openPR Logo
Press release

Automotive Cylinder Liner Market Projected to Grow at Steady Rate through (2027)

09-08-2017 12:37 PM CET | Business, Economy, Finances, Banking & Insurance

Press release from: Future Market Insights

Automotive Cylinder Liner Market Projected to Grow at Steady

Automotive cylinder liner is one of the most crucial cylindrical parts of an engine. It is fitted into an engine block to form a cylinder. Automotive cylinder liner is also called as cylinder sleeve. They protect the inner part of the cylinder from wear caused due to friction between cylinder and piston. In the absence of cylinder liner, it would be costly to replace cylinder block when it is worn out due to friction. Automotive cylinder liner serves various functions such as:

Acts as a sliding surface: Cylinder liner acts as a sliding surface for piston rings and retains the lubricant within. They possess high anti-wear properties due to which there is less wear on piston rings.

Request For Report Sample@ https://www.futuremarketinsights.com/reports/sample/rep-gb-3387

Automotive cylinder liner acts as a heat transfer medium as it receives heat from piston and piston rings and it transfers it to the coolant.

Automotive cylinder liner acts as a sealing material as it does not allow compressed and combustion gas to escape from the cylinder due to which efficiency increases.

As the piston slides at a very high speed, high temperature and high pressure are created inside the cylinder. So it is necessary for the cylinder liner to withstand such high temperature and pressure. For this purpose, most of the automotive cylinder liners are made up of cast iron as it possesses excellent thermal and wear resistance properties. Also, it can bear high temperature and high pressure.

Market Trends, Drivers, Restraints

Various materials can be used for the manufacturing of automotive cylinder liner viz, cast iron, aluminum alloys, stainless steel, titanium alloy, etc. The selection of material for automotive cylinder liner depends upon various parameters such as ultimate tensile strength, maximum working pressure and temperature. Out of these materials, most of the manufacturers use cast iron as it is cheaper and possesses various properties. Aluminum liners are preferred where body is made up of aluminum.

As the demand for automobile is increasing significantly, automotive cylinder liner market is expected to witness significant growth. Various automotive cylinder liner manufacturers are using advanced technologies to reduce the cost of production of cylinder liner. Cylinder liner is an important part of an engine as it also contributes towards the engine efficiency. Companies are trying to manufacture cylinder liners, which will reduce oil consumption. Also, many automotive cylinder liner manufacturers are investing in research and development so that it provides less friction. Mergers and acquisitions are the key strategies that have been adopted by leading companies in order to strengthen their position in the global OEM market and in the aftermarket segment to increase their market share.

Nowadays, many automobile manufacturers prefer lightweight material to be used in the assembly of an automobile. As automotive cylinder liner adds weight to the engine, overall weight of the automobile increases due to automotive cylinder liner. So, rather than using additional cylinder liner, many OEMs are using new technologies such as mirror bore coating technology and twin-wire arc spraying process, which eliminates the use of cylinder liner and allows improved performance of an engine. This acts as a threat to the growth of the global automotive cylinder liner market.

Visit For TOC@ https://www.futuremarketinsights.com/toc/rep-gb-3387

Market Segmentation

The global automotive cylinder liner market can be segmented by type, material, vehicle type used and application.

On the basis of cylinder liner type, the global automotive cylinder liner market is segmented as:

Dry Cylinder Liner

Wet Cylinder Liner

On the basis of application, the global automotive cylinder liner market is segmented as:

Diesel Engine

Gasoline Engine

On the basis of material used, the global automotive cylinder liner market is segmented as:

Cast iron cylinder liner

Aluminum alloy cylinder liner

Stainless steel cylinder liner

Titanium alloy cylinder liner

On the basis of vehicle type, the global automotive cylinder liner market is segmented as:

Light duty vehicle cylinder liner

Heavy duty vehicle cylinder liner

Market Participants

Examples of some of the market participants in the global automotive Cylinder Liner market identified across the value chain include

Federal-Mogul LLC

MAHLE GmbH

GKN China Holding Co. Ltd.

Melling Cylinder Sleeves

TPR CO. LTD.

Westwood Cylinder Liners Ltd.

Darton International, Inc.

ZYNP

LAYSTALL ENGINEERING COMPANY LIMITED.

ADVANCED SLEEVE

Kusalava.

Metallic Auto Liners.

India Pistons Ltd.

Cooper Corp.

Liners India Ltd

ABOUT US:
Future Market Insights (FMI) is a leading market intelligence and consulting firm. We deliver syndicated research reports, custom research reports and consulting services, which are personalized in nature. FMI delivers a complete packaged solution, which combines current market intelligence, statistical anecdotes, technology inputs, valuable growth insights, an aerial view of the competitive framework, and future market trends.

