Brushed DC Motor for Automotive Industry Analysis: the global market size is projected to reach USD 13.78 billion by 2032

QY Research Inc. (Global Market Report Research Publisher) announces the release of 2025 latest report "Brushed DC Motor for Automotive- Global Market Share and Ranking, Overall Sales and Demand Forecast 2026-2032". Based on current situation and impact historical analysis (2020-2024) and forecast calculations (2026-2032), this report provides a comprehensive analysis of the global Brushed DC Motor for Automotive market, including market size, share, demand, industry development status, and forecasts for the next few years.

The global market for Brushed DC Motor for Automotive was estimated to be worth US$ 11676 million in 2025 and is projected to reach US$ 13780 million, growing at a CAGR of 2.4% from 2026 to 2032.

【Get a free sample PDF of this report (Including Full TOC, List of Tables & Figures, Chart)】
https://www.qyresearch.com/reports/5786684/brushed-dc-motor-for-automotive



1. Product Definition and Core Technology

Brushed DC motors for automotive applications are typically based on permanent magnet DC architectures, utilizing brushes and commutators for mechanical commutation. Operating within 12V or 24V low-voltage electrical systems, these motors deliver stable, controllable torque and speed characteristics. They are widely deployed in non-drive and non-high-voltage automotive actuator applications, including windshield wipers, power window regulators, door lock and handle mechanisms, mirror adjustment and folding systems, seat adjustment and comfort modules, electric sliding doors and tailgate actuators, as well as blower and flap actuators in HVAC systems.

2. Market Size and Growth Trajectory

The global Brushed DC Motor for Automotive market demonstrates stable, sustained demand, projected to reach USD 13.78 billion by 2032, with a compound annual growth rate of 2.41% during the forecast period. This steady growth reflects the enduring role of brushed motors in cost-sensitive automotive actuator applications, balanced against increasing adoption of brushless alternatives in certain vehicle segments.

3. Competitive Landscape

The market exhibits significant consolidation, with the top five global players accounting for approximately 57.4% of market revenue in 2025. Key manufacturers include Johnson Electric, Mabuchi Motors, NIDEC, Denso, Bosch, Valeo, Brose, Shenghuabo, Mitsuba, and MinebeaMitsumi. These established suppliers maintain competitive advantages through extensive manufacturing scale, long-standing relationships with Tier-1 automotive suppliers and OEMs, and proven quality and reliability records across multiple vehicle platforms.

4. Technical Characteristics and Value Proposition

From a technical perspective, brushed DC motors offer several advantages that sustain their market position. Their mature design and manufacturing processes enable consistent quality and cost efficiency. Fast response characteristics and strong low-speed torque capabilities make them particularly suitable for actuator applications requiring precise positioning and reliable operation. Simple control requirements reduce electronic content and system complexity. Compatibility with existing low-voltage vehicle electrical architectures facilitates platform-based deployment across multiple vehicle models and long-term mass production. While brushless motors are increasingly adopted in high-end or long-life applications, brushed DC motors retain competitive advantages in cost-sensitive actuator systems with defined duty cycles and predictable load profiles.

5. Value Chain Analysis

Upstream Materials and Components: The upstream segment encompasses electrical steel laminations for stator and rotor cores, enameled copper wire and terminals for windings, carbon brushes and commutator assemblies (primarily copper or copper alloys), permanent magnets (mainly ferrite with selective use of rare-earth materials), bearings and lubricants, engineering plastics including PBT and PA for housings and components, and die-cast or stamped metal components. Automotive-grade requirements place strong emphasis on material consistency, wear resistance, and long-term supply stability to meet OEM quality and reliability standards.

Midstream Manufacturing: Manufacturing processes focus on automated winding to ensure consistent coil geometry, rotor balancing to minimize vibration, commutator assembly with precise brush alignment, endurance testing to validate performance under simulated operating conditions, and in-line inspection to ensure quality consistency and yield across high-volume production. Process control and traceability are essential for meeting automotive industry quality standards.

Downstream Customers and Applications: Downstream customers are primarily Tier-1 suppliers and module integrators serving OEMs, covering door systems, seating systems, thermal management and HVAC modules, and wiper systems. Brushed DC motors are typically integrated into functional modules and sourced through long-term platform nominations, resulting in stable volume commitments over vehicle lifecycles. In addition, the global aftermarket provides ongoing replacement demand as motors reach end-of-life in existing vehicles, contributing to overall market resilience.

6. Market Dynamics and Future Outlook

Despite ongoing vehicle electrification and increased adoption of brushless motor solutions in certain applications, brushed DC motors are expected to retain a stable role in cost-sensitive, high-reliability automotive actuators. Several factors support this sustained relevance:

Cost Efficiency: Brushed motor architectures offer lower material and manufacturing costs compared to brushless alternatives, making them preferred for applications where performance requirements align with brushed motor capabilities and where higher cost cannot be justified.

Established Supply Chains: Decades of manufacturing scale and supply chain optimization have created highly efficient production networks capable of delivering high volumes with consistent quality, creating barriers for alternative technologies in cost-sensitive segments.

Continuous Performance Improvements: Ongoing developments in materials, structural optimization, service life extension, and noise and vibration performance are extending the relevance of brushed motors. Improved brush materials, commutator designs, and bearing technologies enhance durability and reduce maintenance requirements.

