Press release
Global Produced Water Treatment Systems Market is Expected to Surpass Revenues Worth US$ 6 Bn by 2020 end
With rising demand for crude oil and gas, the need for extraction and production has consistently been on the rise since the past decade. This will remain a key factor propelling the demand for effective produced water treatment systems globally. Moreover, developing regions are constantly facing challenges regarding availability of usable water, which is also identified to fuel the market for better, more efficient, and cost-effective water treatment solutions over the next few years.
Request to view table of content @ https://www.persistencemarketresearch.com/market-research/produced-water-treatment-systems-market/toc
PMR expects increased volumes of produced water generation by 2020 end. In addition, the market also estimates spiking ratio of oil-to-produced water. These factors are anticipated to collectively drive the market in the near future.
Several governments have been mandating stringent regulatory measures in order to maintain the environmental impact of reuse and disposal of produced water. This will continue to escalate the demand for new water treatment systems. Moreover, reinjection norms of the petroleum industry will continue to boost the market for produced water treatment systems.
A sample of this report is available upon request @ https://www.persistencemarketresearch.com/samples/12949
The oil and gas industry is consistently observing rising exploration of accessible on-shore and off-shore reserves, which is another important factor foreseen to drive the market growth. Introduction of new water treatment technologies are predicted to support the market post-2016. However, high capital costs associated with installation and operation of produced water treatment systems are likely to remain a barrier to widespread adoption.
On the basis of technology, secondary and tertiary treatment systems segments are identified to be the major market shareholders in 2015. However, tertiary treatment systems segment is expected to emerge faster compared to secondary treatment systems segment. Expanding at an estimated 9.1% CAGR over 2015-2020, tertiary treatment systems segment is projected to account for the largest share of the market by 2020 end.
Based on geography, the global produced water treatment systems market is classified into five regions viz. North America, Latin America, Europe, Asia Pacific, and Middle East and Africa. North America will continue to be the largest regional market for produced water treatment systems, attributed to wide acceptance of tertiary treatment technology among end-use sectors. Up from US$ 1.73 Bn registered in 2015, North America will witness a CAGR of over 8% during 2015-2020. Asia Pacific is expected to be the second largest market with a moderate CAGR of 4% estimated over 2015-2020. Europe and APAC will continue to represent lucrative markets, whereas Latin America’s market share is poised to rise up by 2020 end.
The global produced water treatment systems market is operated by a number of companies. Some of the key players analyzed in PMR’s produced water treatment systems market report are Aker Solutions, Siemens AG, FMC Technologies, Inc., Alderley plc, Frames Group, Veolia, Aquatech International, CETCO Energy Services, Ovivo, Eco-Tec, ThermoEnergy Corporation, Schlumberger Limited, Global Water Engineering, Miox Corporation, and Ecosphere Technologies, Inc..
Browse Complete Report @ https://www.persistencemarketresearch.com/market-research/produced-water-treatment-systems-market.asp
While Alderley plc is recognized as one of the top companies leading in primary treatment technologies, Veolia pioneers in off-shore produced water treatment. Aquatech International is concentrating on low CAPEX and OPEX biological processes, whereas Siemens is focusing solely on advanced biological wastewater treatment.
Long-term Outlook: The global market for produced water treatment systems is expected to surpass revenues worth US$ 6 Bn by 2020 end. The market will expand at a CAGR of 6.1% over 2015-2020.
Global Market Study on Produced Water Treatment Systems is available at $4900 @ https://www.persistencemarketresearch.com/checkout/12949
About Us
Persistence Market Research (PMR) is a U.S.-based full-service market intelligence firm specializing in syndicated research, custom research, and consulting services. PMR boasts market research expertise across the Healthcare, Chemicals and Materials, Technology and Media, Energy and Mining, Food and Beverages, Semiconductor and Electronics, Consumer Goods, and Shipping and Transportation industries. The company draws from its multi-disciplinary capabilities and high-pedigree team of analysts to share data that precisely corresponds to clients’ business needs.
PMR stands committed to bringing more accuracy and speed to clients’ business decisions. From ready-to-purchase market research reports to customized research solutions, PMR’s engagement models are highly flexible without compromising on its deep-seated research values.
