openPR Logo
Press release

Humidity and temperature transmitter with interchangeable probes

08-25-2017 12:12 PM CET | Industry, Real Estate & Construction

Press release from: E+E Elektronik Ges.m.b.H.

EE220 in metal enclosure with separate sensing probes for humidity and temperature.

EE220 in metal enclosure with separate sensing probes for humidity and temperature.

The EE220 transmitter from E+E Elektronik measures relative humidity and temperature in the range from -40 °C to 80 °C (-40 °F to 176 °F) with a high accuracy of ±2 % RH and ±0.1 °C (±0.18 °F). The basis unit can be fitted with various pluggable and interchangeable sensing probes. Separate probes for humidity and temperature enable highly accurate loop calibration. The easy-to-clean metal enclosure and stainless steel probes are ideal for clean room applications and use in the pharmaceutical and food industry.

Probe exchange in a matter of seconds

The EE220 basis unit can be equipped with a combined humidity and temperature probe or two separate probes, one for humidity and one for temperature. The EE07 probes can either be plugged directly onto the basis unit or mounted up to 10 m away using extension cables. Thanks to the plug-in system, the sensing probes can be exchanged in just a few seconds. As the calibration data is stored in the intelligent probes, the transmitter does not need to be re-calibrated after a probe replacement.

Loop calibration according to FDA recommendation

The use of separate stainless steel sensing probes for humidity and temperature enables most accurate loop calibration, as recommended by the FDA (Food and Drug Administration) for the pharmaceutical and biotechnology industry. Using extension cables and without dismounting the EE220 basis unit, the humidity probe can be placed in a portable humidity calibrator and the temperature probe in a dry block calibrator. Thus, the entire measurement chain from the probe to the controller can be calibrated on-site (loop calibration).
The probes can be individually adjusted with buttons on the E220 electronics board. Adjustment and calibration is particularly comfortable using the optional display, which can be simply plugged onto the EE220 board for this purpose.

Accuracy check with reference probes

Two reference probes can be used instead of the regular probes to check the correct functioning and accuracy of the EE220 basis unit. The reference probes simulate defined humidity and temperature values which can be compared with the EE220 outputs.

Optimum sensor protection

The optional E+E proprietary coating is brings relevant benefits in harsh ambient conditions. It protects the sensing elements from dirt, dust and corrosion, thereby considerably improving the long-term stability and lifetime.

Options and accessories

The EE220 basis unit and the EE07 sensing probes are available with polycarbonate or stainless steel enclosure. The current measured data is available locally on the optional display. The EE220 is suitable for wall mounting and rail installation according to DIN EN 50002. A duct mounting kit is also available.

E+E Elektronik develops and manufactures sensors and transmitters for humidity, temperature, dewpoint, moisture in oil, air velocity, flow and CO2. Data loggers, hand-held measuring devices and calibration systems complete the comprehensive product portfolio of the Austrian sensor specialist. The main applications for E+E products lie in HVAC, building automation, industrial process control and the automotive industry. A certified quality management system according to ISO 9001 and ISO/TS 16949 ensures the highest quality standards. E+E Elektronik has a worldwide dealership network and representative offices in Germany, France, Italy, Korea, China and the United States. The accredited E+E calibration laboratory (OEKD) has been commissioned by the Austrian Federal Office for Metrology (BEV) to provide the national standards for humidity and air velocity.

E+E Elektronik Ges.m.b.H
Langwiesen 7
4209 Engerwitzdorf
Austria
T: +43 (0) 7235 605-0
F: +43 (0) 7235 605-8
info@epluse.at
www.epluse.com

Press contact:
Mr. Johannes Fraundorfer
T: +43 (0)7235 605-217
pr@epluse.at

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Humidity and temperature transmitter with interchangeable probes here

News-ID: 685149 • Views: 458

More Releases from E+E Elektronik Ges.m.b.H.

New CO2 Sensor for Railway Applications
The EE8915 from E+E Elektronik meets all relevant railway standards for reliable CO2 measurement in railway vehicles, e.g. in the passenger compartment or driver's cab. On-board sensors ensure high CO2 measurement accuracy independently of temperature, altitude or weather conditions. Due to excellent measurement performance in harsh environment, the sensor is also suitable for demanding process and climate control. Long-Term Stable CO2 Measurement The E+E NDIR dual wavelength infrared measuring principle is particularly
Digital CO2, Humidity and Temperature Sensor
The EE850 duct mount sensor from E+E Elektronik combines the CO2, relative humidity (RH) and temperature (T) measurement in a single device. The sensor can be easily integrated into a bus system via the RS485 interface (Modbus RTU or BACnet MS/TP). The 3-in-1 device is dedicated for building automation as well as for demanding process control. The EE850 features the E+E dual wavelength NDIR CO2 sensing cell, which is particularly insensitive
Humidity Transmitters with Stainless Steel Enclosure
The high-end EE310 and EE360 industrial transmitters from E+E Elektronik are now available with stainless steel or with polycarbonate enclosure. The EE310 humidity and temperature transmitter is dedicated for demanding industrial processes control. The EE360 measures the moisture content of industrial oils and thus enables predictive maintenance of machines and plants. Display with Data Logger Function Both devices feature an optional 3.5" TFT color display, which offers an optimal view
Dew Point Measurement Module for High Humidity Applications
The EE1950 dew point measurement module from E+E Elektronik is dedicated for OEM applications with continuous high humidity and condensing conditions, such as climate and test chambers. Excellent temperature compensation ensures high accuracy over the entire working range from -70 °C to 180 °C (-94 °F to 356 °F). The device is also particularly resistant to pollutants and corrosive agents. Optimized for High-Humidity Conditions The EE1950 employs the innovative, heated E+E

All 5 Releases