Press release
Flow Meter Identifies Potential Savings in Compressed Air Supply
The EE741 flow meter measures and monitors the compressed air consumption with high accuracy.
For pipe diameters DN15 to DN50
The modular EE741 consists of the transmitter unit with flow sensor and a stainless steel or aluminum gauge mounting block. The mounting blocks are available for DN15 (1/2”), DN20 (3/4”), DN25 (1”) and now also for DN32 (1 1/4”), DN40 (1 1/2”), DN50 (2”) pipes.
The gauge mounting block enables easy and reproducible positioning of the transmitter in pipes with an operating pressure up to 16 bar (232 psi). Outstanding measuring accuracy, even in the lower measuring range, is achieved by the application-specific multi-point factory adjustment at 7 bar (102 psi). This allows precise leak detection and the consequent energy savings. The EE741 features an integrated consumption meter for cost-effective consumption monitoring without an additional data logger.
Easy installation and removal
Once the gauge mounting block is built into the pipeline, the transmitter can be easily removed and installed without disassembling the pipework. This is particularly useful for periodical calibration. Besides, one transmitter can be used for temporary measurements at several gauge mounting blocks. The sealing plug included in the scope of supply enables the operation of the compressed air system when the transmitter unit is removed. The robust stainless steel sensing head protects the sensing element against mechanical damage during installation or removal.
Highly accurate thermal measuring principle
The EE741 works on the thermal hot-film anemometer principle. The E+E thin-film sensing element stands out by excellent long-term stability and short response time. The measuring principle is largely insensitive to contamination and eliminates the need for additional pressure or temperature compensation. The EE741 also measures the standard volume flow, mass flow, standard flow and temperature of non-corrosive gases such as nitrogen, oxygen, helium, CO2 or argon.
Comfortable operation via display
The optional display shows the actual measured data as well as the total consumption. The entire device setup can be performed with the display and the push buttons. For optimum readability the display alignment can be rotated in 90° increments. An EE741 without display can be configured via USB service interface using the free EE-PCS product configuration software.
Several output options
The EE741 features two outputs, which can be configured for analogue, pulse or alarm signals. Optionally, the flow meter is available with a Modbus RTU or M-Bus interface.
E+E Elektronik develops and manufactures sensors and transmitters for humidity, temperature, dewpoint, moisture in oil, air velocity, flow and CO2. Data loggers, hand-held measuring devices and calibration systems complete the comprehensive product portfolio of the Austrian sensor specialist. The main applications for E+E products lie in HVAC, building automation, industrial process control and the automotive industry. A certified quality management system according to ISO 9001 and ISO/TS 16949 ensures the highest quality standards. E+E Elektronik has a worldwide dealership network and representative offices in Germany, France, Italy, Korea, China and the United States. The accredited E+E calibration laboratory (OEKD) has been commissioned by the Austrian Federal Office for Metrology (BEV) to provide the national standards for humidity and air velocity.
E+E Elektronik Ges.m.b.H
Langwiesen 7
4209 Engerwitzdorf
Austria
T: +43 (0) 7235 605-0
F: +43 (0) 7235 605-8
info@epluse.at
www.epluse.com
Press contact:
Mr. Johannes Fraundorfer
T: +43 (0)7235 605-217
pr@epluse.at
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Flow Meter Identifies Potential Savings in Compressed Air Supply here
News-ID: 783779 • Views: …
More Releases from E+E Elektronik Ges.m.b.H.
Miniature Sensor Module Measures CO2, Temperature and Pressure
The new EE895 sensor module from E+E Elektronik measures CO2, temperature and ambient pressure. The small 3-in-1 module is an ideal choice for measuring instruments used for ventilation and climate control, in building automation or for process control. Due to its low power consumption, the module is also suitable for battery-operated devices such as hand-held meters, data loggers or wireless transmitters. The temperature and pressure compensation ensures high CO2 measurement…
Humidity and Temperature Probe with Digital Interface
The EE072 by E+E Elektronik is a highly accurate humidity and temperature probe for demanding process and climate control tasks. The probe can be used for example in agriculture and livestock farming, the food and pharmaceutical industries or in clean rooms. The digital interface with the Modbus RTU or CANopen communication protocol facilitates the design-in of the EE072.
Versatile in Use and Highly Accurate
A wide temperature range of -40 to 80…
4 in 1 Probe Measures CO2, Humidity, Temperature and Pressure
The EE872 from E+E Elektronik measures the CO2 concentration up to 5 % (50 000 ppm) as well as relative humidity, temperature and ambient pressure. Additionally, the 4 in 1 probe also calculates the dew point temperature. It is perfectly suited for use in harsh and aggressive environment, such as agricultural applications. The active pressure and temperature compensation ensures a very high CO2 measuring accuracy. A heated probe version is…
New CO2 Sensor for Railway Applications
The EE8915 from E+E Elektronik meets all relevant railway standards for reliable CO2 measurement in railway vehicles, e.g. in the passenger compartment or driver's cab. On-board sensors ensure high CO2 measurement accuracy independently of temperature, altitude or weather conditions. Due to excellent measurement performance in harsh environment, the sensor is also suitable for demanding process and climate control.
Long-Term Stable CO2 Measurement
The E+E NDIR dual wavelength infrared measuring principle is particularly…
More Releases for EE741
Modular In-Line Flow Meter for Compressed Air and Gases
The compact EE741 in-line flow meter from E+E Elektronik measures accurately the consumption of compressed air and technical gases. Thanks to the modular design, one and the same transmitter can be used for three different pipe diameters (DN15, DN20, DN25). To do so, the transmitter is simply combined with the appropriate gauge mounting block. The thermal hot-film anemometer measurement principle stands for best long-term stability and short response time.
Easy installation…