Future Market Insights
616 Corporate Way, Suite 2-9018,
Valley Cottage, NY 10989,
United States
T: +1-347-918-3531
F: +1-845-579-5705
Email: sales@futuremarketinsights.com
Website: www.futuremarketinsights.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Automotive Cylinder Liner Market Projected to Grow at Steady Rate through (2027) here

News-ID: 705773 • Views: 153

More Releases from Future Market Insights

How Changing Dynamics of Cable Testing Market are Reflecting on Growth Strategie …
Global Cable Testing Market: Introduction The cost of the substitution of cables that are concealed is very high. Faults in the cable, bending, kinking, and crushing, are not always visible, which has created the requirement for cable testing. Thus, cable testing helps check the cable functionality, cable quality, and cable conformity. Several times, cable testing by visual inspection is an effective way of identifying the actual problem before it causes any
How Transformative Trends in Self-Organising Network Market are Molding Strategi …
Self-Organising Network: Introduction With accelerated advancements and increasing complexities in the radio network technologies, such as those utilised for the development of LTE and 5G networks, which are used for planning, management, configuration, healing and optimisation, are required to be automated to facilitate efficiency. At present, suppliers are offering self-organising networks that possess the ability to offer optimum performance. Self-organising networks are use cases that perform network governance, including network planning,
Mining Vehicle AC Kits Market: Exploring the Impact of Trends on Strategies of K …
Mining Vehicle AC Kits Market: Introduction Cabin space in mining equipment has become more sophisticated in the recent past. The installation of mining vehicle AC kits has evolved from an optional feature to a necessary feature. Mining equipment manufacturers have made advancements in technology related to efficiency, performance and cost of air conditioning systems in order to make them affordable and economical to enable low-budget and compact installations without compromising on
Key Factors to Fuel Growth of the Talent Acquisition & Staffing Technology and S …
With the growing importance of recruiting and retaining top talent effectively and efficiently, smart hiring processes are the need of the hour. It is about time organisations move beyond merely scrutinising resumes. Salaries and benefits are important factors, but adopting ways that would make candidates an important part of the hiring process will attract the best talent. Studies reveal that due to discrepancies in existing Applicant Tracking Systems (ATS), hiring

All 5 Releases


More Releases for Cylinder

Automotive Cylinder Liners & Cylinder Sleeves Market Professional Analysis Repor …
A cylinder is the central working part of a reciprocating engine or pump, the space in which a piston travels.[1] Multiple cylinders are commonly arranged side by side in a bank, or engine block, which is typically cast from aluminum or cast iron before receiving precision machine work. Cylinders may be sleeved (lined with a harder metal) or sleeveless (with a wear-resistant coating such as Nikasil). A sleeveless engine may
Brake Cylinder Market 2018: QY Research
QY Research always aims at offering their clients an in-depth analysis and the best research material of the various market. This new report on the global Brake Cylinder market is committed fulfilling the requirements of the clients by giving them thorough insights into the market. An exclusive data offered in this report is collected by research and industry experts. Sample link: https://www.qyresearch.com/index/detail/219516/global-brake-cylinder-market Key Manufacturers: The global Brake Cylinder market report covers
Hydraulic Cylinder Market PESTLE & SWOT Prophesy 2025
Global Hydraulic Cylinder Market: Snapshot Hydraulic cylinders play a crucial role in motion control in a wide range of industrial applications such as in aerospace, wind turbines, industrial robotics, and military. They are used in making mobile industrial concrete pumps which have varied applications in the construction industry. The unidirectional force generated in the hydraulic fluids drives the power in piston rods, which helps in lifting, pushing, and pulling of
Hydraulic Cylinder Market Demand pulling strategies 2025
Global Hydraulic Cylinder Market: Snapshot Hydraulic cylinders play a crucial role in motion control in a wide range of industrial applications such as in aerospace, wind turbines, industrial robotics, and military. They are used in making mobile industrial concrete pumps which have varied applications in the construction industry. The unidirectional force generated in the hydraulic fluids drives the power in piston rods, which helps in lifting, pushing, and pulling of
Cylinder Head Gasket Industry Market Research 2017
In this report, we analyze the Cylinder Head Gasket industry from two aspects. One part is about its production and the other part is about its consumption. In terms of its production, we analyze the production, revenue, gross margin of its main manufacturers and the unit price that they offer in different regions from 2012 to 2017. In terms of its consumption, we analyze the consumption volume, consumption value, sale
Global Cylinder Sensors Sales Market Report 2017
The Cylinder Sensors Industry 2017 Market Research Report is a professional and in-depth study on the current state of the Cylinder Sensors industry. Firstly, the report provides a basic overview of the industry including definitions, classifications, applications and industry chain structure. The Cylinder Sensors market analysis is provided for the international market including development history, competitive landscape analysis, and major regions’ development status. Secondly, development policies and plans are discussed as well as manufacturing processes and