Press release
How to Check the "Cutting Edge" After a Tungsten Carbide Blades are Made
I. What Tools or equipment Are Used for Inspection?
1. "Extension of the Eyes" - Optical Magnifiers:
Tools: Bench magnifiers, illuminated magnifiers, stereomicroscopes.
What they're for: This is the most common, first-step inspection. Just like using a magnifying glass to examine an antique, it magnifies the cutting edge several times to several dozen times to check for obvious "wounds" on a macro level.
2."Precision Ruler" - Profilometer/Surface Roughness Tester:
Tools: Specialized tool profilometers (with a precision probe).
What they're for: This one is impressive. It doesn't rely on sight. Instead, an ultra-fine probe gently traces along the cutting edge, mapping it out like drawing a map, and generates a precise computer image of the edge's exact shape and smoothness. Whether the rake angle, clearance angle, and edge radius meet the design specifications is revealed instantly.
3. "Super Microscope" - Electron Microscope:
Tools: Scanning Electron Microscope (SEM).
What they're for: Used when you need to "solve a mystery," to find extremely tiny (nanoscale) defects or coating issues. It sees in extreme detail, revealing the microscopic world invisible to ordinary microscopes.
II. What Possible Flaws We should pay attention to?During inspection, just like looking for smudges on a face, focus mainly on these types of "flaws":
1. Chips/Edge Breaks:
They look like: Small, irregular notches on the cutting edge, as if chipped off by a tiny stone. This is the most obvious defect.
Why it is not good: They will leave raised marks or scratches on the workpiece surface during machining and cause the tool itself to degrade rapidly.
2. Micro-chipping/Serrated Edge:
What they are: Under the microscope, the edge appears uneven, like tiny serrations. Less obvious than large chips, but very common.
Why they're bad: Affects cutting sharpness and finish quality, accelerating tool wear.
3. Coating Defects:
They shows: Tools usually have a super-hard coating (like non-stick pan coating). Defects may include peeling, bubbling, uneven color, or incomplete coverage (exposing the yellowish tungsten carbide underneath).
Why they sucks: The coating is the "protective suit." Areas with defects will wear out first, causing the tool to fail prematurely.
4. Uneven Edge/ Burrs:
What they look like: The edge radius or chamfer is uneven-wider in some spots, narrower in others; or there are tiny material overhangs (burrs).
Why it bad: Affects the stability of cutting forces and chip evacuation, reducing machining precision.
5. Cracks:
What they look like: Hairline lines appearing on or near the cutting edge. This is a very dangerous defect.
Why they're bad: Under cutting forces, cracks can easily propagate, leading to sudden tool breakage, which is very hazardous.
About Huaxin: Tungsten Carbide Cemented Slitting Knives Manufacturer
CHENGDU HUAXIN CEMENTED CARBIDE CO.,LTD are a professional supplier and manufacturer of tungsten carbide products, such as carbide insert knives for woodworking, carbide circular knives for tobacco&cigarette filter rods slitting, round knives for corugatted cardboard slitting ,three hole razor blades/slotted blades for packaging, tape, thin film cutting, fiber cutter blades for textile industry etc.
With over 25 years development, our products have been exported to U. S. A, Russia, South America, India, Turkey, Pakistan, Australia, Southeast Asia etc. With excellent quality and competitive prices, Our hard working attitude and responsiveness are approved by our customers. And we would like to establish new business relationships with new customers. Contact us today and you will enjoy benefits of good quality and services from our products!
The high performance tungsten carbide industrial blades products
Image: https://www.huaxincarbide.com/uploads/fiber-cutting-blades.png
Staple fiber cutter blade
Image: https://www.huaxincarbide.com/uploads/Circular-knives-for-cigarette-filter-slitting.png
Circular knives for cigarette filter slitting
Image: https://www.huaxincarbide.com/uploads/%CF%86260X%CF%86158X1.5-8-holes1.png
Circular knives for corrugated packaging industry [https://www.huaxincarbide.com/circular-knives-for-corrugated-packaging-industry-product/]
Image: https://www.huaxincarbide.com/uploads/huaxin-woodworking-carbide-blades.png
Carbide blades for woodworking [https://www.huaxincarbide.com/tungsten-carbide-knives-for-planers/]
Image: https://www.huaxincarbide.com/uploads/3-hole-slotted-double-edege-blades.png
Carbide blades for tape, thin film industry [https://www.huaxincarbide.com/carbide-blades-for-tapethin-film-industry/]
Image: https://www.huaxincarbide.com/uploads/Utility-Knife-Blades.png
utility knife
Custom Service
Huaxin Cemented Carbide manufactures custom tungsten carbide blades, altered standard and standard blanks and preforms, starting from powder through finished ground blanks. Our comprehensive selection of grades and our manufacturing process consistently delivers high-performance, reliable near-net shaped tools that address specialized customer application challenges across diverse industries.
Tailored Solutions for Every Industrycustom-engineered bladesLeading manufacturer of industrial blades
Click to contact for custom industrial knives [https://www.huaxincarbide.com/contact-us/]
Follow us: to get Huaxin's industrial blades products releases
Customer common questions and Huaxin answersWhat is the delivery time?
What is the delivery time for custom-made knives?
What payment methods do you accept?
About custom sizes or specialized blade shapes?
Sample or test blade to ensure compatibilityStorage and Maintenance
Media Contact
Company Name: Chengdu HUAXIN cemented carbide Co., Ltd
Email:Send Email [https://www.abnewswire.com/email_contact_us.php?pr=how-to-check-the-cutting-edge-after-a-tungsten-carbide-blades-are-made]
Country: China
Website: https://www.huaxincarbide.com/
Legal Disclaimer: Information contained on this page is provided by an independent third-party content provider. ABNewswire makes no warranties or responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you are affiliated with this article or have any complaints or copyright issues related to this article and would like it to be removed, please contact retract@swscontact.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release How to Check the "Cutting Edge" After a Tungsten Carbide Blades are Made here
News-ID: 4307861 • Views: …
More Releases from ABNewswire
Why Is Pentavitin a Game-Changer for Long-Lasting Moisturization?
