openPR Logo
Press release

Techsil’s new Glob Top adhesives deliver better flow control and precise dispensing

01-13-2017 11:46 AM CET | Business, Economy, Finances, Banking & Insurance

Press release from: Techsil Ltd

Glob top encapsulation of chips using Vitralit UD 8050

Glob top encapsulation of chips using Vitralit UD 8050

Formulated specifically for the consumer and general electronics industry, Techsil introduces two new adhesives with a low halogen content: Vitralit® UD 8050 and Structalit® 8838 provide encapsulation of electronic components on PCBs and allow better flow control and precise dispensing on individual components due to their intrinsic viscosity.

Glob top adhesives are sealing compounds and encapsulants used in electronics to protect sensitive electronic components typically in chip on board (COB) applications. Glob tops protect components from environmental ingress such as moisture, dust, dirt and solvents and also mechanical strain and scratching. These two new glob top adhesives from manufacturer Panacol have the following key characteristics:

Vitralit® UD 8050 is an acrylic-based one-component adhesive which, thanks to its easy dispensing ability and rapid curing, is especially suitable for use in the consumer electronics sector, in which a high throughput is necessary. Exposed to UV light, Vitralit® UD 8050 cures within seconds. Being dual UV and moisture curing, Vitralit® UD 8050 will also fully cure in shadowed areas not reached by the UV light, thereby increasing the performance of the hardened adhesive. For enhanced process control, a version with fluorescent marker is also available.

Structalit® 8838 is a black epoxy-based one-component adhesive. Its key characteristics are a low glass transition temperature, good flexibility and fast thermal curing. Once cured, Structalit® 8838 is the perfect solution for flexible encapsulation of electronic components. Temperature and moisture tests have proved that the adhesive does not impair the properties of individual components.

Both Vitralit® UD 8050 and Structalit® 8838 allow better flow control and precise dispensing on individual components due to their intrinsic viscosity. Both of these adhesives are compatible with fluxing agent and can therefore ensure full, effective curing on electronic components. With a low halogen content, they fulfil international electronic grade standards regarding corrosion prevention of electronic components.

For more information a technical datasheet or for a sample contact: technical@techsil.co.uk

About Techsil
Trading since 1989, UK based Techsil has grown into a global supplier of industrial RTV silicones, adhesives, sealants, encapsulants, conformal coatings, tapes, casting and mould making materials to a wide range of manufacturing industries including Aerospace, Automotive, Medical, Electronics, Packaging, LED Lighting and Rapid Prototyping.

Techsil Limited
34 Bidavon Industrial Estate
Waterloo Road
Bidford on Avon
Warwickshire
B50 4JN
England

Tel: +44 1789 773232
Fax: +44 1789 774239
www.techsil.co.uk
sales@techsil.co.uk

Press Contact: Jane Powell, jane@techsil.co.uk

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Techsil’s new Glob Top adhesives deliver better flow control and precise dispensing here

News-ID: 411561 • Views: 222

More Releases from Techsil Ltd

The Future is Orange - Techsil Launch New Biocompatible Plastics Adhesive which …
Adhesive specialists Techsil introduce a new orange, fluorescing, UV curing adhesive designed for bonding plastics. Manufactured by Panacol, Vitralit® 7311 FO is certified according to USP Class VI standards. A perfect adhesive for medical devices but it can also be used in electronics, optics and general assembly. Vitralit® 7311 FO is a transparent acrylic adhesive that cures under UV or visible light. It offers very high bond strength to many
Techsil Launch New Optically Clear Flexible Adhesive for Bonding Displays
Adhesive suppliers, Techsil have launched a new optically clear, low viscosity, UV curable adhesive into the UK market. Manufactured by Panacol, Vitralit® 50004 is a one-component acrylic adhesive so it requires no mixing. The adhesive has been designed to use for bonding display screens and laminating optics. Vitralit® 50004 adheres to a variety of substrates including coated glass, PET and other plastics and films. Its low viscosity means that it can
New Epoxy Potting Compound with Excellent Flow Properties
UK adhesive specialists Techsil have launched a new potting compound for electronics with medium viscosity and small filler particle size: Structalit® 5894-1 is the perfect choice for large-volume potting or glob top sealing of power electronics. Structalit® 5894-1 is a black, one part epoxy resin which requires no mixing. The combination of optimised viscosity and the small particle size of its fillers means it flows well and makes an excellent electrical
Momentive’s Aerospace Silicones from Techsil Offer Low Outgassing and Thermal …
Momentive have just published 2 new product selection guides for their aerospace silicone adhesive sealants. They are Silicone RTVs for Low Outgassing Applications which are advanced silicones that deliver outstanding performance with minimal outgassing and Silicone RTV’s for Thermal Protection Systems which are a broad range of advanced silicone RTVs that can perform in the most extreme conditions. For more than 60 years, Momentive has been part of the journey into space

