Press release
Thermal Insulation Material Market to Indicate US$ 53,286.8 Million by 2020
PMR indicates steady growth for the global thermal insulation material market over a four-year forecast period, 2016-2020. By 2016 end, the revenues are likely to reach US$ 45.073.8 Mn. The market will observe stable growth at a CAGR of 4.1% during the forecast period. Developing economies will continue to lead the market globally, witnessing strong growth throughout the next four years.Sample of this report is available upon request @ http://www.persistencemarketresearch.com/samples/12946
Rising urbanization and increased manufacturing and construction output levels are the key macroeconomic factors expected to escalate the demand for thermal insulation material. The critical need for thermal insulation in order to maintain any industrial system’s performance will continue to sustain the demand for thermal insulation material. Rising consumption of thermal insulation material by a wide range of verticals, such as oil and gas, energy, petrochemicals, and food and beverages, is projected to escalate the demand. Increasing manufacturing levels of automobiles as well as aircrafts will also accelerate the market.
Growing awareness about the significance of energy conservation and soaring preference for minimum energy spend are expected to accelerate the market growth. Efficient building norms in developed countries as well as emerging regulations regarding efficient building construction in developing countries, will fuel the market further. Governments of emerging economies are increasingly initiating building efficiency norms in order to meet the standards of energy conservation. This will remain a major factor boosting market during the forecast period.
Technological advancements in insulation material, such as high-temperature insulation wool and bio-based insulation material may create lucrative growth opportunities. Moreover, increased emphasis on green energy is expected to benefit the sales of thermal insulation material. Promising introduction of vacuum insulation and nano-insulation will also hold a positive influence on market growth. Low awareness about the usage and expensive costs associated with thermal insulation material are likely to remain the long-term challenges to the market growth.
Based on material type, fiberglass, stone wool, plastic foam, and others constitute the key sub-segments of the market. On the basis of temperature range, the highest growth will be observed in 1°C to 100°C temperature range segment. While this segment is anticipated to expand at a CAGR of 4.6% over 2016-2020, −160°C to −50°C temperature range segment will also register a significant CAGR. This growth is attributed to burgeoning demand from the petrochemicals industry for cryogenic preservation of gas. −490C to 00C temperature range segment will account for over 25% share of the market value in 2020.
Request to view Table of Content @ http://www.persistencemarketresearch.com/market-research/thermal-insulation-material-market/toc
By regional analysis, developing countries in Asia Pacific are identified to remain the largest markets for thermal insulation material. This region will continue to be the largest shareholder with over 45% share in terms of revenues. While Western Europe is another key market, North America is also projected to be a major market by 2020 end.
To Buy Full Report for a Single User @ http://www.persistencemarketresearch.com/checkout/12946
Some of the leading companies in the global thermal insulation material market are Dow Chemicals Company, Saint Gobain S.A., Asahi Kasei Corporation, BASF SE, E. I. du Pont de Nemours and Company, Bayer AG, Kingspan Group, Rockwool International, Owens Corning, and Berkshire Hathaway.
Long-term Outlook: Global thermal insulation material market is predicted to reach a value beyond US$ 53 Bn by 2020 end.
About Us
Persistence Market Research (PMR) is a full-service market intelligence firm specializing in syndicated research, custom research, and consulting services. PMR boasts market research expertise across the Healthcare, Chemicals and Materials, Technology and Media, Energy and Mining, Food and Beverages, Semiconductor and Electronics, Consumer Goods, and Shipping and Transportation industries. The company draws from its multi-disciplinary capabilities and high-pedigree team of analysts to share data that precisely corresponds to clients business needs.
PMR stands committed to bringing more accuracy and speed to clients business decisions. From ready-to-purchase market research reports to customized research solutions, PMRs engagement models are highly flexible without compromising on its deep-seated research values.
Contact Us
Persistence Market Research
305 Broadway
7th Floor, New York City,
NY 10007, United States,
USA - Canada Toll Free: 800-961-0353
Email: sales@persistencemarketresearch.com
media@persistencemarketresearch.com
Web: www.persistencemarketresearch.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Thermal Insulation Material Market to Indicate US$ 53,286.8 Million by 2020 here
News-ID: 558268 • Views: …
More Releases from Persistence Market Research

Plastic Liner Market to Reach US$ 6.67 Bn by 2030, Expanding at 4.7% CAGR - Pers …
➤ Overview of the Market
The global plastic liner market has gained steady traction across multiple industries due to its cost-effectiveness, versatility, and protective characteristics. Plastic liners are widely used in agriculture, mining, construction, waste management, and packaging industries, where they serve as an essential barrier to prevent leakage, contamination, and material loss. These liners are manufactured using materials such as polyethylene (PE), polypropylene (PP), and PVC, offering superior resistance to…

