Press release
Automotive Polymer Matrix Composites Systems - Global Industry Analysis 2025
A composite is defined as a multiphase material that exhibits a significant proportion of properties of both constituent phases. It usually consists of a continuous phase, called the matrix, and a dispersed phase called the reinforcement. Polymer matrix composite is polymer-based reinforced material that is used in various end-use industries such as construction, transportation, oil & gas, sports, energy, aerospace, consumer goods, and electrical & electronics. The automotive industry is a prominent end-use industry for polymer matrix composites. Various resins such as polypropylene, polycarbonates, polyamides, acrylonitrile-butadiene styrene, and other engineered plastics are employed, along with reinforcing fibers, to manufacture automotive polymer matrix composite. The global automotive polymer matrix composites can be segmented into fiber used and application areas in the automotive industry.
Browse Market Research Report @
http://www.transparencymarketresearch.com/automotive-polymer-matrix-composites-market.html
The most commonly used fibers for automotive application are carbon fiber and glass fiber. The carbon fiber reinforcement possesses diverse mechanical and physical characteristics such as a high strength to weight ratio and corrosion resistance. These properties allow it to be utilized to make lightweight and strong components. However, glass reinforcement is majorly produced due to its relatively low cost and competitive physical and mechanical characteristics. Nevertheless, high strength to weight ratio of carbon fibre reinforced composites is predicted to offer enormous growth opportunities during the next few years.
Composites offer many structural and weight advantages over traditional steel and injection molded automotive parts such as cost and weight reduction and recyclability. Polymer matrix composites are generally employed in the manufacturing of interiors, exteriors, and structural parts. The exterior segment accounts for significant share of the automotive polymer matrix composites market. The carbon fiber reinforced composites is anticipated to be highly attractive segment by the end of the forecast period due to rising demand for high performance lightweight materials in the automotive industry.
The passenger cars segment is anticipated to drive the expansion of the global automotive industry due to a rise in disposable income. However, increasing environmental concerns and pollution are estimated to be a slight hindrance during the forecast period. Automotive manufacturers are focusing on reducing their weight to provide highly efficient cars and reduced fuel consumption. Therefore, OEMs are substituting traditional materials with advanced engineered composites such as polymer matrix composites. Furthermore, polymer matrix composites offer high stiffness, tensile strength, and temperature tolerance, and low weight and thermal expansion. Thus, they are preferred in the manufacture of automobiles. This is estimated to boost the demand for automotive polymer matrix composites during the forecast period. Additionally, polymer-reinforced composites offer excellent crash performance as compared to traditional steel. Therefore, along with weight reduction, composites in vehicles offer better safety components. These properties are predicted to augment the demand for automotive polymer matrix composites in the near future. However, the high cost of carbon composites might slightly hinder the expansion of the automotive composites market in the near future.
In terms of geography, the global automotive polymer matrix composites market can be segmented into North America, Europe, Asia Pacific, Latin America, and Middle East & Africa. The automotive polymer matrix composites market in Asia Pacific is anticipated to expand during the forecast period due to rapid expansion of the automotive industry in countries such as China, India, and Japan. Thus, Asia Pacific is anticipated to dominate the global market during the forecast period. North America and Europe follow Asia Pacific in the automotive polymer matrix composites in terms of market share. Nonetheless, North America is anticipated to offer high growth opportunities for the carbon reinforced automotive polymer composites market. The automotive polymer matrix composites market in Latin America is likely to expand at a significant rate during the forecast period, due to the considerable expansion of the automotive industry in the region. Middle East & Africa is also anticipated to expand in the automotive polymer matrix composites market.
Get accurate market forecast and analysis on the Automotive Polymer Matrix Composites market. Request a sample to stay abreast on the key trends impacting this market@
http://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=24806
The global automotive polymer matrix composites market is slightly consolidated, with U.S. and China being prominent manufacturers of composites. However, there are several manufacturers around the world. Key players operating in the automotive polymer matrix composites market include Hexcel Corporation, TPI Composites, Inc., Owens Corning, Teijin Limited, Toray Industries, and Hexagon Composites
The report offers a comprehensive evaluation of the market. It does so via in-depth qualitative insights, historical data, and verifiable projections about market size. The projections featured in the report have been derived using proven research methodologies and assumptions. By doing so, the research report serves as a repository of analysis and information for every facet of the market, including but not limited to: Regional markets, technology, types, and applications.
The study is a source of reliable data on:
Market segments and sub-segments
Market trends and dynamics
Supply and demand
Market size
Current trends/opportunities/challenges
Competitive landscape
Technological breakthroughs
Value chain and stakeholder analysis
The regional analysis covers:
North America (U.S. and Canada)
Latin America (Mexico, Brazil, Peru, Chile, and others)
Western Europe (Germany, U.K., France, Spain, Italy, Nordic countries, Belgium, Netherlands, and Luxembourg)
Eastern Europe (Poland and Russia)
Asia Pacific (China, India, Japan, ASEAN, Australia, and New Zealand)
Middle East and Africa (GCC, Southern Africa, and North Africa)
About Us
Transparency Market Research (TMR) is a market intelligence company, providing global business information reports and services. Our exclusive blend of quantitative forecasting and trends analysis provides forward-looking insight for thousands of decision makers. TMR's experienced team of Analysts, Researchers, and Consultants, use proprietary data sources and various tools and techniques to gather and analyze information.
Our data repository is continuously updated and revised by a team of research experts, so that it always reflects the latest trends and information. With a broad research and analysis capability, Transparency Market Research employs rigorous primary and secondary research techniques in developing distinctive data sets and research material for business reports.
