forecast period. With an estimated CAGR of 30.1% from 2023 to 2031, the market is projected to reach US$ 1.8 billion by the end of 2031. This growth is primarily driven by the rising adoption of IoT devices and the increasing demand for wearable and flexible electronics, which are fueling…
More Releases for PCB
PTFE PCB (Teflon PCB) Market 2022:Key Market Insights, Drivers And Restraints, O …
QY Research has recently published a new report, titled Global PTFE PCB (Teflon PCB) Market Research Report 2022. The report has been put together using primary and secondary research methodologies, which offer an accurate and precise understanding of the PTFE PCB (Teflon PCB) market. Analysts have used a top-down and bottom-up approach to evaluate the segments and provide a fair assessment of their impact on the global PTFE PCB (Teflon…
Automotive PCB Relays Market Forecast Report on Automotive PCB Relays Market 202 …
The report published on the global Automotive PCB Relays market is a comprehensive analysis of a variety of factors that are prevalent in the Automotive PCB Relays market. An industrial overview of the global market is provided along with the market growth hoped to be achieved with the products that are sold. Major companies who occupy a large market share and the different products sold by them in the global market are…
PCB Laminate Market 2028 | Ibiden Co., Ltd., Nan Ya PCB Co., Ltd., Shenzhen Kinw …
Electronic systems have undergone tremendous transformation over the years on the coattails of rising demand for improved performance and better functionality in these systems. Today, printed circuit boards (PCBs) have become the foundation of majority of electronic products and their applications continue to grow well. PCBs have conductive pathways etched with copper sheets which are laminated to ensure that they do not conduct a signal or current.
Get Sample Copy of…
PCB Laminate Market | Ibiden Co., Ltd., Nan Ya PCB Co., Ltd., Shenzhen Kinwong E …
Electronic systems have undergone tremendous transformation over the years on the coattails of rising demand for improved performance and better functionality in these systems. Today, printed circuit boards (PCBs) have become the foundation of majority of electronic products and their applications continue to grow well. PCBs have conductive pathways etched with copper sheets which are laminated to ensure that they do not conduct a signal or current.
Get Brochure of the…
The maestros amongst PCB separators
- cab from May 7 to 9, 2019, on-site at the SMTconnect in Nuremberg displays solutions for PCB separation and transport, laser marking, label printing and labeling.
Precise separation
In the field of PCB separation, devices of the MAESTRO series cut pre-scored PCB of different lengths and materials. Only 33 cm in height, 20 cm in width and 62 cm in depth, the compact MAESTRO 2M requires little footprint. A motor…
Global PCB & PCBA Market 2017 - Ibiden, ZDT, Tripod, TTM, SEI, Viasystems, Nanya …
This report studies PCB & PCBA in Global market, especially in North America, China, Europe, Southeast Asia, Japan and India, with production, revenue, consumption, import and export in these regions, from 2012 to 2016, and forecast to 2022.
This report focuses on top manufacturers in global market, with production, price, revenue and market share for each manufacturer, covering
Nippon Mektron
Unimicron
SEMCO
Young Poong Group
Ibiden
ZDT
By types, the market can be split into
Rigid 1-2Sided
Standard Multilayer
HDI
IC Substrate
Flexible…
