Semiconductor Inspection Systems Market - Growing Complexity Of The Process And Design Of Semiconductor Chip Aides To Growth

Various Kinds of Inspection are required in semiconductor industry production line: on-line inspection, critical dimension-measurement, and in-line inspection. Semiconductor Inspection System is the equipment used in manufacturing process of semiconductor device to detect the failure. Complete development of semiconductor device involves large manufacturing process. A failure at one step of the process, means to interrupt the subsequent step to avoid production of defective product. Hence insertion of inspection systems at the pivotal points of the process will ensure process moves to next step after confirming no defect at current step. Otherwise the production is interrupted if failure in the device is detected and the cause is determined followed by defect removal. Once the defect is sufficiently removed, the process is advanced to the next step in the process. Main defects in the semiconductor manufacturing process are pattern defects and small particles on semiconductor wafer.

PDF Sample For Full Details with Upcoming Advancements @ http://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=15788

Semiconductor Inspection System detects both the pattern defects and physical defects (foreign substances like particles) by obtaining the coordinates(X, Y) of the defect’s position. Determining position (Coordinates) on the wafer is the primary role of the Semiconductor Inspection System. Inspection can be done on both patterned and bare wafer. Inspection systems for patterned and non-patterned wafer have different configurations. Based on configuration patterned inspection systems are categorized as bright field, electron beam, and dark field inspection systems. Non-patterned inspection system is used in equipment check by dummy wafers for cleanliness monitoring of the equipment. Physical Defects that are caused by foreign particle are called random defects as their position (i.e. coordinates) cannot be determined. On the other hand systematic defects are the defects which are result of exposure and conditions of the mask. They occur at the same position and hence are detectable by the inspection systems. These inspection systems are hence indispensable to maintain production yield of semiconductors.

Rise in demand for high performing and low cost semiconductors will augment the use of inspection systems. Growing complexity of the process and design of semiconductor chip is also significant factor in growth of the market for semiconductor inspection systems. Increasing demand for notebooks, gaming consoles, smartphones, tablets, network switches, digital cameras, and set-top boxes will propel the requirement of foundries. Increasing proliferation of loT (Internet of Things) is also the growth driver. Rising need of semiconductor memory devices like 3D NAND and DRAM is also attributed to growth of the market. The main challenge posed to the industry is introduction of multi-layer wiring and planarization process in manufacturing of semiconductor devices which existing inspection systems are incapable to detect.

The market can be segmented based on the type (wafer inspection system & mask inspection system), by technology (optical and e-beam), by end-users (memory manufacturer, IDMs, and foundries), and by geography. Wafer Inspection systems will continue to dominate the market. Also Foundries occupy the largest market share.

APAC is the major revenue-generating market for Semiconductor Inspection Systems. Increasing domestic IC production in this region is the key factor for growing demand in this market. India, Nepal, Bangladesh, and Thailand are the major markets in APAC. However North America has the largest market for the Semiconductor Inspection Systems followed by U.S. and Canada. The second largest market for Semiconductor Inspection Systems is APAC. Europe has seen a moderate growth in terms of Semiconductor Inspection Systems. Germany, being the largest electronics manufacturer and automotive hub, contributes immensely to the Semiconductor Inspection Systems in Europe market. Strong acquisitions and mergers strategies by semiconductor vendors will drive growth in the Europe market.

Market Insight can be Viewed @ http://www.transparencymarketresearch.com/semiconductor-inspection-systems-market.html

Key players in the Semiconductor Inspection Systems market are KLA-Tencor, Applied Materials, Hermes Microvision, and Lasertech. Other vendors include ASML Holding, JEOL, Carl Zeiss, Hitachi High-Technologies, Nikon, Nanometrics, Lam Research, Planar Corporation, Rudolph Technologies, Toray Engineering, and Tokyo Seimitsu.

Transparency Market Research (TMR) is a global market intelligence company, providing global business information reports and services. Our exclusive blend of quantitative forecasting and trends analysis provides forward-looking insight for thousands of decision makers. TMR’s experienced team of Analysts, Researchers, and Consultants, use proprietary data sources and various tools and techniques to gather and analyze information.

Transparency Market Research
90 Sate Street, Suite 700
Albany, NY 12207
Tel: +1-518-618-1030
USA - Canada Toll Free: 866-552-3453
Email: sales@transparencymarketresearch.com
Website: http://www.transparencymarketresearch.com

This release was published on openPR.