Global Phase Change Thermal Interface Material (PCTIM) Market-Segmented by Conductive Type, Binder Type, Filler Type, By End-User Industry, and Geography-Trends and Forecasts to 2022

Orbis Research released a new research report of 170 pages on title “Global Phase Change Thermal Interface Material (PCTIM) market-Segmented by Conductive Type, By Binder Type, By Filler Type, By End-User Industry, and Geography-Trends and Forecasts (2017-2022)” Report Focuses on Market, Status and Forecast, by Players, Types and Applications’ with detailed analysis, forecast and strategies.

The Global Phase Change Thermal Interface Material (PCTIM) Market has been estimated at USD XX.XX million in 2015 and is projected to reach USD 65.69 million by 2020, at a CAGR of 11.49% during the forecast period. Phase Change Thermal Interface Material (PCTIM) is a class of material, which remains solid at room temperature and start changing to liquid form, as and when its temperature start increasing. The aforementioned phase change generally occurs in the temperature range of 40 °C to 70 °C. PCTIM is a mixture of fine particle ceramic fillers (made of either BN, Al2O3, ZnO or AlN) for thermal enhancement, organic fillers (blend of low-melt-point crystalline component such as wax, and polymer), and supporting substrate (optional) such as woven glass mesh or aluminum.

Download PDF Sample of Phase Change Thermal Interface Material (PCTIM) Market Report@ http://www.orbisresearch.com/contacts/request-sample/218305

The prime feature of PCTIM pads is their capability to transform their physical characteristics i.e. at room temperature they are firm and easy to handle, in turn allowing better control when applying the solid pads to heat-sink surfaces. They are supplied in solid bit flexible sheets varying in size, shape and thickness. They may or may not have and embedded substrate carrier.

PCTIM, owing to their process convenience, negligible material waste and ability to provide close interfacial contact and forming extreme bond lines, are increasingly becoming an integral part of various commercial and industrial sectors. In the PCTIM market report, we have taken the following major end-user sectors into consideration: Computers, Electrical and Electronics, Telecom, Automotive, and Other sectors. The computers segment accounted for more than XX.XX% share of the global PCTIM market in 2015.

Browse Full Report with TOC: http://www.orbisresearch.com/reports/index/global-phase-change-thermal-interface-material-pctim-market-segmented-by-conductive-type-by-binder-type-by-filler-type-by-end-user-industry-and-geography-trends-and-forecasts-2017-2022

This market is driven by a number of factors, such as growing consumer electronics industry, high cost of surface finishing, augmented functionality of electronic devices and increasing demand from gaming module industry. However, this market faces certain drawbacks, such as reduction in size of mobile handsets, reduced demand in Japan, and development of non-silicone substitutes. These factors may act as a roadblock to the growth of the market.

The global PCTIM market, based on filler type, can be broadly segmented into Aluminum Oxide, Boron Nitride, Aluminum Nitride, Zinc Oxide and Others. The market has also been divided according to the binder type as paraffin, non-paraffin (organic), eutectic salts, and salt hydrates.

Place Purchase Order for this Report@ http://www.orbisresearch.com/contact/purchase/218305

The market has been geographically segmented into Asia-Pacific, North America, Europe, South America and MEA. In terms of consumption in 2015, APAC led the market with a share of XX.XX%. It was followed by Europe and North America. With the improvement in the financial status of the consumers, the purchasing power of the middle class consumers has increased, which in turn is accelerating the demand for consumer electronics and computers in the Asia-Pacific region, making the region an area of immense potential and opportunities. However, the reducing demand in Japan has considerably hindered the growth of the market in this region.

Some of the major companies dominating this market for its products, services and continuous product developments are 3M, AI Technology, Bergquist Company, Dow Corning Corp., Henkel Corp., Honeywell International Inc., Laird Plc. and Momentive.