Contact Us
Transparency Market Research
90 State Street, Suite 700
Albany, NY 12207
Tel: +1-518-618-1030
USA - Canada Toll Free: 866-552-3453
Email: sales@transparencymarketresearch.com
Website: http://www.transparencymarketresearch.com/
Visit : http://depthresearchreport.blogspot.in/
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Automotive Polymer Matrix Composites Systems - Global Industry Analysis 2025 here
News-ID: 617573 • Views: …
More Releases from Transparency Market Research
Global Solar Powered Agricultural Dryer Market to Exceed USD 2.4 Billion by 2031 …
The global solar powered agricultural dryer market, valued at US$ 1.6 billion in 2022, is projected to grow at a CAGR of 5.8% from 2023 to 2031, reaching US$ 2.4 billion by the end of 2031. Rising investments in renewable energy, growing awareness of sustainable agricultural practices, and the rapid expansion of the agricultural sector driven by population growth are key factors fueling market growth.
Uncover essential discoveries and trends from…
Technetium-99m Market Forecast 2034: Rising Demand for Diagnostic Imaging and Ra …
The global Technetium‐99m Market was valued at US$ 6.0 Billion in 2023 and is projected to grow at a CAGR of 3.3% from 2024 to 2034, surpassing US$ 8.6 Billion by the end of the forecast period. Advancements in nuclear imaging infrastructure, government-backed healthcare initiatives, and an increasing demand for precise diagnostic procedures are fueling this growth.
Discover essential conclusions and data from our Report in this sample -
https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=77100
Analysts' Viewpoint
The Technetium‐99m…
Equine Diagnostic Services Market Outlook 2030: From US$ 168 Million in 2019 to …
The global Equine Diagnostic Services Market, valued at approximately US$ 168 million in 2019, is projected to expand at a compound annual growth rate (CAGR) of ~5% from 2020 to 2030, reaching around US$ 280 million by 2030. Equine diagnostic services, encompassing tests like genetic, infectious disease, and imaging diagnostics, are critical for managing horse health in veterinary hospitals, clinics, and mobile settings. The market is driven by increasing equine…
Digital Printing Market to Reach USD 54.4 Billion by 2034, Growing at a CAGR of …
The digital printing market is experiencing strong growth, driven by rapid technological advancements, rising demand for personalized and on-demand printing, and an increasing focus on sustainable solutions. Digital printing allows for the direct transfer of digital files onto a wide range of substrates, offering high-resolution output with greater speed and flexibility. Its adaptability has led to broad adoption across industries such as packaging, textiles, publishing, and advertising-sectors where customization, efficiency,…
More Releases for Composites
Polymer Matrix Composites(PMC) Market Size, Share and Forecast By Key Players-He …
𝐔𝐒𝐀, 𝐍𝐞𝐰 𝐉𝐞𝐫𝐬𝐞𝐲- According to the MRI Team's Market Research Intellect, the global Polymer Matrix Composites(PMC) market is anticipated to grow at a compound annual growth rate (CAGR) of 9.59% between 2024 and 2031. The market is expected to grow to USD 5.85 Billion by 2024. The valuation is expected to reach USD 11.1 Billion by 2031.
The Polymer Matrix Composites (PMC) market is experiencing significant growth, driven by increasing demand from industries such as…
Global Composites Core Materials Market Analysis 2020 3A Composites, BASF SE, Co …
The Composites Core Materials market study exhibits a comprehensive analysis of the historic, current, and future trends across the globe. The report comprises of definitions, classifications, product specifications, and market overview, manufacturing processes, cost structures, and raw material analysis. The Composites Core Materials market report provides the end-to-end analysis of this business vertical, and the detailed information about the industry, such as the market size, revenue, volume, market share, growth…
Worldwide Rail Composites Market 2023 Key Players – Able Manufacturing & Assem …
MarketStudyReport.com offers 2018 report on global Rail Composites market that evaluates industry growth trends through historical data and estimates future prospects based on comprehensive research. The report extensively provides the market share, growth, trends and forecasts for the period 2018-2023.
This report focuses on the Rail Composites market, especially in North America, Europe and Asia-Pacific, South America, Middle East and Africa. This report categorizes the market based on manufacturers, regions, type…
Composites Testing Market – Overview On Upcoming Need 2025 | Matrix Composites …
Global Composites Testing Market: Snapshot
Composite testing is most commonly defined as the testing or analysis of composite materials. Composite and non-metallic materials, such as concrete, fiber-reinforced polymers, thermoplastic composites, shape memory polymer composites, high strain composites, metal matrix composites, ceramic matrix composites, sandwich-structured composite, and wood plastic composite, are becoming increasingly prevalent in various manufacturing applications. Since these materials are highly complex in structure, the need for their accurate and…
Construction Composites Market Comprehensive Study 2018: Trex Company, Diversifi …
GMI presents a most up-to-date research on “Construction Composites Market – Global Industry Analysis, Size, Share, Product (Fiberglass, Composite Wood, Metal Composites), Growth Potential, Trends Statistics, Regional Outlook (U.S., Canada, Germany, UK, France, Spain, Italy, Russia, China, India, Japan, Australia, Indonesia, Malaysia, Brazil, Mexico, South Africa, Saudi Arabia, UAE) and Forecast 2017 – 2024”.
Request for a sample copy of this report @
www.gminsights.com/request-sample/detail/2585
Construction Composites Market size is forecast to exceed USD…
Construction Composites Market 2018 Global players Trex Company, Diversified Str …
Growing construction activities in the emerging countries due to massive government investments to improve public infrastructure will boost the construction composites market size by 2025. For instance, in India USD 2.4 billion project is currently in progress to build the Navi Mumbai International Airport that started in March 2015 and is expected to be completed till 2019. Similarly, UAE has been making considerable investment in constructing ports which was valued…
