Turbine Inlet Cooling Systems
The report on the turbine inlet cooling systems market primarily focuses on inlet fogging, mechanical chillers, and wet compression technologies. Of the three technologies, mechanical chillers is more common and is utilized in a large number of gas turbines worldwide. Companies such as Mee Industries Inc. and Caldwell Energy have pioneered the inlet cooling technology and provide complete inlet cooling packages to augment plant output. Increasing incidents of power shortages due to the drop in turbine efficiencies, especially during the summer season, compel power companies to install turbine inlet cooling systems.
Get PDF Brochure for more Professional and Technical insights :
The number of mechanical chiller systems is further expected to grow on account of increasing adoption of gas-fired power plants globally. As the number of gas-fired power plants increases, the demand for gas turbine and hence gas turbine inlet cooling systems would increase. The installation of turbine inlet cooling systems assists plant owners/operators to augment plant output.
Mechanical chillers is one of the most efficient as well as expensive turbine inlet cooling technologies. They can attain a temperature drop in inlet air of about 45°F, which is higher than most of the available technologies. A mechanical chiller consists of a compressor that works on steam turbine, natural gas engine, or electric motor. Chiller systems may come with a thermal energy storage tank for chilled water supply. Overall, the assembly of chiller systems allows them to provide higher power output enhancement and much lower temperature. Companies such as Stellar Energy and TAS Energy Inc. have designed complete chiller system packages and are among the leading suppliers of chillers globally. Decrease in the output of gas turbines, especially during the summer seasons, has compelled power companies to retrofit their turbines with inlet cooling systems.
Inlet fogging is one of the most widely used methods of evaporative cooling. Inlet fogging systems are easy to install and low cost as compared to other turbine inlet cooling technologies. Utilization of fogging systems increases the turbine output by nearly 10%, making it one of the low cost and effective turbine inlet cooling technologies. Currently, turbine inlet fogging systems are installed in hundreds of gas turbines all over the world. Mee Industries, Inc. is one of the major provider of turbine inlet fogging systems and offers inlet cooling solutions globally.
Similar to inlet fogging, wet compression is also an evaporative cooling technology. Wet compression is a complementary technology utilized to provide added benefits to existing evaporative cooling technologies. In wet compression more fog is added. The air containing the excess fog enters the compressor in the combustion turbine, where droplets are evaporated which leads to cooling of air and increase in air mass. However, it is a relatively newer technology and is costlier than inlet fogging. Companies such as Siemens AG and Caldwell Energy Company Inc. are major providers of wet compression systems.
Key participants in the global turbine inlet cooling systems market include American Moistening Company Inc., Caldwell Energy Company Inc., Cat Pumps Inc., Humifrio S.L., Mee Industries Inc., Score Energy Limited, Siemens AG, UTC Technologies Company, Camfil AB, and Baltec IES Pty. Ltd. This report provides an overview of these companies, followed by their financial revenues, business strategies, and recent developments. Overall, the investment outlook for the turbine inlet cooling system market is positive globally with a slightly greater preference for mechanical chiller installations. The global market for inlet cooling systems has been segmented as follows:
Turbine Inlet Cooling Systems Market: Technology Analysis
Turbine Inlet Cooling Systems Market: Regional Analysis
Rest of North America
Rest of Europe
Transparency Market Research (TMR) is a market intelligence company, providing global business information reports and services. Our exclusive blend of quantitative forecasting and trends analysis provides forward-looking insight for thousands of decision makers. TMR's experienced team of Analysts, Researchers, and Consultants, use proprietary data sources and various tools and techniques to gather and analyze information.
Our data repository is continuously updated and revised by a team of research experts, so that it always reflects the latest trends and information. With a broad research and analysis capability, Transparency Market Research employs rigorous primary and secondary research techniques in developing distinctive data sets and research material for business reports.
