Thickness Control in Tape Casting for AlN/Si3N4 Ceramic Substrate Manufacturing

In the fabrication of AlN/Si3N4 Ceramic substrate [https://www.dron-tech.com/news/thickness-control-in-tape-casting-for-aln-si3n4-ceramic-substrate-manufacturing/]s, tape casting stands as a pivotal process, especially when it comes to thickness control. Precise thickness management directly impacts the substrate's performance in applications like electric vehicles (EVs) and 5G devices. Here's how it's achieved.

Image: https://ecdn6-nc.globalso.com/upload/p/2231/image_other/2025-08/tape-casting.jpg

1. Technical Fundamentals of Thickness Control1.1 Slurry Properties Optimization

* Solid Loading Precision: High-solid slurries (e.g., 60 vol% AlN) require meticulous viscosity control, typically within 500 - 2000 cP. Adjusting dispersant dosage and ball-milling duration fine-tunes the slurry's flowability. A 1% variation in solid loading can expand thickness tolerance by plus-minus 3m.
* Solvent System Design: A mixed solvent (e.g., ethanol-toluene) with distinct boiling points enables controlled evaporation. Advanced systems maintain solvent evaporation rates within plus-minus 2% fluctuations, preventing thickness expansion during drying.

1.2 Precision Equipment Design

Control Aspect

Traditional Limitations

Advanced Solutions

Gap Adjustment

plus-minus 5m (mechanical screw)

plus-minus 1.5m (laser - servo )

Web Tension Stability

Fluctuation >2N (roller - driven)

Temperature Uniformity

T plus-minus 3 (single - zone heating)

T plus-minus 1 (multi - zone IR + N purge)

Slurry Feeding

Manual adjustment (laggy)

Closed - loop control (pump + sensor)

2. Key Technological Innovations2.1 Laser - Guided Closed - Loop System

Dual - wavelength laser gauges (1000Hz sampling) continuously monitor wet film thickness. A PID algorithm instantly adjusts the casting gap, responding within 50ms. This ensures thickness variations stay minimal, critical for applications demanding tight tolerances.

2.2 Magnetic Levitation Web Support

Traditional roller systems cause periodic thickness fluctuations. Magnetic levitation arrays eliminate contact stress, maintaining web tension stability. Combined with high - precision tension sensors (0.1N accuracy), this technology controls thickness fluctuations within plus-minus 0.5m, meeting strict flatness requirements for direct - bonded copper (DBC) processes.

2.3 Intelligent Process Database

Pre - loaded with over 100 sets of material - process parameters, the system auto - selects optimal casting settings for different AlN/Si3N4 formulations. When powder particle size changes, the system automatically adjusts key parameters to keep thickness tolerance within plus-minus 1%.

Image: https://ecdn6-nc.globalso.com/upload/p/2231/image_other/2025-08/intelligent-process-database.jpg

3. Industry Standards and Performance Metrics

Metric

Conventional Equipment

Advanced Equipment

Thickness Tolerance

plus-minus 3m

plus-minus 1.5m

Inter - batch Consistency

less than or equal to 2%

less than or equal to 1.2%

Large - area Uniformity (300mm)

Edge - center h plus-minus 5m

Edge - center h plus-minus 2m

In summary, thickness control in tape casting hinges on synergizing material science, equipment innovation, and intelligent algorithms. These advancements enable the production of high - performance ceramic substrates, meeting the stringent demands of modern electronics.

Media Contact
Company Name: Zhejiang Dron Technology Co., Ltd.
Email:Send Email [https://www.abnewswire.com/email_contact_us.php?pr=thickness-control-in-tape-casting-for-alnsi3n4-ceramic-substrate-manufacturing]
Country: China
Website: https://www.dron-tech.com/

Legal Disclaimer: Information contained on this page is provided by an independent third-party content provider. ABNewswire makes no warranties or responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you are affiliated with this article or have any complaints or copyright issues related to this article and would like it to be removed, please contact retract@swscontact.com



This release was published on openPR.