Regenerative Feedback Conveyors Market to Perceive Substantial Growth During 2015 - 2023

Ore mining continues to follow historic trends, but more recently toward higheraltitudes. Today, altitudes of 3,000 metersto 4,000 meters abovesea level are by no means unusual for new copper mines. This places very heavy stress on personnel.At high altitudes, it is recommended to install onlythose equipmentswhich are directly required for mining the ore.A very attractive solution to this problem is the use of conveyors with downwardbelt mechanisms, which transport the mineral from the mineto the concentrator. The bidirectional nature of the power flow of electrical machinespermits the transformation of the potential energy of theore in the conveyor into electrical energy that can be regeneratedto the electrical supply of the mine, generating importantenergy savings.When the amount of ore handled is in the range of100,000 tons/day, power produced by a conveyor may surpassseveral megawatts and must be delivered to the electricalutility.A downhill conveyor is mounted between the quarry areaand the raw material section of the plant. Because of the operational requirements, the drive is to beadjustable in speed, and has to be capable of regenerating the power on the downhill section.All operating processes nowadays are monitored, with sophisticated control systems. A huge advantage asserted for Active Front End (AFE) technology is the fact that it is network friendly.

A sample of this report is available upon request @ https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=6529

Rapid augmentation in the high-altitude metal mining industry combined with increased demand of metals for construction and other industrial applications, make up for growth drivers for regenerative conveyors. Moreoveractive front end solutions result in less stress for personnel due to high altitudes, and theequipment does not need to be highly derated. Despite the positive growth, the industry has been facing certain restrictions in terms of mining extraction methods and the extent of extraction allowed. Government regulations have been put into place over concerns of ecological imbalance and environmental hazards that excavation and mining of metals and non-metals has caused over the years. Mining has had a major impact on agricultural lands as well. Intensive capital requirement and availability of expertise for operations are also some of the factors that have hindered the progress of mining, thereby reducing the demand for regenerative conveyors. Despite all the limitations, new opportunities lie in store. With the advent of new eco-friendly mining technologies, metal mining could see a spur of growth in the near future.

For conveyors generating several megawatts of energy per day, medium-voltage drives must be considered.At this voltage level, converter topologies can be segmented based on the type of drive installed, viz. cyclo-converters, current-source inverters (CSIs),three-level voltage-source inverters (VSIs), and cascadedmultilevel (CML) inverters.Conveyors with longer belt length have proven to be a challenge for applications involving drive and control techniques. Depending on material to be transported and regional characteristics, a customized drive system must be installed for each separate condition. In certain areas these drive systems have to be selected based on standards set by local environmental agencies as well.

To view TOC of this report is available upon request @ https://www.transparencymarketresearch.com/sample/sample.php?flag=T&rep_id=6529

Geographically, demand for regenerative conveyors is concentrated in mining hotspots across the globe. Most of the world’s mining and production of metals is carried out in Australia in the AsiaPacific region followed by Sri Lanka, Myanmar Thailand, Laos, Malawi and Cambodia. The state of Montana and Arizona in the U.S. lead the market in the North American region. No significant deposits or mines exist nor have they recently been discovered in Europe; hence mining activities there are limited. The African region also boasts a significant metalextraction dominated by Tanzania, Kenya, Nigeria, Madagascar and South Africa.

A few companies involved in the manufacturing of regenerative conveyors for metal mining include Dos Santos International LLC, RWE Power International LLC, Conveyor Dynamics, Inc., Calsun Materials Handling (Pty) Ltd., Siemens AG, Sandvik AB, Tenova S.p.A. and ThyssenKrupp Industries India.

Get access to full summary @ : https://www.transparencymarketresearch.com/regenerative-feedback-conveyors-market.html

About US
Transparency Market Research (TMR) is a next-generation provider of syndicated research, customized research, and consulting services. TMR’s global and regional market intelligence coverage includes industries such as pharmaceutical, chemicals and materials, technology and media, food and beverages, and consumer goods, among others. Each TMR research report provides clients with a 360-degree view of the market with statistical forecasts, competitive landscape, detailed segmentation, key trends, and strategic recommendations.

Contact US
Abhishek Budholiya
State Tower,
90 State Street,
Suite 700,
Albany NY - 12207
United States
Tel: +1-518-618-1030
Website: https://www.transparencymarketresearch.com/
Email: sales@transparencymarketresearch.com

This release was published on openPR.