Press release
Thinky ARV-10K Twin planetary mixer from Intertronics - mixing and sub-micron degassing in 20 litre quantities
Thinky ARV-10K Twin planetary mixer from Intertronics
This twin mixer system offers a maximum capacity of 29 kg. The vacuum is applied to the individual containers, reducing the vacuum volume and saving process time when applying and returning to atmospheric pressure. The synergies of planetary centrifugal mixing whilst under vacuum means that no air is added during the mix, and any air in the material is removed down to sub-micron levels. Unlike typical vacuum degassing processes, this happens without concerns about excess foaming and spillage, and in much shorter cycle times. Volatile compounds can be processed without vacuum.
The Thinky ARV-10K Twin is fully programmable, and brings control and consistency to mixing processes where guaranteed uniformity and low tolerance for even micro-bubbles is required. Critical areas include pharmaceutical formulation, fuel cells, batteries, precision composite fabrication, and thermal management materials.
Intertronics are hosting a demonstration unit at their Technology Centre in Oxford for test and evaluation by European customers.
For further information please see www.intertronics.co.uk/thinky-arv10ktwin or visit the Intertronics blog at www.adhere.uk.com – also see www.youtube.com/intertronicsadhere.
"adhere” from Intertronics provides quality adhesive solutions to high technology, high performance assembly industries, incorporating outstanding levels of technical support and customer service.
The adhere concept covers their range of adhesives, encapsulants, coatings, sealants and tapes as well as the associated dispensing, curing and surface preparation equipment and materials used in the manufacturing and assembly processes. Also their Opti-tec brand of adhesives.
Intertronics have been certified to ISO 9001:2008 standard demonstrating their commitment to customer service and quality in delivery. Certification proves that the Intertronics quality management system ensures consistency and a continuous improvement ethic, leading to high levels of performance and customer satisfaction.
Intertronics
Unit 17, Station Field Industrial Estate
Banbury Road
Kidlington
Oxfordshire
OX5 1JD
Tel: 01865 842842
email: info@intertronics.co.uk
www.intertronics.co.uk
blog: www.adhere.uk.com
Press contact: Peter Swanson
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Thinky ARV-10K Twin planetary mixer from Intertronics - mixing and sub-micron degassing in 20 litre quantities here
News-ID: 502005 • Views: …
More Releases from Intertronics
Tidy workplace and precise dispensing results from preeflow® eco-PEN450 for Fra …
Franklin Electric, a leading international manufacturer of water and fuel pumps, faced a difficult challenge when tasked with optimising dispensing processes at their Czech production site.
The objective was to reduce the waste of UV curing material during the application process. Dispensing equipment previously used by Franklin Electric had been very inaccurate, creating unnecessary waste, high material costs and additional cleaning efforts.
After completing preliminary tests, the team at Franklin Electric were…
WACKER ELASTOSIL® N9111 tin free silicone from Intertronics avoids conflicting …
WACKER ELASTOSIL® N9111 from Intertronics is a tin-free single part RTV silicone adhesive sealant, with a neutral cure chemistry, producing a non-corrosive seal that does not inhibit other materials such as platinum cure silicones. This, along with its UL94 V-0 rating, makes it a strong candidate for electronics manufacturing, especially for gap filling, component ruggedisation, and form-in-place gasketing. It is stocked in depth at Intertronics for next-day delivery.
Elastosil N9111 is…
preeflow precision dispensing system from Intertronics improves quality and redu …
The automobile manufacturing industry places high demands on suppliers with regard to process reliability, quality and efficiency. To meet these challenges, a preeflow customer had to optimise his application of a two-part sealant to make a form-in-place (FIP) gasket. In his previous process, the dispensed sealant bead exceeded the tolerance limits at the point where the gasket loop completed and the sealant overlapped itself. In addition, a key process variable…
New guidance from Intertronics – How to specify a dispensing robot to increase …
Automated application of adhesives, potting compounds or encapsulants, sealants, FIP gaskets, temporary masking, lubricants, or other liquids, fluids or pastes provides productivity benefits over manual application, including consistency, speed and accuracy. As selection of a dispensing robot is sometimes a daunting task, Intertronics, a specialist adhesives and dispensing company, has compiled a short piece of guidance on how to specify a dispensing robot. The full guidance can be found on…
More Releases for Thinky
Dental Alginate Mixers Market 2020 Global Demand and Outlook: Dental, Zhermack, …
The global Dental Alginate Mixers Market Research Report 2020-2026 is a valuable source of insightful data for business strategists. It provides the industry overview with growth analysis and historical & futuristic cost, revenue, demand and supply data (as applicable). The research analysts provide an elaborate description of the value chain and its distributor analysis. This Market study provides comprehensive data which enhances the understanding, scope and application of this report.
…
Intertronics - Thinky mixers and precision dosing on show at the Making Pharmace …
The mixing together of liquids, pastes, powders and fillers is a critical process in many sectors, not least in pharmaceutical and cosmetics R&D and production. Getting a fully homogenous bubble-free mix of materials, especially those with different forms or viscosities, is of paramount concern. Speed and repeatability of the process will aid productivity and deliver consistent quality.
On the Intertronics Making Pharmaceuticals stand no. 108 (24-25th April 2018 at Ricoh…
Global Dental Alginate Mixers Market 2017: Zhermack, Dentamerica, Kerr Corporati …
The Market Research Store report offers majority of the latest and newest industry data that covers the overall market situation along with future prospects for Dental Alginate Mixers market around the globe. The research study includes significant data and also forecasts of the global market which makes the research report a helpful resource for marketing people, analysts, industry executives, consultants, sales and product managers, and other people who are in…
Nanoparticle preparation from Intertronics with new Thinky NP-100 Nano Pulverise …
In the impressive world of nanotechnology, getting to even smaller scale is increasingly important. For example, pharmaceutical companies who want their drugs to be faster acting on patients are considering nanoparticle formulation to improve the dissolution rate and solubility of their compounds.
The Thinky NP-100 Nano Pulveriser breaks up particles using impact fragmentation, taking larger particles down to nano-size. In a controlled process taking only minutes, particles in the 10…
Intertronics introduce new nanoparticle deagglomeration technology
The tendency for some nanoparticles to agglomerate or cluster into denser masses can lead to homogeneity and performance issues in their subsequent use. Existing methodologies to de-agglomerate them do not always produce uniform results, or can be invasive and wasteful.
The Thinky PR-1 Nanoparticle Dispersion Machine is a desktop unit which can disperse carbon nanotubes (CNT), graphene and other 2D nanomaterials, within a closed container. The dispersion is very even and…
Mixing silicones for facial and other prosthetics
The manufacture of a medical prosthetic device for a patient’s face or similar area is a highly skilled job; each one is unique, and needs to be handled with great sensitivity, as both functional and cosmetic considerations are involved. It may require careful mixing and colour matching of a silicone moulding compound, with no air entrapment, to ensure appearance and consistency of structure. Jim Dimond, Consultant Clinical Maxillofacial Prosthetist at…