Transparency Market Research
90 State Street, Suite 700
Albany, NY 12207
USA - Canada Toll Free: 866-552-3453
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Turbine Inlet Cooling Systems here
News-ID: 419928 • Views: 522
More Releases from Transparency Market Research
System on Chip (SoC) Market : Dynamics, Segments and Supply Demand with Forecast …
Overview: TMR’s report on the System on Chip (SoC) Market is an all-important tool for market stakeholders in their pursuit to discover avenues for innovation, and further, undertake strategic planning for the launch of products and services. The System on Chip (SoC) Market is likely to show an optimistic CAGR of ~8.4% within a forecast period 2017 - 2025. It is expected to reach US$89.03 bn by the forecast period 2017 -
Conveyor System Market : Current Trends and Future Aspect Analysis with Forecast …
Overview: TMR’s report on the Conveyor System Market is an all-important tool for market stakeholders in their pursuit to discover avenues for innovation, and further, undertake strategic planning for the launch of products and services. The Conveyor System Market is likely to show an optimistic CAGR of ~3.5% within a forecast period 2017 - 2025. It is expected to reach US$6312.5 mn by the forecast period 2017 - 2025. Browse Our Report @
NFC Chips Market : Development Insight and Manufacturers Challenge Competitors; …
Overview: TMR’s report on the NFC Chips Market is an all-important tool for market stakeholders in their pursuit to discover avenues for innovation, and further, undertake strategic planning for the launch of products and services. The NFC Chips Market is likely to show an optimistic CAGR of ~26.0% within a forecast period 2016 - 2024. It is expected to reach US$10.62 bn by the forecast period 2016 - 2024. Browse Our Report @
Load Cell Market : Key Players and Production Information analysis with Forecast …
Overview: TMR’s report on the Load Cell Market is an all-important tool for market stakeholders in their pursuit to discover avenues for innovation, and further, undertake strategic planning for the launch of products and services. The Load Cell Market is likely to show an optimistic CAGR of ~3.50% within a forecast period 2016 - 2024. It is expected to reach US$2.55 bn by the forecast period 2016 - 2024. Browse Our Report
More Releases for Inlet
Global Turbine Inlet Cooling System Market 2019-2025
Press Release – 24 Jan 2019 Research and Development News -- . . Latest Update "Global Turbine Inlet Cooling System Market Insights,Forecast to 2025" with Industries Survey | Global Current Growth and Future. ' ' Turbine Inlet Chilling (TIC) is a system of air conditioning for a gas turbine to maximize the gas turbine output across all ambient conditions. This system can use water or forced air as the form of cooling. The Turbine Inlet
Turbine Inlet Cooling Systems Market Growth And Forecast 2022
The research report, titled "Global Turbine Inlet Cooling Systems Market Report 2022," offers an unmistakable understanding of the topic. The exploration report tries to appreciate the leading-edge techniques taken by vendors in the overall market to offer product detachment through Porter's five forces analysis. It likewise points out the courses in which these associations can strengthen their stand in the market and increment their livelihoods in the coming years. Consistent
Turbine Inlet Cooling Systems Market Share And Current Trends by 2022: by Techno …
"The Latest Research Report Turbine Inlet Cooling Systems Market by Technology - Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2014 - 2022 provides information on pricing, market analysis, shares, forecast, and company profiles for key industry participants. - MarketResearchReports.biz" Rising demand for energy is driving the construction of new power plants globally. Despite the prevailing economic slowdown, demand for power is expected to grow on account of urbanization
Turbine Inlet Cooling System new booming trends in 2022
The Global Turbine Inlet Cooling System Market Research Report provides detailed analysis of the key regional market status of the Turbine Inlet Cooling System Industry. According to Stratistics MRC, the Global Turbine Inlet Cooling System market is expected to grow from $3.839 billion in 2016 to reach $5.525 billion by 2022 with a CAGR of 6.2%. Some of the factors propelling the market growth are growing need of energy and power
Turbine Inlet Cooling Systems Market - Industry Analysis 2022 | Research Report
Increasing energy demand is boosting the construction of new power plants which has a marked impact on the global gas turbine market. Growth in the orders of gas turbines is expected to have a high impact on the gas turbine inlet cooling systems market, especially in areas with hot climate. Decrease in inlet air density during the hotter climates reduces the plant efficiency, which in turn, results in power shortages
Global Turbine Inlet Cooling Systems Market 2017-2021
MarketResearchReports.Biz presents this most up-to-date research on "Global Turbine Inlet Cooling Systems Market 2017-2021" Description Turbine inlet cooling systems help in improving the efficiency and performance of gas turbines. Cooling technologies involved include mechanical chillers, inlet fogging, wet compression, hybrid systems, and others. Technavios analysts forecast the global turbine inlet cooling systems market to grow at a CAGR of 3.98% during the period 2017-2021. Covered in this report The report covers the present scenario and