Key Deliverables in the Study
• Market analysis for the global phase change thermal interface material market, with region specific assessments and competition analysis on global and regional scales
• Market definition along with the identification of key drivers and restraints
• Identification of factors instrumental in changing the market scenarios, rising prospective opportunities, and identification of key companies that can influence this market on a global and regional scale
• Extensively researched competitive landscape section with profiles of major companies along with their market shares
• Identification and analysis of the macro and micro factors that affect the global phase change thermal interface materials market on both global and regional scales
• A comprehensive list of key market players along with the analysis of their current strategic interests and key financial information
• A wide-ranging knowledge and insights about the major players in this industry and the key strategies adopted by them to sustain and grow in the studied market
• Insights on the major countries/regions in which this industry is blooming and identification of the regions that are still untapped

Table of Content
1. Introduction
1.1 Description
1.2 Research Methodology

2. Executive Summary

3. Phase Change Thermal Interface Material Market
3.1 Current Market Scenario
3.2 Industry Value Chain Analysis
3.3 Technological Snapshot
3.4 Industry Attractiveness Porters 5 Force Analysis

4. Market Dynamics
4.1 Drivers
4.1.1 Growing Consumer Electronics Industry
4.1.2 High Cost of Surface Finishing
4.1.3 Augmented Functionality of Electronic Devices
4.1.4 Increasing Demand from Gaming Module Industry
4.2 Constraints
4.2.1 Reduction in Size of Mobile Handsets
4.2.2 Reduced Demand in Japan
4.2.3 Development of Non-silicone Substitutes
4.3 Opportunities
4.3.1 Replacement of Thermal Greases
4.3.2 Technological Improvements
4.3.3 Use in Notebook Computers
4.3.4 Growing Use in Automotive Industry
4.3.5 Dual Phase Change Thermal Interface Materials

5. Market Segmentation and Analysis
5.1 By Conductive Type
5.1.1 Electrically Conductive
5.1.2 Non-electrically Conductive
5.2 By Binder Type
5.2.1 Paraffin
5.2.2 Non-paraffin (organic)
5.2.3 Eutectic salts
5.2.4 Salt hydrates
5.3 By Filler Type
5.3.1 Aluminum Oxide
5.3.2 Boron Nitride
5.3.3 Aluminum Nitride
5.3.4 Zinc Oxide
5.3.5 Others
5.4 By End-User Industry
5.4.1 Computers Sector
5.4.2 Electrical and Electronics Sector
5.4.3 Telecom Sector
5.4.4 Automotive
5.4.5 Others

6. Regional Market Analysis (Market Size, Growth and Forecast)
6.1 Asia-Pacific
6.1.1 China
6.1.2 India
6.1.3 Japan
6.1.4 South Korea
6.1.5 Australia & New Zealand
6.1.6 Rest of Asia-Pacific
6.2 Europe
6.2.1 Germany
6.2.2 United Kingdom
6.2.3 France
6.2.4 Italy
6.2.5 Rest of Europe
6.3 North America
6.3.1 United States
6.3.2 Canada
6.3.3 Mexico
6.3.4 Others
6.4 South America
6.4.1 Brazil
6.4.2 Argentina
6.4.3 Rest of South America
6.5 Middle-East and Africa
6.5.1 Saudi Arabia
6.5.2 South Africa
6.5.3 Rest of Middle-East and Africa

7. Competitive Landscape
7.1 Mergers & Acquisitions
7.2 Joint Ventures Collaborations and Agreements
7.3 Market Shares Analysis
7.4 Strategies Adopted by Leading Players

8. Future Insights

9. Company Profiles
9.1 3M
9.2 Aavid Thermalloy
9.3 AI Technology
9.4 Arctic Silver
9.5 Bergquist Company
9.6 Dow Corning Corp.
9.7 Enerdyne Thermal Solutions
9.8 Henkel Corp.
9.9 Honeywell International Inc.
9.10 Indium
9.11 Laird Plc
9.12 Momentive
9.13 NuSil Technology
9.14 Parker Chomerics
9.15 Shin-Etsu Chemical
9.16 Stockwell Elastomerics
9.17 T-Global Technology
9.18 Universal Science
9.19 Wakefield-Vette

10. Disclaimer

Orbis Research is a single point aid for all your Market research requirements. We have vast database of reports from the leading publishers and authors across the globe. We specialize in delivering customised reports as per the requirements of our clients. We have complete information about our publishers and hence are sure about the accuracy of the industries and verticals of their specialisation. This helps our clients to map their needs and we produce the perfect required Market research study for our clients.

Hector Costello
Senior Manager – Client Engagements
4144N Central Expressway,
Suite 600, Dallas,
Texas - 75204, U.S.A.
Phone No.: +1 (214) 884-6817; +912064101019
Email ID: sales@orbisresearch.com

This release was published on openPR.