Wafer Temperature Measurement Equipment Market Size will Escalate Rapidly in the 2017 - 2025

Wafer temperature measurement equipments are utilized for monitoring the temperature of wafer, during electronics manufacturing. Almost all processes, involved in silicon wafer fabrication and electronics manufacturing, requires effective monitoring and regulation of wafer temperature. The monitoring of temperature is very important in every stage of electronics manufacturing.

A sample of this report is available upon request @ https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=21935

Changes in temperature, of even 0.1 centigrade can lead to non homogeneity in quality of integrated circuits (ICs) or electronics produced. Additionally, different wafers have different emissivity. The higher the emissivity of a wafer is, the higher amount of energy will be emitted by that wafer. Accurate wafer emissivity is required to be known for accurate measurement of wafer temperature. Several processes, such as physical vapor deposition (PVD), chemical vapor deposition (CVD), atomic layer deposition (ALD) and high density plasma chemical vapor deposition among others, can be vastly improved by accurate measurement and regulation of the wafer temperature, when the process is ongoing.

Wafer temperature measurement equipment market has been growing at a steady pace, owing to the increase in size of wafers. The current semiconductor industry is moving towards sub-micron size of circuits, while the wafer size is getting larger for increasing productivity and resource optimization. The increase in size of wafers has also led to increasing demand for in-process measurement and maintenance of wafer temperatures, for maintaining homogeneity of wafer nature throughout the wafer surface. This in turn has been positively impacting the growth of the wafer temperature measurement equipment. Additionally, the increasing complexity of electronic devices has been primarily due to advent of 2.5D and 3D packaging technologies.

Such technologies utilize multiple wafers and non homogeneity in wafer quality can lead to a non functioning or a malfunctioning chip. To maintain homogeneity of such chips, the temperature measurement and maintenance of wafers, is highly required, which in turn has been boosting the demand of wafer temperature measurement equipment in semiconductor manufacturing facilities. Furthermore, the global growth in demand for various electronic devices has also been boosting the demand for wafers. Such growth in demand for wafers has resulted in growth in number of semiconductor manufacturing facilities. This in turn has been boosting the global demand for wafer temperature measurement equipments, in such semiconductor manufacturing facilities.

However, with the advent of different wafer materials and packaging technologies, most of wafer temperature measurement equipments currently available today can be termed to have relatively bad signal to noise ratio (SNR). Better SNR increases accuracy and most wafer temperature measurement equipment manufacturers are currently targeting the improvement of SNR ratios in their equipments. Such improvements can offer good growth opportunities for the wafer temperature measurement equipment market globally, during the forecast period.

On the basis of type, the market for wafer temperature measurement equipment has been segmented into contact and non contact types. Non contact wafer temperature measurement equipments segment has been growing at a fast pace and is expected to maintain its fast growth pace, during the forecast period. On the basis of process, the market is segmented into front end of the line (FEOL), back end of the line (BEOL) and both. ‘Both’ segment was the largest segment in 2016, owing to the capabilities of these equipments to function in both FEOL and BEOL processes. By application, the market has been segmented into thin film deposition, process, etching process, lithography process, implant & wet process and others. On the basis of region, the global market for wafer temperature measurement equipment has been segmented into North America, Europe, Asia Pacific (APAC), South America and Middle-East & Africa (MEA).

To view TOC of this report is available upon request @ https://www.transparencymarketresearch.com/sample/sample.php?flag=T&rep_id=21935

The major companies of the wafer temperature measurement equipment market globally are KLA-Tencor Corporation (The U.S.), CI Systems, Ltd. (Israel), ASML N.V. (The Netherlands), Applied Material, Inc. (The U.S.) and LAM Research Corporation (The U.S.) among various other companies.

About US
Transparency Market Research (TMR) is a next-generation provider of syndicated research, customized research, and consulting services. TMR’s global and regional market intelligence coverage includes industries such as pharmaceutical, chemicals and materials, technology and media, food and beverages, and consumer goods, among others. Each TMR research report provides clients with a 360-degree view of the market with statistical forecasts, competitive landscape, detailed segmentation, key trends, and strategic recommendations.

Contact Us-

U.S. OFFICE:
State Tower,
90 State Street,
Suite 700,
Albany NY - 12207

This release was published on openPR.