All 5 Releases


More Releases for Vitralit

UV Adhesives Market 2022; Global Key Vendors - Henkel AG, BASF SE, 3M Company, A …
UV Adhesive Market – Overview UV-curing adhesive is particularly suitable for the production of glassware, glass furniture and acrylic glass, as well as for products in the optical industry and in medical technology. Loctite provides UV-adhesive with medical clearance especially for this purpose. Owing to the efficacy the UV Adhesives demonstrates, it is widely used across a diverse range of industrial sectors. Based on the industries and its use, UV Adhesives
UV Adhesives Market 2018: key Players The 3M Company, Henkel AG & Co. KGaA, H.B …
The medical sector, unquestionably, is one of the most opportunistic application arenas of UV adhesives market. These products form lasting bonds in syringes, filters, hypodermic needles, intravenous tube and catheters. In this regard, it is important to mention that when it comes to medical device manufacturing adhesives, the choice of curing method is the most important factor that makes the difference. As disposable medical products are mostly produced in bulk,
Positive aspects of "UV Adhesives Market" & future challenges analysis 2017 - 20 …
MarketStudyReport.com Add New Global UV Adhesives Market by Manufacturers, Countries, Type and Application, Forecast to 2024 to its research database. The report presents a deep study of the market growth factors and drivers. The report spread across 270 pages with table and figures in it. UV Adhesives Market will cross USD 1.5 billion by 2024, according to a new research report. The medical sector, unquestionably, is one of the most opportunistic application
UV Adhesives Market 2018 | Key Players, Product and Production Information Analy …
Industry/ Innovation/ Related News: November 2016 – H. B. fuller has launched two new water-based adhesives, containing a UV fluorescing agent, developed to help corrugators who are investing to achieve zero defects in their production lines. The new product launch would help H.B. fuller to attract the consumer and hence increase its market share. August 2016 – Panasonic Corporation announced that it has developed a "Time-lagged UV Curing Adhesive (Fine Glue)" suitable
New UV-curing Epoxy Resin Adhesive for Dome Coatings
Adhesive company Techsil introduce Vitralit® UC 6686 a newly developed light curable epoxy adhesive from manufacturer Panacol. Upon exposure to ultraviolet light, it cures in seconds to form a crystal clear, extremely hard, scratch resistant surface perfect for dome coatings and for decorating glass and plastics. Vitralit® UC 6686 is an epoxy resin based single-component adhesive, which cures rapidly under UV light. Developed especially for dome coatings, its high viscosity makes
New UV-adhesive for Bonding Elastomeric Materials
Techsil presents a new solvent free UV-adhesive from German manufacturers Panacol. Vitralit® VBB-2N LV features low viscosity and is ideally suited for bonding elastomeric materials. Elastomeric materials and rubbers all differ in their polymer structure, polarity, and surface properties. This makes them very difficult to bond and there are drawbacks with using traditional adhesive systems. Cyanoacrylates offer an easy bonding solution, but have decisive drawbacks; they become brittle quickly and exhibit