Returnable Plastic Crate Market to Reach US$ 2,665.1 Million by 2030 Fueled by S …
➤ Overview of the Market
The global returnable plastic crate market is gaining momentum as industries seek cost-effective and sustainable packaging solutions. These crates are widely used for transporting and storing perishable goods, beverages, pharmaceuticals, and industrial products due to their durability, stackability, and reusability. The shift from single-use packaging to eco-friendly alternatives has accelerated the adoption of returnable plastic crates across sectors. The market, valued at US$ 1,820.0 million in…

US Thermal Power Market Expected to Reach US$ 251.9 Mn by 2031 with 2.4% CAGR Gr …
➤Overview of the Market
The US thermal power market plays a crucial role in the nation's energy mix, serving as a stable and reliable source of electricity despite the rise of renewables. Thermal power plants in the US rely primarily on coal, natural gas, and oil to generate electricity, with natural gas emerging as the dominant fuel source due to its affordability, efficiency, and lower carbon footprint compared to coal. According…

Europe Medical Plastic Market to Reach US$ 17 Bn by 2032 Driven by Rising Health …
➤Overview of the Market
The Europe medical plastic market is undergoing robust growth, fueled by increasing demand for lightweight, durable, and cost-effective materials in the healthcare sector. Medical plastics are widely used in devices, surgical instruments, diagnostic tools, implants, and packaging due to their high biocompatibility, versatility, and resistance to sterilization methods. With healthcare systems across Europe investing heavily in modernization and patient safety, the adoption of medical-grade plastics has gained…
More Releases for Material
Firestop Material Market
LOS ANGELES, United States: The global Firestop Material market is carefully researched in the report while largely concentrating on top players and their business tactics, geographical expansion, market segments, competitive landscape, manufacturing, and pricing and cost structures. Each section of the research study is specially prepared to explore key aspects of the global Firestop Material market. For instance, the market dynamics section digs deep into the drivers, restraints, trends, and…
New Material Direction for Electric Toothbrushes - Si-TPV Soft Over Molded Mater …
When it comes to factors such as consumer experience or ergonomics, Si-TPV Soft Over Molded Material has had a huge impact on the improvement of various products such as electric toothbrushes, etc. Si-TPV is a Silicone Combine TPU developed and produced by SILIKE, a Thermoplastic Elastomer Manufacturer (Thermoplastic Elastomer Suppliers). Si-TPV material adopts Innovative Soft Slip Technology and Sustainable Overmolding Techniques, which can be used to make Stain Resistance Soft…
A new light on a misjudged material - Plastic waste: material for art
Used plastic bottles are not waste, but a valuable resource. They can be reprocessed in a variety of ways and transformed into new products or fresh energy. And into art. This is exactly what Ve-ronika Richterová does. The Czech artist creates fascinating sculp-tures made out of old PET bottles.
Plastic has inspired artists from the very beginning. The reason: plas-tic meets almost all technical and aesthetic requirements. It is a uni-versal…
Global Thermal Transfer Material Market, Global Thermal Transfer Material Indust …
Thermal conductivity refers as an important characteristic for several manufacturing operations. Thermal transfer properties of a variety of materials are effective in certain applications owing to natural molecular structure that allows for direct heat-transfer. Thermal transfer materials are extensively used to manufacture the heat conductive adhesive tapes, printable products and polymer sheets. These polymer sheets are utilized for barcodes, labeling, and QR code labels for retailing, logistics, and consumer goods.…
The Future of Smart Material Market Runs Through the Material Industry
Smart Materials Market is expected to garner $72.63 billion by 2022, registering a CAGR of 14.9% during the forecast period 2016-2022. Smart materials are adaptive or intelligent materials which pose intrinsic and extrinsic capabilities. These can be altered by external stimuli, such as moisture, temperature, electromagnetic field, and pressure to obtain the desired functional effects. In addition, these materials are dynamic in nature and respond to their immediate interaction environments…
Global Regenerative Artificial Skin Sales Market Research Report 2017 (Temporary …
The report "Global Regenerative Artificial Skin Sales Market Report 2017", has been prepared based on an in-depth market analysis with inputs from industry experts.
This report studies sales (consumption) of Regenerative Artificial Skin in Global market, especially in United States, China, Europe and Japan, focuses on top players in these regions/countries, with sales, price, revenue and market share for each player in these regions, covering
Integra Life Sciences Corporation
Mylan N.V
Johnson & Johnson…