openPR Logo
Press release

e-con Systems announces launch of PXA270 based System on Module – eSOM270

06-20-2008 04:54 PM CET | IT, New Media & Software

Press release from: e-con Systems Inc.

June 19, 2008, St.Louis, MO - In a move to add more and more pluggable modules to it’s existing line of productized services, e-con Systems Inc., embedded Product Development partner, based out of St. Louis, MO announced the availability of eSOM270, the PXA270 based “system on module”. At volumes of 1K, eSOM270 in the highest configuration(520 Mhz Clock/128M SDRAM/32M flash) is available at USD 110. The eSOM270 is available with PXA270 @ 312/416/520 Mhz, 64/128 MB SDRAM, 16/32 MB NOR flash. eSOM270 is available with Windows CE 5.0/6.0 and Linux support and this module is specially designed for industrial automation/control systems and supports 1.8V ultra low power memory, Power Management IC and an operating temperature between -25 degrees to +70 degrees.

Commenting on the usability of System on modular solutions, Ashok Babu, President mentioned that “Modular solutions are better for customers who would want to have multiple base boards around a single system on module and for customers with low volume requirements below 5K pieces”.

With eSOM270 being the cheapest PXA270 solution, e-con intends to help customers to reduce their overall BOM cost while developing their products.
For more details, please visit

For more information please contact

e-con Systems, Inc
1516 Strawberry Glen Ct
Ballwin, MO 63021
Phone : +1-636-898-8788
Fax : +1 -636-489-1587

About e-con Systems:

e-con Systems is an embedded product development services company focused on end-end product development. e-con Systems has expertise in mobile processors such has PXA270, PXA320, AU1250 and has been using its product engineering services to help customers on development of products such as digital picture frames, point of sale terminals, handheld single board computers etc.
Besides this, e-con provides systems integration services such as Windows CE or Linux BSP porting solutions and device driver development. Also e-con’s design services have been used by customers across the globe for hardware design of their products.

This release was published on openPR.

Permanent link to this press release:

Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release e-con Systems announces launch of PXA270 based System on Module – eSOM270 here

News-ID: 47276 • Views:

More Releases from e-con Systems Inc.

e-con Systems™ Launches Multi-camera Solution for NVIDIA Jetson AGX Orin Based …
San Jose and Chennai (June 21, 2022) - e-con Systems™, a leading embedded OEM camera company and an NVIDIA Elite Partner, today launched the e-CAM82_CUOAGX - a 4K ultra-low-light camera powered by the NVIDIA® Jetson AGX Orin™ system-on-a-module and based on the Sony STARVIS IMX485 sensor. The product will be officially launched at Embedded World 2022, to be held at the Exhibition Centre in Nuremberg, Germany, from June 21st to
e-con Systems™ launches a Time of Flight (ToF) camera for accurate 3D depth me …
DepthVista is a high-resolution depth camera that is capable of capturing 640×480 depth maps at a frame rate of 30 fps. This allows autonomous mobile robots and guided vehicles to perceive their environment and navigate safely. One of the notable features of DepthVista is that it does not require ambient illumination for optimal performance, making it suitable for systems operating in low light or even complete darkness. Furthermore, the depth
e-con Systems™ launches a ready to deploy AI vision kit with e-con's Sony IMX4 …
qSmartAI80_CUQ610 is an AI vision kit comprising of e-con's 4K MIPI low light camera module,VVDN's SoM based on Qualcomm QCS610 SoC, and a carrier board. The 4K camera module is based on the Sony STARVIS™ IMX415 ultra low light sensor which helps in delivering exceptionally clear images even at low light conditions. Also, this kit is engineered to enable powerful computing for on-device image processing with exceptional power and
e-con Systems™ launches SONY based 8 MP, UVC USB camera with High Dynamic Rang …
e-con Systems™, a leading embedded camera company, launches e-CAM83_USB, an 8 MP color UVC compliant USB 2.0 high-speed camera with dual stream support and High Dynamic Range. e-CAM83_USB is based on Sony’s IMX317, a 1/2.5" sensor. The dual stream capability of this 4K HDR USB camera allows it to receive two streams with different resolutions simultaneously. e-CAM83_USB also comes with the High Dynamic Range feature that helps

All 5 Releases

More Releases for PXA270

e-con Systems Announces Ångström Distribution for its Development Boards
St. Louis, USA/Chennai, India – September 8th 2010 e-con Systems Inc., an embedded Product Development partner, based in St. Louis, MO and Chennai, India announced its support for Ångström distribution on its Development Boards. Ångström is the future for the world of machines and highly portable and reconfigurable core, built using the OpenEmbedded build system. It is intended to run on all devices with a 2.6.x kernel OpenEmbedded supports, with special attention
e-con Systems announces e-CAM’s availability with 3.2 Megapixel CMOS image sen …
Adding to its existing line of Camera Solutions, e-con Systems a leading product development services company based out of St Louis, USA & Chennai, India announced the availability of 3 Mega pixel camera sensor with e-CAM – the widely known Plug and Play camera solution for embedded platforms. The 3 Mega pixel camera module is based on Omnivision OV3640 sensor. Capturing pictures at low light conditions require longer exposure times
e-con Systems releases Base Board for eSOM270 - PXA270 based Computer on Module
Oct 10’ 2008; St Louis, USA/Chennai, India - e-con Systems has announced base board for it's system on module, eSOM270. The base board has two USB host ports, one USB client port, one SDIO interface, 3 serial ports, camera interface, LCD and touch screen. The display can be a 3.5”(QVGA) or a 5.7” one. e-con Systems Inc., an embedded Product Development partner, based out of St. Louis, MO and Chennai, India
e-con System announce Windows CE 6.0 R2 support for PXA270 reference platfrom SI …
e-con Systems Inc., a leading Embedded Design Services company based out of St Louis, USA & Chennai, India announced e-con announces support of Windows CE 6.0 R2 on its PXA270 reference design - Sirius. The Sirius reference design is e-con’s flagship product which is based on PXA270 processor and can be used as a development kit for multiple purposes incl. Customized Product design, establishing POC (proof of concept), R&D, Application
Speeding up the time to market with PXA270 reference design & Add on Modules
In this period of economic slowdown, where OEMs are looking for solutions which could speed up their product design, e-con Systems, an embedded product design services specialist, has come up with a host of add-on modules on top of its PXA270 reference design, SIRIUS. The company feels that these add on modules could save valuable time for the OEM, who otherwise would be spending considerable time in developing and testing
e-con Slashes prices for Windows CE 6.0 BSP for PXA270 Development Kit SIRIUS
e-con Systems, Embedded Design Services company based out of Chennai, and offices in St. Louis, USA has announced price reductions on Windows CE 6.0 BSP for its PXA270 Development Kit SIRIUS. Windows CE BSP for SIRIUS along with the source code was available for US $ 2499 and e-con has slashed this price by 20%. “Windows CE 6.0 has been widely adopted by everyone and hence the support requests from the