What Is Pentavitin [https://www.aogebio.com/saccharide-isomerate-pentavitin-product/], Exactly?
Pentavitin [https://www.aogebio.com/saccharide-isomerate-pentavitin-product/]is a 100% natural, plant-derived carbohydrate complex, with its INCI name listed as Saccharide Isomerate. It is produced through the isomerization of D-glucose from plant sources, resulting in a blend of sugars-primarily glucose and fructose-that is structurally identical to the carbohydrates found in the skin' s Natural Moisturizing Factor (NMF). The NMF is the skin' s built-in hydration system, composed of water-soluble compounds that attract…
Primior Sees Rising Institutional and Family Office Demand for Hogar Square Deve …
Primior Holdings reports growing institutional and family office interest in the Hogar Square multifamily development, a 130-unit project positioned for competitive risk-adjusted returns as construction markets tighten heading into 2026. Six investor groups are evaluating allocations, including domestic and international capital. The project aligns with Primior's broader strategy of structured real estate investments supported by its Gaia platform.
Las Vegas, Nevada - Primior Holdings (OTCMKT: GRLT) [https://primior.com/] today announced growing institutional…
A Complete Guide: When Do Users Need a Mobile Cold Room Instead of a Fixed One?
In the fast-evolving landscape of cold chain logistics, businesses often face a pivotal decision: commit to a permanent fixed cold storage facility or leverage the flexibility of a mobile cold room solution. This practical guide clarifies key scenarios in which opting for a mobile cold room delivers smarter operational and strategic value.
Core Distinctions
A fixed cold room is a permanent installation, integrated into a building's structure. It requires substantial construction, permits,…
How to Leverage Gimbal Camera for Resource Exploration
Image: https://www.viewprouav.com/uploads/%E6%B5%8B%E7%BB%981.jpg
Gimbal Camera technology is playing an increasingly important role in resource exploration, especially in industries such as mining, oil, and natural gas. By being mounted on drones, helicopters, or other aerial platforms, Gimbal Cameras utilize their stable imaging capabilities and high-resolution image capture to provide precise real-time data support for resource exploration. Below are the main applications of Gimbal Camera in resource exploration:
1. Geological Structure and Terrain Analysis
Gimbal Camera,…
More Releases for Carbide
Repair of Tungsten Carbide Cemented Carbide Tools?
Repair of Tungsten Carbide Cemented Carbide Tools
After a period of use, a customer's blade has developed some flaws that are affecting production quality and speed. What can be done now?
Can Tungsten Carbide Blades be refurbished if problems occur?
The answer is definitely yes, they can be refurbished. During refurbishment, the following situations may be addressed:
1. Surface Treatment
What surface problems can occur?
Flaws, cracks. Examples: scratches, minor wear, coating peeling.
These issues can be…
Repair of Tungsten Carbide Cemented Carbide Tools?
Repair of Tungsten Carbide Cemented Carbide Tools
After a period of use, a customer's blade has developed some flaws that are affecting production quality and speed. What can be done now?
Can Tungsten Carbide Blades be refurbished if problems occur?
The answer is definitely yes, they can be refurbished. During refurbishment, the following situations may be addressed:
1. Surface Treatment
What surface problems can occur?
Flaws, cracks. Examples: scratches, minor wear, coating peeling.
These issues can be…
Repair of Tungsten Carbide Cemented Carbide Tools?
Repair of Tungsten Carbide Cemented Carbide Tools
After a period of use, a customer's blade has developed some flaws that are affecting production quality and speed. What can be done now?
Can Tungsten Carbide Blades be refurbished if problems occur?
The answer is definitely yes, they can be refurbished. During refurbishment, the following situations may be addressed:
1. Surface Treatment
What surface problems can occur?
Flaws, cracks. Examples: scratches, minor wear, coating peeling.
These issues can be…
Repair of Tungsten Carbide Cemented Carbide Tools?
Repair of Tungsten Carbide Cemented Carbide Tools
After a period of use, a customer's blade has developed some flaws that are affecting production quality and speed. What can be done now?
Can Tungsten Carbide Blades be refurbished if problems occur?
The answer is definitely yes, they can be refurbished. During refurbishment, the following situations may be addressed:
1. Surface Treatment
What surface problems can occur?
Flaws, cracks. Examples: scratches, minor wear, coating peeling.
These issues can be…
Repair of Tungsten Carbide Cemented Carbide Tools?
Repair of Tungsten Carbide Cemented Carbide Tools
After a period of use, a customer's blade has developed some flaws that are affecting production quality and speed. What can be done now?
Can Tungsten Carbide Blades be refurbished if problems occur?
The answer is definitely yes, they can be refurbished. During refurbishment, the following situations may be addressed:
1. Surface Treatment
What surface problems can occur?
Flaws, cracks. Examples: scratches, minor wear, coating peeling.
These issues can be…
Repair of Tungsten Carbide Cemented Carbide Tools?
Repair of Tungsten Carbide Cemented Carbide Tools
After a period of use, a customer's blade has developed some flaws that are affecting production quality and speed. What can be done now?
Can Tungsten Carbide Blades be refurbished if problems occur?
The answer is definitely yes, they can be refurbished. During refurbishment, the following situations may be addressed:
1. Surface Treatment
What surface problems can occur?
Flaws, cracks. Examples: scratches, minor wear, coating peeling.
These issues can be…