Application Suitability: For actuator applications with defined duty cycles, predictable load profiles, and moderate life requirements, brushed motors provide adequate performance without the added complexity and cost of brushless alternatives.

The industry will continue evolving toward improved durability, reduced noise and vibration, and enhanced efficiency while maintaining cost competitiveness. Continuous improvements in materials, structural optimization, and manufacturing processes will extend the service life and performance envelope of brushed motors. The technology is expected to coexist with brushless solutions across a wide range of automotive applications, with market segmentation based on performance requirements, cost sensitivity, and vehicle platform positioning. Suppliers capable of maintaining quality consistency, manufacturing efficiency, and close collaboration with Tier-1 module integrators will sustain market leadership as the automotive industry continues its gradual electrification transition.



The report provides a detailed analysis of the market size, growth potential, and key trends for each segment. Through detailed analysis, industry players can identify profit opportunities, develop strategies for specific customer segments, and allocate resources effectively.

The Brushed DC Motor for Automotive market is segmented as below:
By Company
Denso
Johnson Electric
NIDEC
Bosch
Mitsuba
Brose
Mabuchi Motors
Shenghuabo
Valeo
DY Corporation
MinebeaMitsumi
Keyang Electric Machinery
Bühler Motor
Igarashi Motors India
Kitashiba Electric
Ningbo Jingcheng
Jiangsu Leili
Ningbo Hengshuai
Dongguan VIDE Technology
Changzhou Haosheng Motor
Changzhou 3X Motion Technologies
Shenzhen Power Motor Industrial

Segment by Type
Body and Comfort Systems
HVAC and Thermal Management
Powertrain Auxiliary
Others

Segment by Application
Passenger Car
Commercial Vehicle

Each chapter of the report provides detailed information for readers to further understand the Brushed DC Motor for Automotive market:

Chapter 1: Introduces the report scope of the Brushed DC Motor for Automotive report, global total market size (valve, volume and price). This chapter also provides the market dynamics, latest developments of the market, the driving factors and restrictive factors of the market, the challenges and risks faced by manufacturers in the industry, and the analysis of relevant policies in the industry. (2021-2032)
Chapter 2: Detailed analysis of Brushed DC Motor for Automotive manufacturers competitive landscape, price, sales and revenue market share, latest development plan, merger, and acquisition information, etc. (2021-2026)
Chapter 3: Provides the analysis of various Brushed DC Motor for Automotive market segments by Type, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different market segments. (2021-2032)
Chapter 4: Provides the analysis of various market segments by Application, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different downstream markets.(2021-2032)
Chapter 5: Sales, revenue of Brushed DC Motor for Automotive in regional level. It provides a quantitative analysis of the market size and development potential of each region and introduces the market development, future development prospects, market space, and market size of each country in the world..(2021-2032)
Chapter 6: Sales, revenue of Brushed DC Motor for Automotive in country level. It provides sigmate data by Type, and by Application for each country/region.(2021-2032)
Chapter 7: Provides profiles of key players, introducing the basic situation of the main companies in the market in detail, including product sales, revenue, price, gross margin, product introduction, recent development, etc. (2021-2026)
Chapter 8: Analysis of industrial chain, including the upstream and downstream of the industry.
Chapter 9: Conclusion.

Benefits of purchasing QYResearch report:

Competitive Analysis: QYResearch provides in-depth Brushed DC Motor for Automotive competitive analysis, including information on key company profiles, new entrants, acquisitions, mergers, large market shear, opportunities, and challenges. These analyses provide clients with a comprehensive understanding of market conditions and competitive dynamics, enabling them to develop effective market strategies and maintain their competitive edge.

Industry Analysis: QYResearch provides Brushed DC Motor for Automotive comprehensive industry data and trend analysis, including raw material analysis, market application analysis, product type analysis, market demand analysis, market supply analysis, downstream market analysis, and supply chain analysis.

and trend analysis. These analyses help clients understand the direction of industry development and make informed business decisions.

Market Size: QYResearch provides Brushed DC Motor for Automotive market size analysis, including capacity, production, sales, production value, price, cost, and profit analysis. This data helps clients understand market size and development potential, and is an important reference for business development.

Other relevant reports of QYResearch:
Global Brushed DC Motor for Automotive Market Outlook, InDepth Analysis & Forecast to 2032
Global Brushed DC Motor for Automotive Market Research Report 2026
Global Brushed DC Motor for Automotive Sales Market Report, Competitive Analysis and Regional Opportunities 2026-2032

About Us:
QYResearch founded in California, USA in 2007, which is a leading global market research and consulting company. Our primary business include market research reports, custom reports, commissioned research, IPO consultancy, business plans, etc. With over 19 years of experience and a dedicated research team, we are well placed to provide useful information and data for your business, and we have established offices in 7 countries (include United States, Germany, Switzerland, Japan, Korea, China and India) and business partners in over 30 countries. We have provided industrial information services to more than 60,000 companies in over the world.

Contact Us:
If you have any queries regarding this report or if you would like further information, please contact us:
QY Research Inc.
Add: 17890 Castleton Street Suite 369 City of Industry CA 91748 United States
EN: https://www.qyresearch.com
Email: global@qyresearch.com
Tel: 001-626-842-1666(US)
JP: https://www.qyresearch.co.jp

This release was published on openPR.