Contact
Persistence Market Research Pvt. Ltd
305 Broadway
7th Floor, New York City,
NY 10007, United States,
USA – Canada Toll Free: 800-961-0353
Email: sales@persistencemarketresearch.com
media@persistencemarketresearch.com
Web:www.persistencemarketresearch.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Global Produced Water Treatment Systems Market is Expected to Surpass Revenues Worth US$ 6 Bn by 2020 end here
News-ID: 725862 • Views: …
More Releases from Persistence Market Research
Boat Control Lever Market to Reach US$17.03 Bn by 2031, Expanding at 3.8% CAGR | …
The global boat control lever market is witnessing steady growth, driven by advancements in marine technology, increasing recreational boating activities, and rising demand for enhanced safety and operational efficiency in watercraft. According to Persistence Market Research, the market is valued at US$13.12 Bn in 2024 and is projected to expand at a CAGR of 3.8%, reaching US$17.03 Bn by 2031. This expansion reflects both rising consumer interest in marine leisure…
Hydrogen Truck Market to Reach US$ 25.8 Bn by 2032, Growing at 29.5% CAGR | Pers …
The global hydrogen truck market is witnessing a significant shift as governments and industries focus on decarbonizing heavy transport. According to Persistence Market Research, the market is projected to grow from US$ 4.2 Bn in 2025 to US$ 25.8 Bn by 2032, reflecting a robust CAGR of 29.5% during the forecast period. This growth is driven by advancements in hydrogen fuel cell technology, rising adoption of zero-emission transport, and increasing…
Automotive HMI Market Forecast to Double by 2032, Hitting USD 56.1 Billion with …
The global automotive human machine interface (HMI) market is experiencing rapid transformation, shaped by rising digitalization and connected mobility. According to Persistence Market Research, the industry is projected to expand significantly from US$ 28.20 Bn in 2025 to US$ 56.10 Bn by 2032, registering a robust CAGR of 10.3% during the forecast period. HMIs are increasingly becoming the centerpiece of modern vehicles, providing intuitive control panels, voice recognition, and touchscreens…
Fast-Food Reusable Packaging Market to Surpass US$33.96 Bn by 2030 on Back of Ci …
➤Overview of the Market
According to the latest study by Persistence Market Research, the global fast-food reusable packaging market is projected to expand from US$17.21 Bn in 2023 to US$33.96 Bn by 2030, registering a CAGR of 10.2% during the forecast period. Growing sustainability mandates, consumer preference for eco-friendly dining, and regulatory pressures to reduce single-use plastics are transforming packaging strategies across quick-service restaurants worldwide.
The fast-food industry, traditionally reliant on single-use…
More Releases for PMR
Starch Derivatives Market Outlook by 2021 : PMR
Starch derivatives, also known as modified starch, are prepared by enzymatically, physically or chemically treating native starch to alter its properties. Starch derivatives are used in a number of industries for various functions. They are used as thickeners and stabilizers in the food and beverage industry, as a tablet binder in the pharmaceutical industry, as an emulsifier in cosmetics, and fiber additive in the animal feed. Some of the other…
Yeast Ingredients Market Outlook by 2021 : PMR
Yeasts are chemoorganotrophs, as they use organic compounds to source energy and do not require sunlight for growth or survival. Yeasts are usually unicellular; although some species may be multi-cellular. The size of yeast depends on the species. Yeasts usually measure 3 to 4 µm in diameter. However, certain yeasts reach up to 40 µm in diameter. Yeasts reproduce asexually through mitosis (a process, in which, the chromosomes in a…
Confectionery Market Outlook by 2021 : PMR
The confectionery market is one of the growing sectors globally . Usually, confections are low in nutrients and high in calorie. Sugar-free confections are gaining popularity in the recent years due to factors such as increasing obesity rate, increasing number of diabetic patients, increasing nutritional and health concerns, and changing lifestyle. The confectionery market can be primarily divided into two broad categories: sugar confectionery and bakers’ confectionery . Sugar confectionery…
Cereal Bars Market Outlook by 2021 : PMR
A cereal bar is made up of nuts, oats, sugar, dry fruits, flour, honey, wheat, corn, and puffed rice. Cereal bars have always been perceived as on-the-go breakfast snack items that are healthier alternatives of chocolate and other snacks. Cereal bars are high in fiber and protein and low in carbohydrates, vitamins, minerals, sodium, and antioxidants. They come in various flavors such as chocolate, peanut butter, banana, caramel, banana, honey,…
Functional Flours Market Share by 2026 : PMR
The natural flours used for specialty applications in the food industry and undergoes different treatment process to improve their properties are called functional flours. The various properties of functional flours include cold binding capacity, thermal binding capacity, machinability, dough hydration etc. The functional flours are classified as waxy, multi-benefit, instant and granulated type depending on its features. They undergo different physical and nutritional treatment to enhance its features. In dietary…
Global Ceilings Market Snapshot by 2020 : PMR
Ceiling is overhead interior portion within the room which covers the upper portion of the room. Main purpose of ceiling is to achieve the desired height of the roof in the room. Ceilings are frequently decorated with attractive paintings, mosaic tiles and other different designs. Major advantage of decorated ceiling is that it gets protected from damage by fingers and dust. There are certain ceilings which are fire resistance; dropping…
